Specifications: Range 0.0 to 14.0 pH Resolution 0.1 pH Accuracy (@20degreeC/68degreeF) +- 0.1 pH Calibration manual,1 or 2 point Electrode Battery Type/ Life (4) 1.5 V (included)/approx, 700 hours of continuous use Environment 0 to 50degreeC(32 to 122degreeF); RH max 95% Dimensions 175x 41x23 mm Weight 95 g
Specifications: pH 0-14 Temperature Range degree C 0-130 Diaphragm Ceramic Reference System Ag/AgCl Reference electrolyte Pressurized Gel Cable and connections MS7/fixed Cable Model PG-PHHT-18 Autoclavable pH Sensor
Steam Sterilizable Gel filled-helps to maintain zero potential for longer time Multi ref. Junction - fast response due to increased porosity Built in temperature - optional Compatible with any pH transmitter / Meter
Junction Double, PTFE Electrolyte Polymer Temperature Range -5 to 80degreeC Maximum Pressure 6 bar Connection BNC Cable Length 5 m Features : 1/2" NPT external thread for in-line installation pH electrode with exclusive PTFE non-clogging membrane Double-junction technology PVDF body
Specifications: Max. System Pressure : 2 10 Kg / cm (150 psi) Temperature Range : 80degreeC to 1200degreeC. Electrical : Hermetically sealed reed switch, 80AT type 500mm long two core wire. Contact Rating : 'NO' type contact rated for 1 amp 230 Vac (resistive). [Please take care of surge currents to avoid damage of Reed switch element. In such case lease apply R.C. Network (Resistor & Capacitor)]. Precautions :
Do not use excessive forces while fixing nozzles/ couplings. Use thread sealing for leak-tight joints. Do not hold switch in vice or wrench. Do not exceed electrical rating of the read switch. Use auxiliary relay or contactor for higher current rating and extra number of contacts. Do not exceed normal pressure rating of the switch for standard models. Consult manufacturer for higher system pressure.
Specifications: Dial Size : 63mm, 100mm, 150mm & 250mm Accuracy : +/- 1% of full scale. Case & Bezel (IP-65) : SS 304 Snap Action Bayonet type & for 250mm Die cast aluminum. Movement : SS 304 Pressure Element : SS 316( = 70 bar 'C' Type /> 70 bar Coil Type ). Socket : SS 304 / SS316 Dial : Aluminum white painted with 270 degree black scale marking. Pointer : Al. / Brass,Zero adjustment / Micro Zero Adjustment pointer. Window : Toughened / Safety glass. Blow Out Protection : 63mm on Top & 100 & 150mm on back side at 0.6 Kg/cm2. Over Load Protection : 125% of f.s.d. for = 150 Kg/cm2 / 115% of f.s.d. for > 150 Kg/cm2. Joints : Argon arc welded. Mounting : Stem (Bottom), Surface, Panel Mounting, Flush Panel ( Bracket Type). Connection : 1/4" / 3/8" / 1/2" BSP / NPT. Scale Range : Vacuum, Compound & Pressure up to 1400 kg/cm2.
S S 316 Case & Bezel available on request. Ammonia (NH3), Oxygen(O2), Freon Scale available on request. Eco Model in M.S. & SS Case available on reques
Specifications: Medium Conductivity >5 uS/cm Meter Sizes 1/2'",1",2",3",4" ,6" NB Pipe flanges For Higher size consult Factory Flow Tube Part S Series : SS 316 P Series : Poly-Propylene Electrodes SS 316L or optionally Hastalloy 'C' Materials 1) S series Flow Tube : SS 316 [ non magnetic] Electrodes : SS 316 / Hastalloy C / Platinum Lining : PTFE or Neoprene options Flanges : SS 304/SS316/SS 316L Sensor Housing : CS, Epoxy painted/ SS 304. 2)P series Flow Tube : Polypropylene Electrode : SS 316 / Hastalloy C Material of Housing Aluminum / Powder coated Flow Velocity 0.1 to 10 m/s in two ranges Pressure Rating S series : standard Flanges - ASA150 options on request 10 bar Standard, higher on request P series : 10 Bar at 55degreeC Operating Temperature Medium S series : 0 to 150 Deg.C for PTFE lining 0 to 60 DegC for Neoprene lining P series : 0 to 55 degreeC Operating Temperature Ambient 0 to 55 Deg. C Temperature Drift +/- 0.016% / Deg.C Power Supply 100 VAC TO 250 VAC Power Consumption 15VA max Outputs 4 to 20 mA DC isolated in 500 ohms max Load : RS485 with Modbus RTU protocol (OPTIONAL) Accuracy +/- 0.5% of Flow +/- 3 mm /Sec from 0.5m/sec to 10 m/sec Repeatability +/- 0.2% of reading +/-3mm/sec Key Board and Display 3 Keys with 2 lineX16 ch LCD- A/N display, back lit Flow parameter : Programmable - Volume Units : ltrs, M3, ML, CF, BG - Time Units : sec, min, hrs Configurable Parameters F.S. for 4 to 20 mA range, %Low flow cut off, Communication Parameters Calibration Constant Damping (Filter) Calibration Factory Calibrated on certified flow rig Cable Entries 4 nos. for Remote Converter, up to 3 nos. for integrally mounted Converter Ingress protection IP 65 Flame proof Version Please contact factory
High Accuracy Flow Optional Digital Transmission Isolated 4 to 20 mA current output IP 65 Field / Wall mounted Enclosure 2 Line Alpha numeric back lit display Flange / sandwich type mounting Easy maintenance as no moving part. Operates over wide range of Pressure and Temperature.
Application: Measuring the total volume of cold portable water passing through the pipeline.
Multi-jet, dry-dial, easy for maintenance; Magnetic drive reliable characteristic, long working life; Vacuum sealed register ensures the dial keep free from fog and frost, Keep the reading clear in a long term service; Technical data conform to international standard ISO4064 Class B
Working Condition: Water temperature: 0.1-40 oC for cold water meter 0.1-90oC for hot water meter Water pressure : ≤1.0Mpa or 1.6Mpa
Maximum permissible error: » in the lower zone from qmin inclusive up to but excluding qt is ±5%. » in the upper zone from qt inclusive up to and including qs is ±2%; Hot water meter ±3%
Specifications: Input mV from pH Electrode RTD Pt-100 for Temperature Compensation Range 0-14 pH Display 8 x 1 LCD display Ret. Output 4-20 mA DC Temp. Comp. Auto/Manual (Programmable) Power Supply 220-240 VAC, 50-60 Hz Accuracy +- 0.01 pH Enclosure class IP-66, Flame proof, IIA, IIB Enclosure material Die Cast Aluminium LM-6 Enclosure Size 122mm (H) x 210mm (W) x 200mm (D) Mounting 2" Pipe Mounting Cable Entry 3/4" ET, Double Compression Termination Through Pin Type Lugs Operating Temp 0 to 55degreeC Operating Humidity 5 to 95% RH Non-Condensing Features :
Advanced embedded micro controller based design Easy front key calibration Multi parameter display by a key press Error code for self diagnosis Pass code provision for Authorized settings 8 x 1 LCD display
Specifications: Dial Size : 63mm, 100mm, 150mm. Accuracy : +/- 1% of full scale. Case & Bezel (IP-65) : SS 304 Snap Action Bayonet type / Crimp type . Movement: SS 304 Pressure Element : SS 316 ( = 70 bar 'C' Type /> 70 bar Coil Type ). Socket : SS 316. Dial : Aluminum white painted with 270 degree black scale marking. Pointer : Al. / Brass, Zero adjustment / Micro Zero Adjustment pointer. Window : Acrylic / Toughened / Safety glass. Blow Out Protection : On Top / On back side at 0.6 Kg/cm2. Over Load Protection : 1 25% of f.s.d. for = 150 Kg/cm2 / 115% of f.s.d. for > 150 Kg/cm2. Joints : Argon arc welded. Mounting : Stem (Bottom), Surface, Panel Mounting, Surface with capillary extension. Scale Range : Vacuum, Compound & Pressure up to 420 kg/cm2. Sealed Unit : Upper Chamber Material : SS 304 Diaphragm Material : SS 316L / MONEL / HASTALLOY -C / TANTALUM or any other material.
Different type of seals & connection available like Different threaded type, Open Flange Type, Flush welded diaphragm type, Sandwitch flange (cell) type, Extended welded diaphragm type, Capillary extension type. SMS & TC Connection for food, Biochemical & pharmaceutical industries. Homogenizer flange ( Round or Square) Type. Special Connection for Pulp & Paper Industries. Eco Model available on request
Specifications: Measurement Principal : Ampherometric- Polarographic Output Signal in Air : Approx. 67 nA @25degreeC Sterlization : Maximum 135 degreeC Maximum Pressure : 4 bar (atm), 56 psig Body : 316L Stainless Steel Connection : Standard 25mm Side
Extra Rugged Design for Harsh Environment FDA Positive Listed Material of Construction Steam Sterlizable & Autoclavable Replaceable Anode/Cathode Assembly Virtually Compatible with any DO meter Suitable for Hygienic Application Industry Standard 4-Pin Connector Easy to Replace Membrane Body Most Economical, Cost Effective Design
Specifications: Temperature Range : 0-80degreeC Maximum Pressure : 58 psig, 4 bar (atm) Response Time : 98 % in 60 seconds at 25degreeC Sensor Body s : CPVC O-ring Seals : Silicone rubber F low Dependence : Readings in stirred and unstirred solutions differ by approximately 3-5 percent Temperature Compensation : Automatic with built-in thermistor, 22K Ohms at 25degreeC Wetted Materials : CPVC, 316L stainless steel, Silicone Standard Cable Length : 10 ft - Optional lengths available
Specifications: Probe Current @ 28degreeC 760 mm pressure Nitrogen 0.25 microamperes maximum,0-5mV ( depending upon meter used) Air ~ 10 microamperes, 30-50 mV (depending upon meter used) Membrane temperature coefficient ~ 4% / degreeC Maximum Sterilization Temp. 130degreeC Standard Lengths 120 mm,170mm,225mm,325mm
Specifications: Dial Size : 63mm, 100mm, 150mm & 250mm Accuracy +/- 1% of full scale. Case & Bezel (IP-65) SS 304,Crimp Type / Snap Action Bayonet type & for 250mm Die cast aluminum. Movement SS 304 / Brass (63 mm) Pressure Element SS 316( = 70 bar 'C'Type / > 70 bar Coil Type ). Socket SS 304 / SS 316 / BRASS (63mm) Dial Aluminum white painted with 270 degree black scale marking. Pointer Al. / Brass with black finish. Window Acrylic / Safety glass. Blow Out Protection On top at 0.6 Kg/cm2. Over Load Protection 125% of f.s.d. for = 150 Kg/cm2 /115% of f.s.d. for > 150 Kg/cm2. Joints Argon arc welded / Brass silver brazed. Mounting Stem (Bottom), Surface, Panel Mounting, Flush Panel ( Bracket Type). Connection 1/4" / 3/8" / 1/2" BSP / NPT. Scale Range Vacuum, Compound & Pressure up to 1400 kg/cm2.
S S 316 Case & Bezel available on request. Ammonia (NH3), Oxygen(o2), Freon Scale available on request. Eco Model in M.S. Case & S S Case available on request
Specifications: Max. System Pressure 20 bar (Standard Version) high pressure version can be provided on demand Temperature Range 10-800degreeC Pressure Drop <80m bar at Qmax. (For Qmax. refer flow range table) Accessories Reffer ordering information Material of Costruction SS 304 Enclosure Die Cast Aluminum Weather Proof to lp67 Set Point Tolerance +- 10% Repeatability Tolerance +- 5% Contact Rating 5A 230VAC SPDT Micrswitch Advantages :
Low pressure drop Instant responce High repeatability Max. pressure rating 250 bar as an option Switching function dependent on flow rate alone, not on temperature or pressure Contact close when liquid is flowing Contact open if flow is interrupted Specific set point adjustment, including special set point OEM design, can be modified as per customer requirement
Specifications: Range : pH 0.00 to 14.00 pH mV +- 1999 mV Temperature 0 to 100degreeC Resolution : pH 0.01pH mV 1mV Temperature 0.1degreeC Accuracy(@20degreeC) : pH +- 0.01pH mV +- 1mV Temperature +- 0.4degreeC (excluding probe error) pH Calibration : manual 1 or 2 point through trimmers (offset +- 1pH; slope: 85 to 100%) Temperature Compensation : automatic, 0 to 70degreeC (32 to 158degreeF) pH Eletrode (included) : pH eletrode, double junction, get filled, with internal temperature sensor, DIN connector and 1m cable Input Impledance : 10 Ohm Battery Type / Life : (1)9V (included)/ approx 100 hours of conditions use Environment : 0 to 50degreeC (32 to 122degreeF); RH max 95% Dimensions / Weight : 164x76x45 mm/ 180 kg
Specifications: Dial Size : 100mm & 150mm. Accuracy : +/- 1% of full scale. Case & Bezel (IP-65) : SS 304 Snap Action Bayonet type. Movement : Brass / SS 304. Pressure Element : SS 316 Diaphragm / Compact capsule. Dial : Aluminum white painted with 270 degree black scale marking. Pointer : Al. / Brass, Zero adjustment / Micro Zero Adjustment pointer. Window : Toughened / Safety glass. Blow Out Protection : On top at 0.6 Kg/cm2. Over Load Protection : 125% of f.s.d. for = 150 Kg/cm2 / 115% of f.s.d. for > 150 Kg/cm2. Mounting : Direct Bottom entry. Scale Range : For Schaffer Diaphragm: 760mmHg Vacuum, Compound, 0.6 to 21 Kg/cm2. For Low Pressure Diaphragm : 250mmWc to 6000 mmWc. For Compact Capsule : 250mmWc to 6000mmWc.
Economic M.S. Model available on request. Flanged connection available on request.
Manufacturer and supplier of counting machines, electronic counting machines, loose note counting machines, automatic currency loose note counting machines, fake note detections, door frame metal detectors and hand held metal detectors.
Supplying digital measuring instruments like digital meters, electrical digital meters, neptune digital meters, digital ammeters, digital voltmeters, 3 phase digital meters, digital frequency meters and digital requency meters.
Supplier & manufacturer of temperature measuring instruments, mercury in steel thermometers, bi metallic thermometers, temperature indicators, capsule pressure gauges, pressure test gauges, differential pressure gauges, process control instruments.