Daaksh Tools

We are offering you our Clamp Type Knurling Holder and it helps to increases life of machine and thus it does not put load on machine. We manufacturer offer clients a wide range of clamp type knurling holders that usually find usage in lathe machines. The precision engineering standards that undergo in manufacturing these knurls provide in them optimum functionality and service life standards.  We manufacturer designed these knurling holders to fit any knurling or thread rolling holders and attachments. Further these are furnished with lapped tooth finish that helps to impart it smoother, cleaner tooth surfaces on parts and also extend the tool life.

Clamp Type Knurling Tool Holder is another type of clamping holders which are used to knurl the job. We manufacturer fabricate it with best quality raw material. They are adjustable holder for more comfort on more size with one holder only. They are easy to operate and are durable. We as a reckoned manufacturer offer you in customized range as per client’s requirements in all over India.

We are one of the leading manufacturers and suppliers of Knurling Tool Holders that are fabricated using quality raw material. Knurling Tool Holders are designed in compliance with international quality standards. These holders are appropriately machined and grounded to enhance easier usage. These holders can be supplied with quality and high speed knurls as per the requirement of the client. This knurling tool will add professional look to your parts. Knurls are pressed or embossed into the surface of a part rather than cut. Material is moved from one position to another under pressure. Doing so can involve quite a bit of force, which is hard to achieve from a single direction on a small machine. For this reason, Sherline developed a tool holder that squeezes two knurling wheels against the part from opposite sides, relieving stress on the machine itself. The holder consists of a right and left side that evenly tighten down on your part, creating a knurled pattern. We as a leading manufacturer of this holder supply with one set of spiral knurls that creates a diamond pattern.

We offer clients a wide range of spare knurling wheels which is manufactured as per below mentioned dimensions and size. The spare knurling wheels are designed with sharp edges and curves. Daaksh tools manufacturers offer you our wide ranges in pitches( 0.6 mm,0.8 mm,1.0 mm,1.2 mm,1.6 mm,2.00 mm) rold and mild (Black and gre finished) also Tin coated, Hard chromed. As a leading manufacturer we provide you in diverse profile configurations to meet the highest quality demands. Our knurling wheels are available in exclusive ranges and at all affordable ranges. As such, we as a manufacturer and supplier offer you our range that is corrosion resistant and have durability.

Dia		Width		Bore
Inch	Mm	Inch	Mm	Inch	mm
¾	19	¼	6/35	¼	5/35
¾	19	03/08/08	9.5	¼	6.35
1	25.4	3.8	9.53	¼	6.35
05/08/08	16	05/16/08	7.9	7/32	5.5
05/08/08	16	03/16/08	5	7/32	5.5
½	12/07/08	¼	6.35	03/16/08	4.95

We manufacturers offer clients a wide range of MINI clamp type knurling tools & holders that find usage in lathe machines. The precision engineering standards that undergo in manufacturing these knurls provide in them optimum functionality and service life standards. These clamp type knurling tools are designed by reckoned manufacturers of Daaksh tool who use to fit any knurling or thread rolling holders and attachments. Further these are furnished with lapped tooth finish that helps it impart smoother, cleaner tooth surfaces on parts and also prolong the tool life. Following are its specifications:

Ordering No.	Total Length		Shank Size		Size of Knurls		Working Capacity
	Inch	Mm	Inch	Mm	Inch	Mm	Inch	mm
MC Type	3.3/16	80	3/8 x 3/8 x 2.14	9.5 x 9.5 x 56	¾ x 3/8 x 1/4	19 x 9.5 x 6.35	3/16 - 3/4	5-20

We offer clients a wide range of single wheeler knurling tools & holders that find usage in lathe machines. The precision engineering standards that undergo in manufacturing these knurls also provide in them optimum functionality and service life standards. Daaksh tool manufacturers design these knurls to fit any knurling or thread rolling holders and attachments. Further these single wheeler knurling tools are furnished with lapped tooth finish that helps it impart smoother, cleaner tooth surfaces on parts and also prolong the tool life.

Ranges:

• Circular and diametral pitches for straight knurls
• Circular and diametral pitches for diagonal, normal, or transverse, 30 or 45 degree helix angles
• Male or female diamond knurls
• Metric pitches, straight and diagonal convex, concave, or conical type knurls
• Special tooth form knurls
• Standard, HSS, or high cobalt material based knurls
• Shank type knurls for face knurling

Ordering No.	Holder Size		Sizes of Knurls		Knurl Pattern
	Inch	Mm	Inch	Mm
1019	½ x ½ x 4.1/2	12.7 x 12.7 x 115	2/4 x ¼ x ¼	19 x 6.35 x 6.35	Medium
1020	¾ x ¾ x5	19 x 19 x 125	¾ x 3/8 x ¼	19 x 9.5 x 6.35	Medium

These six wheeler knurling tool are designed to fit any knurling or thread rolling holders and attachments. Further these six wheeler knurling tool are furnished with lapped tooth finish that helps it impart smoother, cleaner tooth surfaces on parts and also prolong the tool life.  We as a leading manufacturers provide you with following specifications:

Ordering No.	Holder Size		Sizes of Knurls		No. of pairs
	Inch	Mm	Inch	Mm
1112	5/16 x ¾ x5	8 x 19 x 125	5/8 x 5/16 x 7/32	16 x 8 x 5.5	3 Pair
1113	3/8 x 7/8 x 5.1/2	9.5 x22 x 138	5/8 x 5/16 x 7/32	16 x 8 x 5.5	3 Pair
1114	½ x 1.1/8 x 6.1/2	12.7 x 28 x 163	¾ x 3/8 x 1/3	19 x 9.5 x 6.35	3 Pair
1115	5/8 x 1.3/8 x 7.1/2	16 x 35 x 188	¾ x 3/8 x 1/3	19 x 9.5 x 6.35	3 Pair

 

We offer you our Spare knurl in all size of inches and mm pitches. Spare knurls are also available in black, grey finished, tin coated, hard chromed for longer life of knurl. We as a reckoned manufacturer offer quality range of spare Knurls that are widely used across various industrial purposes. We even custom design these knurls as per client specific requirement. We manufacturers fabricate it by using superior quality speed steel. These accurately machine Spare knurls are offered in right, left & checkered shapes.

We are one of the leading manufacturers of two wheeler knurling tool which is fabricated using quality raw material. Designed in compliance with international quality standards, these holders are appropriately machined and grounded to enhance easier usage. These knurling tools can be supplied with quality and high speed knurls as per the requirement of the client. As such, Daaksh tools manufacturers offer clients a wide range of two wheeler knurling tool with standard quality in Delhi (India). The precision engineered product is designed as per the dimension mentioned below. It has the following specifications:

Ordering No.	Holder Size		Sizes of Knurls		No. of pairs
	Inch	Mm	Inch	Mm
1017	½ x ½ x 4.1/2	12.7 x 12.7 x 112	¾ x 3/8 x1/4	19 x 9.5 x 6.35	1 Pair