CRC-EXTOCOAT EXTRA is a very versatile hose lined with synthetic rubber compound of excellent ageing property. A jacket made from 100% High Tenacity Synthetic Yarn for excellent protection against mildew and rot and over and above coated with a specially compounded elastomer to give a high degree of protection against oil and grease, certain chemical agents and heat. This elastomeric coating provides excellent abrasion resistance so that the hose can withstand a high degree of wear and tear.
Properties
100% Polyester Yarn
Surface coating with Synthetic Polymer to withstand heat
Circularly Woven Jacketed
High Abrasion Resistant
Resistant to Oil, Ageing, Ozone, Acids, Alkalies, Heat, Sea Water.
Outstanding Adhesion
Flexible
Compact
Flat Folding
Pressure Ratings
Burst Pressure 40kg/cm2 (580 PSI)
Proof Pressure 22kg/cm2 (320 PSI)
Working Pressure 20kg/cm2 (288 PSI)
Specifications
IS 636/1988 Type A
BS 6391 Type - 2
TAC approved
Bearing ISI mark
Abrasion Resistant 200 Cycle
Heat Resistance 12 sec
Mass and Coil Diameter
SIZE
MASS gm/mtr (Max)
COIL DIA for 30mtrs
38mm
275
45cm
50mm
350
45cm
63mm
425
45cm
70mm
480
45cm
Sizes Available
38mm
50mm
63mm
70mm
Lengths Available
15mtrs
18.3mtrs
22.5mtrs
30mtrs or any other lengths preferably below 30mtrs.
This popular hose is used by experienced fire fighters for its unsurpassed advantages. CRC Extocoat Hoses offer RRL Technology and ensures that the hoses are fabric reinforced rubberlined (RRL Technology), which gives and additional textile reinforcement in the hoses which is very similar to a double jacketed, i.e. hose within a hose.
RRL Hose have a distinct lap joint, which readily identifies to the USER unmistakable sign of RRL Hose. The jacket is made from 100% synthetic yarn, which imparts extremely low weight and high burst pressure. This jacket is coated with a special elastomeric compound to give the added advantages of being unaffected Oils and grease, certain Chemicals as well as Mildew and Heat. RRL Technology ensures in extreme circumstances when the outer jacket is severely damaged, the inner reinforcement can continue delivering water at operational pressures, thereby averting an emergency situation.
The RRL Technology ensures that the outer jacket can even be repaired so that the hoses, which are severely damaged, can be used by virtue of their tube lining.
Properties
100% Synthetic Yarn Construction
Circularly Woven Jacketed.
Rubberised Fabric Reinforced Rubberlined (RRL)
Elastomeric Outer Coating
High Abrasion Resistant, Ozone, Heat, Sea Water
Outstanding Adhesion
Flexible
Compact
Flat Folding.
Pressure Ratings
Burst Pressure 38kg/cm2 (550 PSI)
Proof Pressure 22kg/cm2 (320 PSI)
Working Pressure 18kg/cm2 (260 PSI)
Specifications
IS 636/1988 Type A
BS 6391 Type - 2
TAC approved
Bearing ISI mark
Mass and Coil Diameter
SIZE
MASS gm/mtr (Max)
COIL DIA for 30mtrs (Max)
38mm
275
45cm
50mm
350
45cm
63mm
425
45cm
70mm
480
45cm
Sizes Available
38mm
50mm
63mm
70mm
Lengths Available
15mtrs
18.3mtrs
22.5mtrs
30mtrs or any other lengths preferably below 30mtrs.
CRC Super Synthetic Fire Hose is made out of High Tenacity Synthetic Yarn for a high working pressure and extremely high burst pressure to ensure fool proof performance in combating skyscraper and oil fires where extremely high pressure are required.
The lining is a seamless type of synthetic rubber compound for excellent protection against ageing and tackiness. The synthetic jacket of the hose is completely inert against attacks from mildew and fungus. Moreover, being a 100% synthetic it can be dried very easily to form small and compact rolls, which can be stored and moved around easily.
Properties
100% Polyester
Rot Proof
With stands high pressure
Circularly Woven Jacketed
Resistant to abrasion, Ageing, Ozone, Sea Water.
High Kink resistant
Outstanding Adhesion
Flexible
Compact
Robust
Flat Folding
Easy cleaning
Pressure Ratings
Burst Pressure 38kg/cm2 (550 PSI)
Proof Pressure 22kg/cm2 (320 PSI)
Working Pressure 18kg/cm2 (260 PSI)
Specifications
Generally conforming to IS 636/1988 Type A
BS 6391 Type - 1
Abrasion Resistance
Mass and Coil Diameter
SIZE
MASS gm/mtr(MAX)
COIL DIA for 30mtrs(MAX)
38mm
275
45cm
50mm
350
45cm
63mm
425
45cm
70mm
480
45cm
77mm
490
45cm
Sizes Available
38mm
50mm
63mm
70mm
77mm
Lengths Available
15mtrs
18.3mtrs
22.5mtrs
30mtrs or any other lengths preferably below 30mtrs.
The Hose is made of cotton / synthetic circularly woven jacket with seamless rubber lined and unique adhesion of the fabric and rubber lining suitable for light duty operation.
Properties
Cotton Synthetic fibre
Circularly Woven Jacketed
Rot Proof
Resistant to Abrasion, Mildew, Friction, Sea water & pressure .
Flexible
Robust
Flat Folding.
Pressure Ratings
Burst Pressure 35kg/cm2 (500 PSI)
Proof Pressure 14kg/cm2 (300 PSI)
Working Pressure 14kg/cm2 (150 PSI).
Specifications
Generally conforming to IS 636/1988 Type A
MMD & TAC Approved.
Mass and Coil Diameter
SIZE
MASS gm/mtr
COIL DIA for 30mtrs
38mm
250
45cm
50mm
300
45cm
63mm
350
45cm
70mm
400
45cm
77mm
450
45cm
100mm
500
45cm
Sizes Available
38mm
50mm
63mm
70mm
77mm
100mm
Lengths Available
15mtrs
18.3mtrs
22.5mtrs
30mtrs or any other lengths preferably below 30mtrs.
CRC-RRL HOSES are the most popular, used by highly experienced fire fighters for decades due to the superb advantages. These type of hoses offer RRL Technology and ensures that the hoses are fabric reinforced rubberlined (RRL Technology) which gives an additional textile reinforcement in the hoses which is very similar to a double jacketed hose, i.e., hose within a hose. RRL Hose have a distinct lap joint, which readily identifies to the user the unmistakable sign of a RRL Hose. The jacket and the reinforcement of the hose which is predominantly cotton has excellent heat resistance property and, being a natural fibre, the hose jacket has a very good grip for the fire fighters during operation.
RRL technology ensures that in extreme circumstances when the outer jacket is severely damaged, the inner reinforcement can continue delivering water at operational pressures; thereby averting an emergency situation. The RRL technology ensures that the outer jacket can even be repaired so that the hoses, which are severely damaged, can be used by virtue of their inner reinforced tube lining. Truly, this hose gives the advantages of two hoses in one.
Properties
Cotton Synthetic Fibre Construction
Circularly Woven Jacketed
Rubberised Fabric Reinforced Rubberlined (RRL)
Treated against rot with Mystox
High Abrasion Resistant
Outstanding Adhesion
Flexible
Compact
Flat Folding
Pressure Ratings
Burst Pressure 36kg/cm2 (530 PSI)
Proof Pressure 22kg/cm2 (320 PSI)
Working Pressure 18 Kg/cm2 (260 PSI)
Specifications
IS 636/1988 Type A
BS 6391 Type - 1
TAC approved
Bearing ISI mark
Abrasion Resistance 200 Cycle
Heat Resistance 12 sec
Mass and Coil Diameter
SIZE
MASS gm/mtr (Max)
COIL DIA for 30mtrs (Max)
38mm
275
45cm
50mm
350
45cm
63mm
425
45cm
70mm
480
45cm
Sizes Available
38mm
50mm
63mm
70mm
Lengths Available
15mtrs
18.3mtrs
22.5mtrs
30mtrs or any other lengths preferably below 30mtrs.
A hose with a unique construction to ensure continuous oozing of water all around the jacket in a controlled manner whilst the build up pressure inside the hose is not lost. These hoses are used when the hoses are needed to pass through the flames and come in contact with fire. The stringent flame resistant test required under IS: 8423 ensures that the hoses when tested with a lighted blowlamp on a specimen of hose under water pressure do not fail.
These hoses are excellent in fighting fires specially in coalmines, textile mills, refineries & high rise buildings.
Properties
Cotton Synthetic Fibre
Circularly Woven Jacketed.
Treated against rot with Mystox
Abrasion Resistantv Ultra Thin Lining
Outstanding Adhesion
Light, Flexible, Compact, Flat Folding
High Kink Resistance
Pressure Ratings
IS 8423/1994
TAC approved
Bearing ISI mark
Flame Resistance
Mass and Coil Diameter
SIZE
MASS gm/mtr (Max)
COIL DIA for 30mtrs
38mm
250
45cm
50mm
300
45cm
70mm
425
45cm
63mm
350
45cm
Sizes Available
38mm
50mm
70mm
63mm
Lengths Available
15mtrs
18.3mtrs
22.5mtrs
30mtrs or any other lengths preferably below 30mtrs.
FLEXILINE' HOSES are made from an all synthetic jacket, totally encapsulated in a Synthetic Rubber blend to form a high quality, unified lining and cover, resulting in a compact unity by pillar adhesion, The cover is a specially formulated elastomer, totally resistant against grease, oils, acids, ozone, alkalies, heat and fungus.
The cover of FLEXILINE HOSE is lightweight, completely flexible and designed to facilitate a good grip. bearing ISI Mark under IS : 636 Type 'B'.
The measurably thick cover contributes to impact damage, cut damage and resistance to heat, abrasion and chemicals. This spells the true, non-maintenance quality of FLEXILINE HOSES.
Conventional hoses pick-up moisture and contamination and require regular maintenance of washing, drying and cleaning. With FLEXILINE, no drying is required, so Drying Towers can be dispensed with. The cover enables a simple 'wipe down and store' facility, due to which, the Hose is always available for use and lower stocks of hose may be held.
Features
Exceptionally resistant to scrubbing, the High Grade Synthetic Material with profiled surface texture, is easy to maintain and easy to handle. FLEXILINE Hoses are completely resistant to oil, unaffected by many chemicals, very pliable, heat resistant and rolls with a small coll diameter.
K. P. C. Flexi Tubes Engaged in exporting and supplying of hoses like corrugated hoses, corrugated flexible hoses, industrial corrugated hoses, strip wound hoses, stainless steel strip wound hoses, zinc plated steel strip wound hoses and industrial hoses.
Sakthi Engineering Works Supplier and manufacturer of suction pipes and suction hose pipes along with square nuts, flange nuts, plated u-bolts, machined bolts and threaded bolts.
Processing...
