We offer Model 7100W Humidity/Temp Indicator (Using Dry/Wet Sensors) that is assured to have high quality standards. These are offered with direct display of Humidity and Temperature by the classical DRY & WET Electronic temperature Sensors. It also contains large 1” RED 7 Segment display for long distance visibility and an attractive rugged ABS cabinet. Following are some other features of our Model 7100W Humidity/Temp Indicator (Using Dry/Wet Sensors):

• No need of Look-Up table as the table is embedded in the micro-controller memory

• Easy to calibrate & compare with Mercury in Glass thermometer systems

• Sensors not contaminated by atmospheric gases etc. as the PT100 Sensors are sealed in steel tube

Our Model 7100W Humidity/Temp Indicator (Using Dry/Wet Sensors) has the below mentioned technical specifications:

• Display: 2 digits 7 segment LEDS 0.56” character height (for humidity) and 3 digits 7 segment LEDS 0.56” character height (for temp.)

• Resolution: 1% for relative humidity & 0.1˚C for temperature

• Range: 0 to 99% humidity and 0 to 99.9˚C temperature

• Accuracy: ± 2% for RH ± 1 least significant digit. ± 0.2˚C for temperature ± 1 least significant digit

• Sensors: 2 nos. PT100 in sealed stainless steel tubing installed on the side of the cabinet

• Power: 230V AC ± 15%

• Cabinet: Strong abs plastic cabinet. Sensor on the side, with a side platform for water bottle of large capacity

• Water wick: Made of pure cotton. To be used with preferably, distilled water & slight air breeze

• Size: 140 mm x 138 mm x 55 mm

• Weight: 700 grams

We offer Model 7210 Digital Humidity & Temperature Controllers, that have earned wide acclamation from our global clients. Offered with direct, accurate display of humidity and temperature, it works while using the classical Dry & Wet temperature sensing technique. These are also offered with 4 Control outputs for Humidifier, De-humidifier, heater and cooler. Following are the additional features of our Model 7210 Digital Humidity & Temperature Controllers:

• Sensors are sealed Platinum PT100 type in S.S. immune to atmosphere gases etc.

• No need of any look-up table as the embedded software accesses the table from the micro controller memory

• A sturdy sensor body has in-built water reservoir with facility to connect a water-drip to ensure the wick never dries up.

Our Model 7210 Digital Humidity & Temperature Controllers have the following technical specifications:

• Display: 2 Digits 0.56” RED 7 Segment LED for Humidity and 3 Digits 0.56” RED 7 Segment LED for Temperature

• Display Range : 0-99% for Relative Humidity and 0-99.9˚C for Temperature

• Resolution: 1% for Relative Humidity and 0.1˚C for Temperature

• Control Range: 0 to 99% for Humidity (over temperature range 0 to 65˚C) and 0 to 99.9˚C temperature

• Accuracy: ± 2% ± 1 Least Significant Digit for Humidity. ± 0.2˚C ± 1 Least Significant Digit for Temperature

• Settings: By front panel membrane touch switches.

• Control Output: Humidifier ON for RH < SET HUMID – 1

  •  

    • De-humidifier ON for RH > SET HUMID + 1%

    • Heater ON for Temp <SET TEMP – 0.5%

    • Cooler ON for Temp> SET TEMP+0.5˚C

• Control Relays: 4 sets of NO-P-NC of 5A/220V AC contact rating

• Power Supply: 230V AC ± 15% at 50/60Hz

• P.C. Interface: RS-232 output available on extra cost.

• Mounting Type: Panel Type

• Front Facia: 96 mm x 96 mm

• Weight: 1.2 Kg

We offer Humidity and Temperature Data Logger Using USB Flash Pen Drives that are widely appreciated by our clients. To meet the specific requirements of our clients, these drives are offered with different specifications and features. Manufactured using quality raw material, these Humidity and Temperature Data Logger are in sync with set industrial benchmarks. Following are the features of our Humidity and Temperature Data Logger Using USB Flash Pen Drives:

• Data saved directly on USB Pen drive in an MS Excel compatible file

• Separate displays for humidity and temperature

• Capacitive sensor (Dry/Wet available on request) for humidity and PT100 sensor for temperature

• Rate of logging settable by user in Min.: Sec.

• Internal Real Time Clock with battery backup for saving values along with Date and Time

• No need of any complicated or additional software for managing data

• Saving data on Pen drive allows a very large amount of storage space at very low cost

• Set Points for Temperature and Humidity

Our Humidity and Temperature Data Loggers Using USB Flash Pen Drives have the below mentioned technical specifications:

• Display: 0.56” Red LED display for Humidity and 0.56” Red LED display for Temperature

• Display Range : 0-100.0% for Relative Humidity and 0-100.0˚C for Temperature

• Resolution: 0.1% for Relative Humidity and 0.1˚C for Temperature

• Logging Rate: 1 second to 99Mins59seconds

• Data Logging: Directly create a .CSV file on the Pen Drive (compatible with Excel) giving a tabular format values of Date, Time, Humidity and Temperature

• Sensor: Capacitive for Humidity (Dry/Wet sensor also available on request) PT100 sensor for Temperature

• Set Limits: 0-100.0% for Humidity and 0-100.0˚C

• Control Logic: Heater Relay On for (Humidity> Humidity Set Limit) & (Temperature < Temperature Set Limit)

• Real Time Clock: Adjustable Calendar (Month/Date) and Time (Hrs: Min.)

• Accuracy: ± 2% ± 1 Least Significant Digit for Humidity (for capacitive sensor version) ± 0.2˚C ± 1 Least Significant Digit for Temperature

• Power Supply: 230V AC ± 15% at 50/60Hz

• Mounting Type: Panel Type

• Front Facia: 96 mm x 96 mm