Control Techniques servo products offer high performance combined with maximum flexibility. The drives can connect to a wide range of motion controllers through I/O or dedicated communication networks such as SERCOS and EtherCAT or alternatively, take control of the automation system through the drives integrated motion controller.
Control Techiques offers a full range of servo motors in a variety of choices to meet your needs. The Unidrive FM motor series is a high quality motor with many configuration and feedback options. The NT motor has an advanced motor design offering a compact footprint with high torque and low inertia -- ideal for dynamic applications. The XV motor is perfect for cost-sensitive applications that still require servo performance.
Digitax ST
0.72 to 18.8Nm (Peak 56.4Nm)
230V / 460V Servo Drive System
Digitax ST servo drives are optimized for pulse duty servo applications requiring high peak torque (up to 300% peak), dynamic response, ease of use and flexible integration features. Digitax ST drives are perfectly matched for use with Unimotor hd servo motors.
Unidrive SP can control a wide range of industrial motors. In servo mode, the drive operates as a high performance servo amplifier, matched to the Unimotor FM range and optimized for continuous duty applications due to its high continuous output rating. Typical continuous duty applications include printing, winding and labeling.
Unimotor hd is Control Techniques’ high dynamic brushless AC servo motor range, designed for operation with Digitax ST, Unidrive SP and Epsilon EP drives.
Unimotor hd is a high peak torque, low inertia motor range. Designed for high dynamic applications requiring hard accelerations and decelerations including:
Unimotor fm is a high performance brushless AC servo motor range matched for use with Control Techniques drives. ‘FM’ stands for flexible motor, designed to accommodate a wide range of applications. The motors are available in seven frame sizes with various mounting arrangements and motor lengths.
Unimotor fm provides high-precision over an extended duration requiring lower acceleration and deceleration rates. The motor is optimized for high stability in precision profiling applications including:
The compact, easy-to-use Epsilon EP servo drive is scalable from a simple amplifier to a completely programmable 1.5-axis motion controller. For added application flexibility, the Epsilon EP is available in three models: Epsilon EP-B (base), Epsilon EP-I (indexer), and Epsilon EP-P (programming). Each model is available with five drive power stages: 2.2A, 4.0A, 6.5A, 9.0A and 16.0A. This provides the capability to deliver over 198lb-in (22.4Nm) of torque at the rated motor speed and 396lb-in (44.8Nm) of peak torque for high demanding, pulse-duty applications. The Epsilon EP offers four of the most popular network connections for industrial controls: RS485 (with standard Modbus RTU interface) is on all models allowing interfacing to PC tools, simple HMI’s and drive-to-drive configurations. Optional ProfiBus DP and DeviceNet communication configurations are available for system integration to common PLC platforms. EtherNet (standard on every Epsilon EP-P) opens up a world of interfacing possibilities (see the communications section under the Options tab for more information).
Features:
1. Integrated Control
Our Epsilon EP servo drive product line offerings include integrated motion control solutions. The Epsilon EP product line offers product scalability with base, indexer and programming variants.
Variants and their respective solutions include:
Epsilon EP- P - Programmable - Create complete user programs to sequence the motion control
Epsilon EP- I - Indexer drive - Position controller provides Home, Index, and Jog motion profiles
Epsilon EP - Base drive - Ideal for servo applications utilizing an external motion controller
2. Performance Advantage
Control Techniques has incorporated several advanced features and capabilities in the Epsilon EP family to make these drives even more powerful and easier to use. The key features are incorporated into the four variants of this product line. The four variants are:
Epsilon EP-B – Base
Epsilon EP-I or EP-IDN – Indexer
Epsilon EP-P, EP-PDN and EP-PPB – Programming
Specifications and Dimensions
1. Power Requirements
AC Input Voltage, 47-63 Hz EP 202/204/206: 1Ø, 20 to 264 VAC EP 209: 1Ø, 90 to 264 VAC EP 216: 3Ø, 90 to 264 VAC (240 VAC for rated performance) SCCR 10kA
DC Input Voltage EP 202/204/206: 10-340 VDC EP 209/216: 140-340VDC
AC Input Current (max. continuous) EP202: 5.0 Arms (140A for 2 ms inrush) EP204: 8.5 Arms (140A for 2 ms inrush) EP206: 12.0 Arms (140A for 2 ms inrush) EP209: 16 Arms (34A for 5 ms inrush) EP216: 16 Arms (34A for 5 ms inrush)
The compact, easy-to-use Epsilon EP servo drive is scalable from a simple amplifier to a completely programmable 1.5-axis motion controller. For added application flexibility, the Epsilon EP is available in three models: Epsilon EP-B (base), Epsilon EP-I (indexer), and Epsilon EP-P (programming). Each model is available with five drive power stages: 2.2A, 4.0A, 6.5A, 9.0A and 16.0A. This provides the capability to deliver over 198lb-in (22.4Nm) of torque at the rated motor speed and 396lb-in (44.8Nm) of peak torque for high demanding, pulse-duty applications. The Epsilon EP offers four of the most popular network connections for industrial controls: RS485 (with standard Modbus RTU interface) is on all models allowing interfacing to PC tools, simple HMI’s and drive-to-drive configurations. Optional ProfiBus DP and DeviceNet communication configurations are available for system integration to common PLC platforms. EtherNet (standard on every Epsilon EP-P) opens up a world of interfacing possibilities (see the communications section under the Options tab for more information).
Features:
Whether the drives are utilized in base drive only applications or with a closed loop controller, setup can be achieved in just minutes with our Windows™-based PowerTools Pro software. The use of a State-Space algorithm makes tuning very simple and forgiving. Base drive features include:
Programmable I/O • 5 optically-isolated inputs (1 dedicated) • 3 optically-isolated outputs • 1 analog input ±10 VDC, 14-bit • 2 analog output ±10 VDC, 10-bit Programmable encoder output, (up to 8,192 lines per revolution) Separate stop and travel limit deceleration ramps Torque, Travel, Following Error and velocity limits 8 user defined speed presets with individual acceleration/deceleration rates 2 Programmable Torque Level Outputs In Motion Velocity Output Software Oscilloscope Position Tracker™ – Analog Mode Analog Torque Mode Analog Velocity Mode Digital Velocity Preset
Specifications:
Power Requirements
AC Input Voltage: 3Ø, 187 to 528 VAC, 47 - 63 Hz (460 VAC for rated performance)
AC Input Current MP-1250: 17 Arms (15A @ 100 ms soft start) MP-2500: 35 Arms (15A @ 100 ms soft start) MP-5000: 70 Arms (15A @ 100 ms soft start)
Output Continuous Current MD-404: 4 Arms/2.8 Arms (5 kHz/10 kHz) MD-407: 7 Arms/5 Arms MD-410: 10 Arms/6.5 Arms MD-420: 20 Arms/14 Arms MD-434: 34 Arms/22 Arms (Current ratings the same for 460V or 230V operation)
Output Peak Current MD-404: 8A/5.6A (5 kHz/10 kHz) MD-407: 14A/10A MD-410: 20A/13A MD-420: 40A/28A MD-434: 68A/44A (Current ratings the same for 460V or 230V operation)
6.3 to 166.4 lb-in (499lb-in peak); 0.72 to 18.8Nm (56.4Nm peak) 055 to 115 Frames
Unimotor hd is a high dynamic brushless AC servo motor range designed for operation with Digitax ST, Unidrive SP and Epsilon EP drives.
This high peak torque, low inertia motor range is designed for high dynamic applications requiring hard accelerations and decelerations including:
Flying shear
Pick and place
Cut-to-length
Unimotor hd motors are perfectly matched to Digitax ST servo drives.
Features:
Compact servo motor:
Unimotor hd provides an exceptionally compact, low inertia solution for applications where very high torque is required during rapid acceleration and deceleration profiles.
High torque:
The Unimotor hd torque profile is matched to Digitax ST servo drives, providing up to 300% peak overload for maximum dynamic performance.
6.3 to 1200 lb-in (3611 lb-in peak); 0.72 to 136Nm (408Nm peak) 055 to 250 Frames
Unimotor fm is a high performance brushless AC servo motor range matched for use with Control Techniques servo drives. The ‘fm’ stands for Flexible Motor and is designed to accommodate a wide range of applications. The motors are available in seven frame sizes with various mounting arrangements and motor lengths.
Unimotor fm provides high-precision over an extended duration requiring lower acceleration and deceleration rates. The motor is optimized for high stability in precision profiling applications including:
Printing
Winding
Labeling
Unimotor fm motors are perfectly matched to Digitax ST servo drives.
Features:
1.Wide torque range
Unimotor fm offers the widest torque range, from 0.72Nm - 136Nm
2.Maximum flexibility
Flexibility of the Unimotor range ensures the best fit for your application, options include:
Various feedback devices to be used. As standard an incremental encoder is fitted as this offers an optimum balance of cost and performance. SinCos, EnDAT and Hiperface can be selected for increased resolution and Resolver feedback is available for increased reliability in extreme environments
High inertia versions are available to allow the motor inertia to be more closely matched to the load inertia for increased performance and stability
Motor brakes may be integrated within the motor. A choice of parking brake or high energy dissipation brake is available
NT Motors-Economical High Performance Servo Motors
230V
7.5 to 56 lb-in (0.85 to 6.3 Nm)
The NT Motor is an economical, high performance motor manufactured to maximize torque and minimize size. The NT motor uses powerful Neodymium magnets and is manufactured with a segmented core to maximize stator efficiency and further reduce size.
Features:
Very low inertia for applications that demand high acceleration and cycle rates
English (NEMA 23 or 34) or Metric (IEC-72-1) flanges
With or without holding brakes
The standard encoder resolution is 2048 lines per rev.
NT motors can be ordered with MS style connectors, 1 meter Flying Leads or 1 meter Flying Leads with MS connectors or Direct Connect*
The XV Servo Motor series is a high-performance, low inertia, and high torque in a compact motor package. It offers a low cost solution with the features of a premium priced servo offering. Intended for higher throughputs and smaller machines, XV motors are available in 4 Frame Sizes: 40, 60, 80 and 130 mm with speeds ranging from 2000 to 5000 rpm. Applications with Continuous Torque requirements up to 101 lb-in (11.4 Nm) are the perfect match for the XV motors.
Features
Compact high-performance low inertia and high torque motor.
Low cost solution.
Good for applications with continuous torque requirements.
Manufacturing and exporting environmental control units such as environmental control systems, pollution control units, air pollution control systems, pollution control equipments, industrial environmental control units, environmental control equipments.
Engaged in manufacturing and supplying of control equipments, electrical control equipments. Also supplies distribution panels, AMF panels, APFC panels, auto main failure panels, motor control centers, power control centers and harmonic analysis.
Processing...
