Conductivity Indicators,TDS Indicators,Conductivity Controller

Conductivity Indicators And Controllers

We are engaged in manufacturing and supplying Conductivity Indicators and Controllers like conductivity indicators, tds indicators, conductivity controller etc, that are in wide demand in the domestic as well as overseas markets. These include conductivity indicators, tds indicators, conductivity controller & TDS Indicator. Our Conductivity Indicators and Controllers have precision indication of conductivity to ensure optimum performance and durability.

Our range of Conductivity Indicators and Controllers encompasses following:

Conductivity/TDS Indicator - Model 5500

We provide Conductivity & TDS Indicator Model 5500, that is available with Automatic Temperature Compensation @2%/˚C using PT-100. The machine reads the T.D.S in PPM and is offered with Bright RED LED display. To select Range, cell factor and T.D.S, our Conductivity & TDS Indicator Model 5500 are available with Front panel ‘touch type’ membrane switches. Following are the features of Conductivity & TDS Indicator Model 5500:

Precision indication of conductivity
Front panel 5 range selector from 199.9ms to 19.99µs
Cell factor selectable, 1.0 OR 0.1 with front panel calibration facility

Our Conductivity & TDS Indicator Model 5500 has the below mentioned technical specifications:

Display	3½ Digit 0.5” RED LED display
Range	19.99ms 199.9ms 1999 µs - 0.1 Cell Factor 19.99ms -1.0 Cell Factor 199.9µs 1999µs 19.99µs 199.9µs Selectable by a touch switch & indicated by respective LED lamp
Resolution	0.01ms or 0.01µs depending on range & Cell factor
Accuracy	± 0.5% of F.S. ± 1 Least Significant Digit
Sensor	‘Contact type’ with Cell Constant 0.1 or 1.0. The Cell constant can be selected from the front panel touch switch - ‘Cell factor’
TDS	Total Dissolved Solid factor can be read directly in PPM on the 3^rd range (1999µs/cm) by touching the front panel ‘TDS’ switch
Temperature	Uses PT-100, precision temperature sensor (external). The compensation: Compensation is internally set at 2% per ˚C with reference at 25˚C. NOTE: If PT-100 is not available, then fix a simulated resistance of PT-100 at 25˚C, approximately 110Ω Instrument will not work otherwise.
Supply	220V AC ± 15% @ 50Hz/60Hz
Size	Front Fascia – 96mm x 96mm, Cut -Out – 92mm x 92mm
Cabinet	Powder coated metallic cabinet

Send Your Enquiry

Conductivity Controller - Model 110-COND

We are offering Conductivity Controller Model 110-COND that is available with automatic temperature compensation. Our Conductivity Controller Model 110-COND has a ‘Cell Adjust’ on front panel for calibration. We also offer our controllers with 4 Step Range selection 0.1µs to 199.9 ms and 2 independent Set Points with High and Low logics for on-line control. Following are some of the other features of our Conductivity Controller Model 110-COND:

Precision indication of conductivity
Front Panel ‘touch type’ membrane switch to read the limits set.
Voltage corresponding to Conductivity available for external recorder.

Our Conductivity Controller Model 110-COND is offered with following technical specifications.

Display	3½ Digit LCD
Range	199.9µs 1999µs 19.99ms 199.9ms The range is selectable from the rear and can be calibrated by ‘Cell Ad’ at the front for individual range
Resolution	0.1µs to 0.1ms depending on range selected
Accuracy	± 0.5% of Full Scale ± 1 Least Significant Digit.
Sensor	‘Contact Type’ with Cell Constant 1.0
Temperature	Uses PT100, precision temperature sensor (External). Compensation: The Compensation is internally set at 2% per ˚C NOTE: If PT100 is not available, then fix a simulated resistance of PT100 @ 25˚C approx. 110Ω. Instrument will not work otherwise
Limit Setting	Using 2 Nos. 10 turn precision trim pots on front panel to set the High/Low Limits
Control Output	Two set of NO-P-NC, 5 Amps potential free Relay Contacts. a. Relay 1 (High) ON, for Conductivity > High Limits b. Relay 2 (Low) ON, for Conductivity < Low Limit
Recorder Output	0-2V for the selected range Max. current output capability 2mA
Supply	110V AC/220V AC ± 15% internally selectable
Size	Front Fascia-96 mm x 96mm Cut out – 92mm x 92mm
Cabinet	Flame retardant grade Plastic enclosure

Send Your Enquiry