Industrial Lubricant Coatings

IT-2503 is zinc-rich coating that performs like a hot dip galvanized coating to prevent rust and corrosion on all types of metals for up to two years. It works electro-chemically on all ferrous metals, providing rust and corrosion protection indoors and outdoors. This can also be used as a primer over rusted metal to repair hot dip galvanizing. Specially formulated, it provides a tough, flexible coating that will not crack or peel even in extreme heat or cold.

 The product formulated with 95% purity zinc works like a hot-dip on ferrous metals indoors and outdoors. It withstands water temperature up to 100°C and continuous dry heat up to 400°C. Commonly used as a flash rust preventive on welded areas, the coating which is flexible coating will not yellow, chalk, crack or peel & offers a long term protection.

Typical applications include it use for marine applications, on cars, buses, trailers, trucks, air conditioning systems and fans, fencing, piping, sumps, water tanks, gutters, metal roofs and buildings etc. It is used for structural steel bridges, buildings, off-shore rigs, steel windows, sheet metal and welding joints

IT-2585 is dry lubricating bonded coating designed for lubrication of the sliding surfaces operating in dirty/dusty atmospheres.  As a lubricant for highly stressed joints with slow sliding speeds and/or oscillating movements.  It is used successfully for the lubrication of coarse chains and guide ways operating under high loads and exposed to high temperatures. Also used as a lubricant for highly stressed joints with slow sliding speeds and/or oscillating movements.

IT-2504 is heat cured solid lubricant bonded coating containing molybdenum disulfide, PTFE, and corrosion inhibiting additives.

It provides excellent combination of anti-wear properties and chemical/corrosion protection. The lubricant coating is designed for coating on parts exposed to very high loads and parts requiring permanent lubrication. The coating protects against fretting and galling such as splines, universal joints or keyed bearings etc. Also used for coating on threaded connections for easy dismantling.

IT-2504 is ready to use and can be applied by spray or dipping.

IT-2586 is designed to provide a high temperature dry lubricant coating esp. as a lubricant for heavily loaded chains in temperature ranges in which oil or grease lubrication is not possible. Some applications are for lubrication of high temperature chain drives in annealing, baking ovens for aluminum tube manufacturing, wire ropes & conveyor chain drives exposed to high temperatures, painting systems etc.

The product can be sprayed onto hot surfaces. Dries at room temperature. Can be mixed with water in ratio of up to 1:5.