We are manufacturing slurry pumps and process pumps that are specially made to keep the customer's plant and processing lines strong. One of the most difficult task of our pumps is to efficiently handle the abrasive solids and slurry in the mining and minerals processing environment. We specialize in designing and developing pumps that are suitable for tough and corrosive slurry. Our customers can chose from over 100 models of pumps.

Product Features:

• Capability: As per the buyer's specification
• Delivery time: 60 days
• Minimum order: 2 PUMPS

We are manufacturing medium duty slurry pumps that are designed for handling highly abrasive slurry with:

• Capacity: 5-550 m³/hr
• Head: 6 to 55 mts.
• Discharge Size: 25 mm to 200 mm.

Product Features:

• Special features: Heavy duty high abrasive resistant pumps
• Brand name: Creative Pumps
• Capability: As per the buyer's specification
• Delivery time: 60 days
• Minimum order: 5 PUMPS

We are manufacturing heavy duty slurry pumps that are specially designed for handling highly abrasive slurry with slide back facility. The slide back design makes the maintenance easy by the pumps base sliding on the rails for replacement of impeller gland parts without disconnection the suction and discharge connections. The pumps are designed with replaceable liners and have low speed with high efficiency. These bearing are designed for more than 120000 operating hours.

• Capacity: 10 – 1350 m³/ hr
• Head: 5 to 65 mts.
• Size: 50 mm to 250 mm

Product Features:

• Special Features: Special revers pull out design, back pull out design heavy duty pump with piggy mounting pumps
• Capability: As per the buyer's specification
• Minimum order: 2 PUMPS

The range of our Creative Vertical Slurry Pumps is widely used in spillage applications in benefaction plants. Our pumps do not have a gland box, submerged shaft seals or bearing. This removes the requirement of sealing water and guarantees minimum maintenance. The bearings are fitted above the sump level with heaving double protection against penetration of slurry. Wear parts are available with Ni-hard, Hi-chrome, natural rubber, CD4MCU, SS316, CF8M etc. Creative Sump Pumps are available in various types.

• Type-I: Standard pump with closed impeller and extended suction (inlet).
• Type-II: Pump with spray hole casing and semi open impeller that is spray holed in the casing. It helps in pumping slurry back to the sump to agitate the settled solids.
• Type-III: Pump with agitator.

Product Features:

• Capability: As per the buyer's specification
• Minimum order: 2 PUMPS

We present creative hydro cyclones that cater to the mineral industry and have a higher wear life. These are highly reliable and can be availed at low costs. Some of the highlighting features of our pumps are enlisted below:

• Superior hydracycloidal designs
• Wear and corrosion resistant
• Unique laminar spiral inlet geometry designs
• Maximum efficiency and capacity
• Increases circuit capacity
• Maximises air core diameter
• Increases the feed chamber wear life by 3-4 times

Our production unit is equipped to undertake fabrication of heavy engineering items. We are engaged in fabricating heavy engineering products like:

• Gurth Gear
• Pinion Gear Boxes

We also undertake heavy fabrication like:

• Silos
• Trunnion Brags
• Mill Heads

We have a qualified team of fabrication engineers who are committed to manufacture the best products in the industry. The facilities available at our fabrication unit meet all the heavy engineering items fabrication needs of our customers.

We are engaged in manufacturing forth pumps with integral conical tank for increasing the palpably of frothy liquids. Some of the highlighting features of our products include the following:

• Efficient pumping of frothy liquids
• Higher capacity
• Long and trouble free operations
• No special foundation required
• No alignment required

We are manufacturing vertical pumps with an integral tank that is mounted on the floor and does not require any special foundation or alignment. Some of the special technical features of our products are:

• Capacity: 5 to 400 m³/hr
• Head: 2 to 30 mts.
• Discharge Size: 25 TO 200 MM

A few of our other features are:

• Layout Flexibility: The pump, pump-sump and motor are integrated to one self-contained unit. It is simple to install and connect. No alignment or special foundations is required.
• Wear Parts: The CVP-pumps have easily replaceable wear parts. Standard wear parts are available in soft wear resistant rubber or Ni-hard alloy. Synthetic rubber qualities or sintered silicon carbide by request. The design of CREATIVE pump enables us to offer a combination of materials for optimum performance.
• Cantilever: No shaft seal means no sealing water. No tightening of glands and non replacement of worn shaft sleeves.
• Bearing Assembly: Cartridge type with grease lubricated roller bearings, rated for more than 60,000 operating hours. All bearing are above the sump.
• Smooth Operation: The open pump design with a vertical inlet prevents air-blocking. If the pump temporarily should run dry, air deaerator upwards through the inlet.