We bring for our clients our digital tachometer that is available in model no- CT 500. The features of these tachometer include:
Multi-function: One instrument combines photo tachometer (RPM) & contact tachometer (RPM & m/min), wide measurement range from 15 RPM to 75,000 RPM., the last measured value is automatically stored in memory when the 'measure' button is released, high contrast LCD display with leading zero blanking gives the exact RPM.

The other features include:

• The battery consumption is very low. In Non-measure mode i.e. the measure button is released (memory ON), the battery consumption is still lower.
• This tachometer uses an advanced Micro Computer LSI Circuit with Quartz Crystal time base to give high accuracy and fast measurement.
• A high intensity RED LED for photo tachometer gives a visible low current consumption beam. Unlike a filament bulb, an LED has almost infinite life.
• The use of a durable, strong ABS plastic housing assures maintenance free performance for many years. This housing fits comfortably in the palm of the user.
  

We manufacture and offer digital timers that are used in diverse commercial applications. Based on our immense technical expertise, we are able to provide timers in custom-made designs and sizes to suit different needs of our clients. Our digital timers have the following features:

• 4 different timing ranges of 99.99 sec, 999.9 sec, 99 Mins 59 Secs, 99 Hrs 59 Mins.
• Press to start/Power On start/Cyclic modes settable.
• Delayed On/Off programmable by user from front panel.
• Up/Down time counting user settable, user settable starting On/Off time for cyclic mode.
• Number of cycles settable for cyclic mode.
• Non-volatile memory to save configuration and timing.
• Configuration lockable by rear jumper.
• Front Reset/Start switch with parallel terminals at rear.
• Aesthetically designed panel with membrane switches.

Avail from us, the digital counters manufactured by us that are based on micro controller based designs and feature user friendly keyboard operation.These are programmable counters that feature:

• 6 Digit Preset Counter.
• Dual Limits settable with dual relay output.
• Programmable Scale Factor of 0.001 to 999.999.
• Pre-settable Batch Counter.
• Cumulative 6 digit counter.
• Up/down counting selectable.
• Normal/auto-reset with time setting.
• Non-volatile memory to hold settings and counts.
• Program configuration lock at rear and external setting for slow/fast for noiseless operation.

We manufacture and offer digital temperature controllers that are universal temperature controller with 2 set points. The salient features of our products include:

• Microprocessor based controller.
• Linearised for PT100 sensor & 3 thermocouples (J,K,R) with auto cold junction compensation.
• Separate displays for temperature and set point.
• Separate heater & cooler/alarm logic relays.
• Offset digitally programmable from front.
• Configuration lockable by rear jumper.
• Proportional On-Off control user selectable.
• User programmable hysteresis band.
• Percentage on time settable to avoid overshoots and save power.
• Non-volatile memory to save settings and aesthetically designed front panel with membrane switches.

Our humidity controllers are digital humidity controller using dry/ wet PT-100 Sensors. Based on cutting edge technology, these humidity controllers are used in a variety of applications across the globe The varied features include:

• MP based direct display of temperature & humidity.
• No need for look up tables and employs classical dry & wet bulb RTD (PT-100) sensors.

The pH controllers that we manufacture are Dual Limits pH Controller with ISO 4-20mA Tx Output. The different features that these pH controllers offer are: 

• Model 100 pH Controller is panel mounted DIN size instrument with 3½ digit LCD.
• Indicates pH when attached to a pH electrode. The membrane key pad mode switch in front allows indication of normal pH.
• Limits for acid/base together with additional alarm limits for acid/ base.
• In addition a consent contact output is provided to be used in conjunction with an ORP controller for ORP dosage. The equipment also provides an Isolated 4-20mA output for recorder purpose.

We have for our clients our conductivity controllers that are programmable amp-hour meter. The varied specifications of our conductivity controllers include:

• Current Integrated Display.
• 4 DIG AMP-HOUR (Selectable: AH , 0.1 AH, AMin & 0.1 Amin).
• Presentable Limit for Amp-Hour with Relay Out.
• 6 Digit Totalizer AH Stored in EEPROM & Front Resettable.
• Displays Current in Amps.
• Lockable Scale Factor -CAL- for Various Shunts.
• Signal Input in mV from current shunt of 75mV/Amp.
• Application in Constant Thickness Electroplating which is Proportional to Preset AH Limit.
• Irrespective of Voltage/ Current Variation.
• Simultaneous Input for mV (from Current Shunt) and Battery Voltage.
• To measure the AH of a chargeable battery when voltage falls to factory settable limit (usually 10.5V for 12V Batt)

We manufacture ampere hour meter that are programmable Amp-Hour Meter. The varied specifications of these meters include:

• Current Integrated Display.
• 4 DIG AMP-HOUR (Selectable: AH0, 0.1 AH, AMin & 0.1 Amin).
• Presentable limit for Amp-Hour with relay out.
• 6 Digit Totalizer AH Stored in EEPROM & Front Resettable.
• Displays Current in Amps.
• Lockable Scale Factor -CAL- for Various Shunts.
• Signal Input in mV from Current Shunt of 75mV/Amp.
• Application in Constant Thickness Electroplating which is Proportional to Preset AH Limit
• Irrespective of Voltage/ Current Variation
• Simultaneous Input for mV(from Current Shunt) and Battery Voltage
• To measure the AH of a chargeable battery when voltage falls to Factory Settable Limit (usually 10.5V for 12V Batt)
  

Our specialty in manufacturing and exporting highly Intelligent Product Target Display Board that are widely used in common wealth games happens at various parts of the world. These are specially designed for the international events like commonwealth games and other similar games. The following are the special features:

• Perfect visual display.
• Display of desired quotes.
• Digitally operated and highly flexible multilingual messages can be created in English, Hindi and other global languages.
• Highly functional in the displaying different set of messages in different time slot.

Our peak load indicators are known for their efficiency and high performance as they are accurate and easy to use.  These peak load logger indicator feature:

• Large alphanumeric LCD display with back light.
• Pace Rate display in KN/sec, sample Area digitally settable.
• Stress at peak load calculated & displayed.
• Auto incrementing sample number.
• Peak/Normal mode selectable.
• Buzzer alarm for peak detection in Peak Mode.
• Relay output for load limit detection.
• Real Time Clock setting with battery backup.
• Digital tare provided.
• Non-volatile memory for saving configuration.
• Formatted RS- 232 serial output for logging on PC
• Configuration lock at rear to prevent tampering and aesthetically designed front panel with membrane switches.

We have for our clients our clients our universal calibrator that is mP based universal calibrator. Our range of precision engineered calibrators are user friendly and accurate. The various features include:

• MP based.
• Accurate testing and calibration for thermocouples.
• Voltage/current based equipments like indicators, Controllers, recorders etc.
• Capable of measuring the output of thermocouples or simulating thermocouples types J, K, T, E, R, S & B (ANSI standard).
• Measures / Simulates mV and mA (200 mV/20 mA).
• Direct display of simulated values in °C or °F (0.1° resolution).
• Measures/simulates temperature values of PT-100 RTD.
• Automatic cold junction compensation.
• 100% Digital Linearization eliminates use of conversion tables.
• All values adjusted by means of 10-turn coarse & fine potentiometers.
• Facility to display ambient temperature in °C OR °F.
• Self check for hardware checking and wrong switch combination indicated by blinking display.
  

These 16 channel temperature scanning logger offered by us are known for their efficiency. Our data loggers can also be custom designed to meet the specific process requirements of the customers. These logger come with following features:

• 16 Channel Microprocessor Based Temperature Scanner.
• Linearised for PT100 & 3 T/Cs (J,K,R) with cold junction compensation.
• Logging of 3000 readings of all 16 channels.
• Serial RS-232 output to download all logged values to PC.
• In built Real Time Clock with battery back-up.
• Manual / Auto Scanning selectable.
• Scan rate settable from front panel up to 99sec/channel.
• User settable logging rate.
• Number of channels user selectable.
• Configuration locks at rear to lock the number of channels and clock settings.
• Non volatile memory to save settings and aesthetically designed front panel with membrane switches.