We manufacture wide range of cable trolleys that can be used for different types of trolleys. Our cable trolleys can handle flat and round cables with loop weights of 125-500 kg. Some of the features of our cable trolleys are:

• Vertically adjustable buffers
• Heavy-duty clamping bars
• Corrosion-resistant stainless steel fasteners
• Optimized energy absorption
• Cable protection characteristics
• Minimal maintenance is required

We offer flexible geared couplings that are known for their reliability and positive power transmission. Our range of flexible geared couplings are extensively used for overcoming different types of misalignments like:

• Angular: Where the Axis of the connected Shafts intersect at the center of the Coupling.
• Parallel Offset: Where the Axis of the connected Shafts are parallel but not within the same straight line.
• Combined Angular: Where the offset Axis of the connected Shafts are neither parallel nor do they Intersect.

For achieving an accurate alignment and proper balance, the hub of our couplings is machined using EN-9 steel forging. The assortment of our flexible geared couplings can be availed in two configurations like Full Geared and Half Geared Half Rigid.

Our range of starting resistors are used for both AC and DC applications. It is widely used for controlling and developing higher torque and are extensively applicable in:

• E.O.T Cranes
• Rolling Mills
• Steel Plants
• Flour Mills
• Cement Plants
• Power Plants
• Coil Mines

Our starting resistors are designed in accordance with BSS / NEMA / IEEE standards and can also be custom manufactured as per the clients specifications. The grids of our starting resistors are made from stainless steel and punched steel sheet and are suitable for maximum temperature rise of 375 degree C as per BSS standards.

Our heavy duty counter weight limit switches are widely used for E.O.T. cranes and hoists to prevent over travel of hoisting motion on power and control circuit up to 500 v.a.c., 50 cycles per sec. and 40 Amps. continuous current. We manufacture counter weight limit switch that is made of cast iron or cast aluminium.

We offer rotary limit switches that are used on control and power circuit of reversing drives so as to limit their rotation within a predetermined position. The function of our rotary limit switch is to stop the mechanism or drive at the extreme forward or reverse position. These limit switches are particularly suited for use on reversing drives such as hoist, winches, rolling mechanisms used in steel plants such as coke ovens, feeding machinery, valve drives etc. Our rotary limit switch basically consists of heavy duty worm gear drive with a ratio of 48:1 or 60:1. and this worm gear unit is built in a sturdy cast aluminium housing which is fitted on the main body of our limit switch, covered with dust tight gasket in cast aluminium enclosure. It comes with with cast aluminium cover to protect it against dust and dirt.

Our electro hydraulic thrustor is an electro hydraulic device that is used to apply pressure or actuate lever mechanism of brake arrangement. The range of our electro hydraulic thrustor is used for exerting a controlled smooth upward thrust. This can be done on any device with rated capacity. Our product comprises of a Clevis-Lug mounting which allows the thrustor to be mounted up to ten degrees. The rubber surfaces of the thrustor are immersed in oil and require less maintenance. One of the best feature of our product is that it is not affected by mechanical overloading..

Some of the features of our thrustor are:

• Robust Design
• Thrustor unit is compact
• It has long life
• It is easy to maintain

Main components used in thrustor are of high quality cast iron and steel and is operated by an integral three phase squirrel cage motor. Our thrustor has the following advantages:

• Constant Pressure
• Gentle Application and release of brake without jerks and shocks.
• Larger number of switching-in operations per hour

Our electro hydraulic thrustor brakes are suitable for 400 or 440 Volts, 3 Phase A.C. We supply these brakes for a wide range of drum sizes from 100mm to 600 mm diameter. The brake of our electro hydraulic thrustor brakes is applied by the tension of the compressed springs mounted vertically between the thrustor and brake lever. The thrustor rods are connected with the brake by means of an angle lever. As the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel is retracted. The brake lever at the thrustor begins to move when the first lever reaches the stop on the brake base member

Our thrustor forms a part of the brake, which is a self contained unit and comprises of a centrifugal pump and impeller driven by an electric motor. The impeller spines in oil and develops a pressure head which is impressed upon the piston which is directly coupled to the load lifted.

We offer shrouded bus bar conductor, which is applied in for different types of crane and other mobile equipment. Our bus bar conductor are made of galvanized steel, copper, aluminium or stainless steel. We provide protective insulation of high impact gloss finish, pvc or bayblend compound to our bus bar conductor, which depends upon the atmospheric temperature under which the system is to operate. All our systems are finger safe and are available in the range of 60 amps to 400 amps.

We can also design and supply systems for higher rating. Our bar conductors are distinctively colored for full visibility. Under no-load conditions, the collector can be easily pulled down from the conductor bar under no-load conditions for inspection and replacement of contact shoes. These contact shoes which are the only wearing part in the system. All our conductor bars, irrespective of the rating or the material of the conductor are dimensionally interchangeable.

Our well designed radio remote control has the ability to provide the simplest single function radio control to the most complicated fully proportional based remote control systems. Our wide range of transmitters, from single function pushbutton transmitters to dual axis joystick and lever transmitters with feedback display options allow us to tackle every mobile wireless radio control application. Our radio remote controls for various equipment are proven in a multitude of applications where wireless control provide safe efficient operation. From hydraulic equipment trailers to remote control of proportional track mounted equipment, concrete pump trucks and mobile truck cranes we have accomplished it all.

Our range of master controllers are used for remote operation of contractor equipment controlling heavy duty E.O.T. Cranes & Rolling Mill Drives etc. The enclosures of our master controllers are made from different materials like reinforced sheet steel and aluminium. These master controllers have covers that can be easily removed and have proper space to allow easy maintenance. These are mounted on the housing on molded bushes. Some of the features of our master controller are:

• Long Life
• Easy Maintenance
• Wide Electrical
• Clearance