Capacity: 3 TR to 250 TR in single unit.

Type: Atmospheric Wind Wet Cooling Tower (FRP / Wooden Atmospheric Wind Wet Cooling Tower)

Salient Features:

Location can be relatively closer to the plant building since there is no drift problem.

No efficiency loss due to re-circulation of hot air discharge from top of tower at considerable height.

No operational (running) cost.

Fire risk is comparatively less.

Minimum approach is 4.5 Deg. C.

Tower can be grouped closely, saving considerable height.

In Round Bottle Shape (Umbrella shape), FRP construction, Counter flow, Mechanical Induced Draft Cooling Tower:

• Inspection cum Maintenance Window provision in Round Bottle Shape (Umbrella shape) Cooling Tower ensure following main advantages:
• Easy visual inspection of hot water distribution system.
• Easy replacement of hot water system & PVC fills without distrubing Drift eliminators/Fan Motor assembly.

Atmospheric Wind Wet (FanLess Inducted Draft/Natural DraftInk-Jet spray ) FRP construction Cooling Tower:

• FRP Lowers are slipped fitted with specially constructed columns of cooling tower which ensures following main advantage:
  • Eliminate the problem of hole breakages at FRP Lowers during the installation & running maintenance eriod, generally happens in the conventional type of Nut-Bolt fitted FRP lower system with the columns.
  • Ensures uniform air flow across the Cooling Tower.
  • Ensures easy cleaning & replacement of louvers.

Energy Saving Units For Cooling Tower through “VELOCITY / PRESSURE RECOVERY STACK”(A Mechanical device attachment):

Power absorbed by the cooling tower fan can be reduced by this mechanical device attachment(something called as'Diffuser' or'Flow Nozzle')because portion of outflowing KINETIC Engery of air is transformed into STATIC Pressure rise. About 75% of the velocit head is recovered in a well designed "Velocity Recovery Stack"

Energy Saving through“AUTO ON-OFF FAN MOTOR SYSTEM”(An Electrical Controller attachment):

It senses system water temperature from cold water basin using digital temperature controller with accurate sensor & controls operation of electrical motor.It switches ON&OFF the motor used for Fan assembly,depending on the HIGHorLOW temperature preset according to the requirement.

Advantages:

Conversation of electrical energy and saving in operational cost by auto ON & OFF switching of the electric motor.

Lesser wear & tear resulting in longer operating life of electric motor & its Parts.

Applications:

Industries where cooling tower is not used round the clock.Cooling tower fan switch ON along with the manufacturing process only.

In the cases where the cooling tower fan is still operating ON,though there is no possibility of further reduction in cold water temperature beyond certain level.It helps in decreasing water losses.

Energy Saving through“VARIABLE FREQUENCY AC DRIVE SYSTEM”(An Electrical Controller attachment): “POWER IS DIRECTLY PROPORTIONAL TO CUBE OF SPEED”

It senses system water temperature from cold water basin using accurate sensor & Variable Frequency Drive for variable speed control of Cooling Tower fan(s).The AC variable frequency drive allows fan to run at whatever speed is required to meet cooling demand.The fan run only 40-70% of full speed,thus saving 50%or more of energy consume by fixed speed system.

SPARES:
We supply all type of quality spares for cooling tower e.g.High Flow Fan blade assemblies(MOC–Cast aluminium alloy,FRP etc.),Gear Box & its internal spares,Spray & Gravity type Nozzles of Plastic & Non–Ferrous material,Honey comb & Film type PVC Fills,Splash bar of Wood & plastic, ‘V’ bar, ‘C’ bar & Triangular bar of wood/plastic,Dynamically balanced drive shaft with end couplings with rubberbushes,Sprinkler of cast aluminium alloy & Stainless Steel,Hardware,Chemically treated wooden components,Sprinkler Pipes,Stand pipes,Tension bar,Turn Buckle,Tie Rods,Galvanized structural components,FRP components,Grill & netting of FRP/SS/Plastic coated and other miscellaneous cooling tower parts.

ACCESSORIES:

• Vibration Trip Switch
• Low Oil Level Switch
• Energy saving units
• Easy inspection cum Maintenance concepts

SERVICE/REPAIR / UP GRADATION:
So far in the world,cooling tower design is given least attention because of its simplicity.Surveys indicate that in 65%cases cooling tower failed to meet the design specifications and became the cause for decreased plant efficiency.In order to achieve desired performance,it is to be designed with adequate fill volume,proper water distribution system,correct fan diameter,sufficient motor capacity and minimum pumping head for given quantity of water circulation.It is advisable to higher Services from the experts at reasonable charges to study the requirements,operations and give their recommendation rather than going for free,routine check-ups offered by manufacturers/suppliers of the cooling towers as a part of their marketing strategies to sell their products. Main objective of thermal up-gradation is to generate larger volume of cold water so as to conserve energy during operation of associated equipments.The main elements of any cooling towers are:#Air handling system;#Water distribution system;#Heat transfer surfaces.

Air Ventilator (Roof Extractor/turbine Ventilator/eco Ventilator/ Turbo Ventilator) Utilises wind energy to induce Air flow by centrifugal action. Centrifugal force created by rotating vanes in turn creates low pressure zone which draws fresh air from outside. Thus replacing polluted air/hot air continuously.

Material of construction: Available in Aluminium and Stainless Steel.Powder and anodizing can be done on request.

Application:

Industrial sheds.

Factories.

Hospitals.

Restaurants.

Hotels.

Ware houses.

Paint shops.

Domestic uses.

You are requested to work out at your end against following detail include detail in your inquiry:

• Shed/Premises/Hall volume (LENGTH*WIDTH*HEIGHT)
• Application under that Shed/Premises/Hall
• Details of doors/Windows/Ventilation openings i.e.
  • Nos. of windows on each wall showing the North direction;
  • Nos. of Widows on each wall showing the North direction;
  • Nos. of Ventilation openings,if any,showing the North Direction. Also,Width & height of doors,windows & ventilation openings(height of ventilation opening from the Ground Level to be provided separately).
• Wind velocity at height of installation of Turbo Ventilator.
• Temperature reading inside the Shed/Premises/Hall at peak load of operating hours & outside the Shed/Premises/Hall.

Kindly note that you are requested to provide as maximum as possible workout detail from the above points.