We are offering Peak Load Recording Indicator CT901 that is offered with separate displays for load indication and maximum range. This Peak Load Recording Indicators CT901 is perfect for load indication corresponding to 4-20mA input digitally settable from front panel. Further, our Indicator CT901 has below mentioned features and specifications:

• Peak/Normal mode selectable

• Up to 9 peaks can be recorded and recalled

• Buzzer annunciation at Peak

• Relay output for load limit detection with limit digitally settable

• Digital tare provided to remove initial error

• Non-volatile memory for saving configuration

• Configuration lock at rear to prevent tampering with Range

• Aesthetically designed front panel with membrane switches

Specifications:

• Display: 4 Digit 0.56” 7 segment Red LED display for Load (KN), 4 Digit 0.56” 7 segment Red LED display for Set Point (KN)

• Range: 1KN to 9999

• Load: 1KN to Range

• Set Load (Limit): 1KN to 9999

• Accuracy: ±0.1% of Full Scale ± 1 digit

• Input: From 2 wire loop transmitter giving 4-20mA output 4-20mA input => 0 - Range

• Relay Logic: When Actual Load ≥ set Load Limit relay switches on

• Normal/Peak Mode: Selectable from front panel with LED indication of mode

• Peak Read: Last 9 peaks can be recalled with facility to reset memory

• Peak Detection: Peak hold is re-settable from front Reset Switch or by a parallel rear external contact

• Tare Facility (Zero): Digital Tare using front panel Tare switch up to a maximum of 50KN (for removing initial offset error)

• Memory: Non-volatile EEPROM to save settings

• Configuration Lock: On rear terminals to prevent unauthorized/accidental alteration of Range using front switches

• Supply: 220V AC ± 15% @ 50/60Hz

• Dimensions: Front Fascia: 96 mm x 192 mm Cut Out: 92 mm x 188 mm

We provide our clients with our Digital Load Indicator CT902 that is offered with large alphanumeric LCD display with backlight and 10 segment bar graph to clearly display the variation in Pace Rate. It also has an aesthetically designed front panel offered with membrane switches. Following are some of the other features and specifications of our Digital Load Indicator CT902:

• Sample Area digitally settable

• Stress at Peak load calculated & displayed

• Peak/Normal mode selectable

• Buzzer alarm for peak detection in Peak Mode

• Relay output for load limit detection

• Digital tare provided

• Non-volatile memory for saving configuration

• RS-232 serial output for logging on PC

• Configuration lock at rear to prevent tampering

Technical specifications:

• Display: 2 Line alphanumeric display with back light illumination

• Range: Load: 0.1KN to 6000KN

• Set Load (Limit): 0.1KN to 6000KN

• Set Pace Rate: 0.1KN/sec to 99.9KN/sec

• Sample Area: 0.1cm² to 999.9cm²

• Accuracy: ±0.1% of Full Scale ± 1 digit

• Relay Logic: ON when Actual Load ≥ Set Load Limit

• Normal/Peak Mode: Selectable from front panel with LED indication of current mode

• Peak Detection: Buzzer alarm re-settable from front Reset switch/ rear external contact

• Tare Facility (Zero): Digital Tare using front panel Tare switch

• Memory: Non-volatile EEPROM to save settings

• Configuration Lock: Jumper on rear terminals to prevent alteration of configuration from front

• Serial Output: RS-232 output to interface to PC

• Supply: 220V AC ± 15% @ 50/60Hz

• Dimensions: Front Fascia: 96 mm x 192 mm Cut Out: 92 mm x 188 mm