Creative Robotics Private Limited

Baldor’s BMC-series of controls now provides designers the advantages and benefits of brushless technology for adjustable speed applications– these include quieter operation, less maintenance, tight speed regulation and a more efficient design. Adjustable speed applications such as door openers, mixers, conveyors, pumps, and many others can now make efficient use of brushless technology

The LD series servo control is an open chassis configuration similar to the UM, however operates direct from 115 Vac. The LD contains one or two servo control cards mounted onto a chassis, provide 15 amps continuous, 30 amps peak per axis. Protection for over/under voltage, over temperature, short circuit, etc.

Baldor's TSD is a totally enclosed PWM drive for control of one or two DC servo motors. Panel mount enclosure, completely stand-alone unit plugs into 115 or 220 Vac. Accepts industry standard +/- 10 Vdc input command for operation in either velocity or current mode. Provides up to 5 amps continuous, 10 amps peak per axis. Fully protected unit. Easily interfaces to existing motion controllers.

Adding redundancy in the system is an effective step to reduce risk. To respond to customer's needs regarding system reliability, OMRON applied its proven duplex PLC technology to the CS Series to provide a highly reliable PLC System. These PLC Systems have redundant vital components (such as CPUs, power supplies, networks, and expansion cables), while retaining the CS1-series functions and capabilities that are suitable for a wide variety of applications

EuroFlex is a compact EuroCard format servo drive, available in single phase from 24-80VDC or 18-56VAC, 5A continuous, 15A peak. EuroFlex provides high performance servo control for both rotary and linear brushless motors with its powerful DSP (Digital Signal Processor) core. The motor feedback is software programmable, accepting commutating encoder or Halls only.

MicroFlex e100 integrates the advanced capabilities of real-time ETHERNET Powerlink to provide superior performance, network integration and costs savings. MicroFlex e100 is compatible with the NextMove e100 motion controller to provide a fully integrated solution using real-time Ethernet. MicroFlex e100 is a compact servo drive, available in single phase from 110-230VAC or 3 phase 230VAC operation in current ratings of 3, 6 and 9A. It provides high performance servo control for both rotary and linear brushless motors with its powerful DSP (Digital Signal Processor) core.

Baldor's award winning MintDrive II integrates a powerful motion controller and servo drive into an intelligent compact package. The MintDrive II provides motion control for single-axis applications for rotary or linear brushless servo motors. Programmable in Baldor's easy to use multi-tasking language MintMT, which coordinates motion, HMI and PLC tasks. Supports positional moves, CAMS, flying shears, software gearboxes, and more. Engineered for much higher speed. Windows front end provides full auto-tuning to make velocity and position loop set-up simple.

Multi-functionality Condensed into an All-in-one Package. Expanded Range of Applications with Built-in Pulse Outputs for Axes, Analog I/O, and Serial Communications, and with a USB Port as a Standard Feature

With accelerating globalization and the diversification of market needs, added value is being sought in equipment as never before. OMRON’s latest solution is the release of a new package-type terminal-block PLC that combines full basic functionality with advanced expandability.

A full complement of built-in functions enables increased applicability. Reducing the design time required for expanded and more complex programming helps in giving added value to equipment.

Complete with a standard-feature USB port, CP1L PLCs include CPU Units for applications with as few as 10 points. Whether you need simple sequence control or pulse I/O and a serial port, the CP1L PLCs give you an economical choice from among 10-, 14-, 20-, 30-, 40- and 60-point CPU Units.

Provides Higher Value-added Machine Control in a Flexible System Configuration2
Its compactness and rack-less modular design allows easy system expansion and automation to suit user control requirement. With task-dedicated inner-boards, specialized I/O and high speed communication module, CQM1H promised a powerful and user-friendly solution.

The BSM C-series has as standard, a “higher” inertia – thus providing an excellent match for equipment requiring “higher” inertial matching for the machine. This series provides continuous stall capability ranging from 10 Lb-In (1.2 N-m) to 256 Lb-In (30 N-m). Peak torques are typically three time continuous. Baldor's BSM C-series provides 50% more torque in a smaller size (2 inches/50 mm) shorter) compared to previous Baldor motors. The C-Series provides an economical package best used in applications with higher load inertias.

Easy-to-Use Compact Simplified Inverter for the Customer's Environment and Application Demands.

• Provides a wide ranging capacity from 0.2 to 3.7 kW in spite of the compact size.
• The main circuit adopts upper/lower wiring as with a conductor.
• Side-by-side mounting contributes to space saving.
• The PID function is featured for the easier control of the fan and pump.
• The three-phase models incorporate a zero-phase reactor (radio noise filter) as a standard specification.
• ModBus-RTU communication allows you to perform network operation at low cost.

MotiFlex e100 is the latest generation of 3 phase drive from Baldor. System architecture is simplified by a single, highly flexible drive and motion control platform. For example, control of linear, rotary, servo and vectors is simply a software configuration.

The NextMove e100 builds on the proven NextMove controller family of products and now integrates management of real-time Ethernet networks using the industry standard protocol ETHERNET Powerlink. Drives, I/O devices, sensors, absolute encoders can be added to the Powerlink network and controlled from the Mint programming language. This greatly simplifies system design and installation, and simultaneously expands the capabilities of the NextMove e100 as a machine control platform.

Nextmove esb-2 a compact panel mount motion controller for the control of up to 8 axes - 4 servo, 4 open loop stepper. Using the latest generation 32-bit digital signal processor (dsp) and field programmable gate array (fpga), nextmove esb-2, coupled with mintmt, offers a high speed and flexible motion controller.

Nextmove pci-2 is the latest generation pci based motion controller from baldor. Based around the popular nextmove pci controller, nextmove pci-2 offers a pin compatible motion controller with over twice the performance. Nextmove pci-2 is a compact (7") pci based controller for the control of up to 12 axes of motion. A single card can control up to 4 axes of servo and 4 axes of stepper. Expansion cards are available to take this to 12 axes of servo and 12 axes of stepper.

NextMove ES is a cost effective rack mounted motion controller for the control of up to 6 axes (2 servo and 4 stepper). Available with a USB interface, this provides a high speed interface to the PC. The onboard CAN port can be used to interface to I/O and HMI devices, as well as peer-to-peer networking capabilities with other Mint controllers. NextMove ES is programmable in multi-tasking MintMT, embedded ‘C’ or through the supplied ActiveX components.

The UM control is an open chassis configuration designed to operate a wide range of Baldor's DC servo motors. The UM series typically contains from one to six servo control cards mounted onto a multi-axes chassis containing a power supply. Accepts industry standard +/- 10 Vdc input command for operation in either velocity or current mode. Models provide up to 6/15 amps continuous, with 15/30 amps peak. Easily interfaces to motion controllers. Protection for over/under voltage, over temperature, short circuit, etc.

Baldor's MicroFlex is a compact brushless servo control capable of powering either rotary or linear motors. Input command may be the industry standard +/- 10 Vdc (velocity or torque), or pulse and direction (solutions for stepper upgrade packages). Feedback is software programmable, accepting encoder, SSI (Synchronous Serial Interface) or Halls sensors. Available in single phase from 110-230VAC or 3 phase 230VAC operation in current ratings of 3, 6 and 9 amps. Intuitive front end Windows software provides full auto-tuning capabilities.

Baldor's FlexDrive II is a fully featured 1 axis brushless servo which provides high performance control of rotary and linear brushless servo motors. FlexDrive II accepts industry standard +/- 10 Vdc, or pulse and direction, or electronic hand wheel command inputs. Baldor's fully featured controls include a variety of options, such as bus options (CAN, DeviceNet, and Profibus-DP), feedback (resolver, incremental and absolute multi-turn encoders), I/O (programmable interface to external PLC) and logic supply options (internal or externally supplied +24 V). Full auto-tuning makes set up and tuning simple . Models available with 115/230/400/460 Vac and currents up to 15/15/27/27 amps.

Repeatable moves become a breeze to accomplish with this easy-to-set-up package. Baldor's Flex+DriveII is similar to the FlexDrive series, however incorporating intelligence for indexing applications. For simple point-to-point indexing moves, a pre-set table is configured. The 16 pre-set moves can be expanded to 256. Complex indexing is handled with single-tasking version of Baldor's MintMT programming language. Windows front end for easy to use set-up and full auto-tuning . The Flex+Drive II provides servo control for rotary and linear brushless servo motors.

The BSM R-series from Baldor allow designers to make use of the benefits of brushless technology in smaller compact packages – less maintenance, quieter operation, faster acceleration. This series provides continuous stall torques ranging from 1.4 lb-in (0.16 N-m) to 11.2 lb-in (1.2 N-m). Peak torques are three times continuous stall.

Baldor's dsm series is an integrated high torque stepper motor and microstepping driver. The dsm is available in three frame sizes nema 17, 23, and 34, providing open loop operation with torques up to 1061 oz-in (749n-cm). The 1. 8° stepper motor is combined with a microstepping drive, with up to 14 resolution setting from 400 steps to 51,200 steps per revolution. A simple windows™ front end is used to set up resolution and other parameters.

We are designing, Manufacturing & Commissioning of following control panels of World class quality

PLC Control Panel
PLC Panel for DG Synchronizations/LMS/AM
Power Panels
VFD Panels
Control Desks

Baldor's low backlash GBSM-series of gearheads mount easily and directly onto the BSM C-series and N-series servo motors. These gearheads are designed for servo applications requiring precision, durability, and long trouble-free operation. The GBSM-series are planetary gearheads, which provide very high power transmission capability, torque multiplication, speed reduction and inertial matching. These are high efficiency gearheads. The standard GBSM gearheads are available in five different case sizes, which fit directly onto the five sizes of Baldor’s BSM servo motors. Mounting takes less than 2 minutes.

Baldor's DC Servo motors were designed rugged to meet demanding requirements of industrial motion control. Available in diameters from 2.2 to 4 inches (55.8 to 101.6 mm) to provide continuous stall torques up to 56 Lb-In (6.3 N-m). They are designed to handle a continuous high temperature of 155°C for reliability and dependability. A wide variety of options are available for customization to meet your application needs - tachometers, encoders, brakes, mountings, shafts, windings, speeds, connectors, environmental. Standards available from stock.

Baldor’s BSM25 and BSM33 brushless DC motors with Hall sensors provide machine designers the benefits of brushless technology – quieter operation, smaller size, maintenance-free, longer life, and faster time to speed. They represent the best long-term investment.

The advanced CPM2A series micro controller delivers you the most feature-packed micro solution in control industry. With wide variance of built-in I/O points and supply voltage, this small packaged controller offers its rich instruction set, convenient built-in multiple communication interfaces to programming peripherals, SCADA host or HMI device.

Its high speed I/O processing enable easy implementation of motion control application. Distributed and autonomous control system could be realized through the hi-speed CompoBus/S interface to the CPM2A