We are involved in offering Dual Analog & Digital Input Flow Indicator Model 2502A that is aesthetically designed with 4 membrane switches for friendly operation in the front panel. Provided with digital display for flow rate, our Dual Analog & Digital Input Flow Indicator Model 2502A is offered with Digit display for integrated flow values. Our Dual Analog & Digital Input Flow Indicator Model 2502A has the below mentioned features and technical specifications:

• Digit display for flow rate

• Digit display for integrated flow values

• Compatible with both analog and pulse output sensors

• Flow rate settable in per min or per hour

• K-factor programmable with 0.001 resolution

• Linear or square root function selectable

• Input frequency range from 10 pulses/min to 60,000 pulses/min

• Span programmable with floating decimal point

• Totalised flow saved in memory on power failure

• Rear panel configuration lock

• Attractive abs panel mounted cabinet

Technical specifications:

• Display: 4 digit 0.56” 7 segment Red LED display for Flow Rate, 6 digit 0.56” 7 segment Red LED display for Totaliser

• Sensor Type: a. Differential pressure transmitter (4-20mA or 0-20mA)

b. Turbine type flow sensor (Pulsed Output)

• Input: 4-20mA, 0-20mA or Pulse Input (10 per min to 60,000 per min)

• Time Base: Per Minute/ Per Hour selectable

• Calibration: For Pulse Input - a. K-Factor of Turbine sensor: Range: 0.100 to 999.999- (K Factor = Pulses/unit volume)

For Analog Input -

a. Linear/Square root function selectable

b. For 4-20mA: Zero and Span settable from 000.0 to 9999

C. For 0-20mA: Span settable from 000.0 to 9999

• Resolution: For Per Min: 0.1 volume per minute

(Flow Rate/Totaliser) For Per Hour: 1 volume per hour

• Memory: Totalised flow saved in EEPROM to prevent loss on power failure

• Totaliser Reset: By front panel touch switch

• Sensor Supply: Separate 10V supply for turbine sensor and pressure transmitter

• Configuration Lock: By rear jumper to prevent tampering with configuration

• Supply: 220V AC ± 15% @ 50/60Hz

• Dimensions: 96mm x 96mm x 135mm. Panel Cut Out: 91mm x 91mm

• Weight: 800 grams

We offer Flow Controller Model 2502-C that is offered with digit display for Flow Rate with resolution from 0.001 to 1 and digit totaliser for integrated flow values with resolution setting from 1 to 0.001. The Flow Controller Model 2502-C is appreciated by the clients for multiplier programmable along with resolution ranging from 0.001 to 0.00001. Our Flow Controller Model 2502-C has below mentioned features and specifications:

• Two individual set points for Integrated Flow with individual user settable logic

• Input frequency range from 10 pulses/min to 50,000 pulses/min

• Totalized flow saved in memory on power failure

• Rear panel configuration lock

• Aesthetically designed front panel with membrane switches and attractive ABS cabinet

Technical specifications:

• Display: 4 digit 0.56” 7 segment Red LED display for Flow Rate, 6 digit 0.56” 7 segment Red LED display for Totaliser

• Multiplier: Range: 0.001 to 999.999

• Flow Rate: 0.001 to 9999 units per min, Flow Rate = (Input pulses per min) * (Multiplier)

• Totalized Flow: 0.001 to 999999

• Set Points: Range: 1 to 999999 with resolution depending upon the selected range for cumulative flow. Hi Logic: Relay On for Integrated Flow > Set Point Lo Logic: Relay On for Integrated Flow < Set Point 5A/220V AC rating NO-P-NC contacts

• Memory: Totalized flow saved in EEPROM to prevent loss on power failure

• Totalized Reset: By front panel touch switch

• Input Signal: From turbine type flow sensors (Open collector-NPN)

• Range: 0.17Hz to 1KHz

• Sensor Supply: 10V DC provided by instrument

• Configuration Lock: By rear jumper to prevent tampering with Multiplier and resolution settings for flow rate, multiplier and totalized flow values.

• Supply: 220V AC ± 15% @ 50/60Hz

• Dimensions: 96 mm x 96 mm x 135 mm. Cut Out: 91 mm x 91 mm

• Weight : 800 grams