 |
|
Our clients can avail from us a wide range of zinc oxides. These are available at various composition and at very affordable rates. We also deals in trading of Brass, Zinc Dross and Copper. Our product range includes:
|
| |
The Zinc Oxide Grade (99.0%) available with us is formulated as per the international standards and are extensively used in different industries owing to its 0.35 loss on ignition at 950ºC, % by mass (max.). Our range bears a pH value (10gm/100ml) of 5.0 - 8.0 and finds wide application in rubber industries for preparing: • Rubber gloves
• Rubber foot wears
• Rubber hosepipes
• Car rubber mats
• Rubber seals
• Domestic & Industrial rubber products Specification: | Sr.No | Characteristics | UI - III | | 1 | Color & Appearance | White Powder | | 2 | Zinc Oxide as ZnO, % by mass(min.) | 99 | | 3 | Sieves Residue retained, % by mass through 325 mesh (45 microns max.) | 0.1 | | 4 | Surface Area, Sq. meter/gm, Standard | 4.0 - 6.0 5.0 | | 5 | pH value ( 10gm/100ml) | 5.0 - 8.0 | | 6 | Loss on Ignition at 950ºC, % by mass (max.) | 0.35 | | 7 | Relative density/ Sp. Gravity, at 27/27ºC | 5.50~5.65 | | 8 | Moisture content/ Heat loss at 105ºC ± 2ºC for Two hours, %by mass (max.) | 0.2 | | 9 | Matter Insoluble in HCl, % by mass (max.) | 0.05 | | 10 | Lead Content (Pb), Max.(ppm) | 2500 | | 11 | Cadmium content(Cd), Max.(ppm) | 20 | |
| |
We are available with Zinc Oxide 99.7% that is used as raw material to produce zinc phosphate as steel coating. Our range is white in appearance and carries a pH value (10gm/100ml) of 5.0 - 8.0. The surface area of this zinc oxide is 4.0 - 6.0 Sq. meter/gm. Over the years we have been successfully catering our broad client base with our exclusive range that finds wide application in the following: • Ferrites
• Cosmetics
• Plastics
• Pigment
• Ointment pigment and ceramics
• Floor tile
• Glass
• Chemicals such as zinc salts (zinc stearate etc.) feed additive
• Electronic devices
• Electronic ceramics
• Raw material to produce zinc phosphate as steel coating. Specifications: | Sr.No. | Characteristics | UI - I | | 1 | Color & Appearance | White Powder | | 2 | Zinc Oxide as ZnO, % by mass(min.) | 99.7 | | 3 | Sieves Residue retained, % by mass through 325 mesh (45 microns max.) | 0.01 | | 4 | Surface Area, Sq. meter/gm, Standard | 4.0 - 6.0 5.0 | | 5 | pH value ( 10gm/100ml) | 5.0 - 8.0 | | 6 | Loss on Ignition at 950ºC, % by mass (max.) | 0.35 | | 7 | Relative density/ Sp. Gravity, at 27/27ºC | 5.50~5.65 | | 8 | Moisture content/ Heat loss at 105ºC ± 2ºC for Two hours, %by mass (max.) | 0.2 | | 9 | Matter Insoluble in HCl, % by mass (max.) | 0.05 | | 10 | Lead Content (Pb), Max.(ppm) | 200 | | 11 | Cadmium content(Cd), Max.(ppm) | Nil | |
| |
The Zinc Oxide Grade (99.5%) manufactured by us is widely used in the Tire & Rubber industries worldwide and carries a pH value of 5.0 - 8.0. It is 0.05% insoluble in HCl and is white in color. Our exclusive range is checked on stringent quality parameters and finds application in: • Ceramics
• Paints
• Lubricant
• Greases Specification: | Sr.No. | Characteristics | UI - II | | 1 | Color & Appearance | White Powder | | 2 | Zinc Oxide as ZnO, % by mass(min.) | 99.5 | | 3 | Sieves Residue retained, % by mass through 325 mesh (45 microns max.) | 0.05 | | 4 | Surface Area, Sq. meter/gm, Standard | 4.0 - 6.0 5.0 | | 5 | pH value ( 10gm/100ml) | 5.0 - 8.0 | | 6 | Loss on Ignition at 950ºC, % by mass (max.) | 0.35 | | 7 | Relative density/ Sp. Gravity, at 27/27ºC | 5.50~5.65 | | 8 | Moisture content/ Heat loss at 105ºC ± 2ºC for Two hours, %by mass (max.) | 0.2 | | 9 | Matter Insoluble in HCl, % by mass (max.) | 0.05 | | 10 | Lead Content (Pb), Max.(ppm) | 2000 | | 11 | Cadmium content(Cd), Max.(ppm) | 10
| |
|
We expertise in exporting a comprehensive Zinc Oxide Grade (95.0%). The zinc oxide is formulated using proper method |
|
Our Products
|
|
