We offer clients a wide range of single wheeler knurling tools & holders that find usage in lathe machines. The precision engineering standards that undergo in manufacturing these knurls also provide in them optimum functionality and service life standards.

These knurls are designed to fit any knurling or thread rolling holders and attachments. Further these single wheeler knurling tools are furnished with lapped tooth finish that helps it impart smoother, cleaner tooth surfaces on parts and also prolong the tool life.

Range offered:

• Circular and diametral pitches for straight knurls
  
• Circular and diametral pitches for diagonal, normal, or transverse, 30 or 45 degree helix angles
  
• Male or female diamond knurls
  
• Metric pitches, straight and diagonal convex, concave, or conical type knurls
  
• Special tooth form knurls
  
• Standard, HSS, or high cobalt material based knurls
  
• Shank type knurls for face knurling

Ordering No.	Holder Size		Sizes of Knurls		Knurl Pattern
	Inch	Mm	Inch	Mm
1019	½ x ½ x 4.1/2	12.7 x 12.7 x 115	2/4 x ¼ x ¼	19 x 6.35 x 6.35	Medium
1020	¾ x ¾ x5	19 x 19 x 125	¾ x 3/8 x ¼	19 x 9.5 x 6.35	Medium

These six wheeler knurling tool are designed to fit any knurling or thread rolling holders and attachments. Further these are furnished with lapped tooth finish that helps it impart smoother, cleaner tooth surfaces on parts and also prolong the tool life. Following are the specifications of six wheeler knurling tools:

Ordering No.	Holder Size		Sizes of Knurls		No. of pairs
	Inch	Mm	Inch	Mm
1112	5/16 x ¾ x5	8 x 19 x 125	5/8 x 5/16 x 7/32	16 x 8 x 5.5	3 Pair
1113	3/8 x 7/8 x 5.1/2	9.5 x22 x 138	5/8 x 5/16 x 7/32	16 x 8 x 5.5	3 Pair
1114	½ x 1.1/8 x 6.1/2	12.7 x 28 x 163	¾ x 3/8 x 1/3	19 x 9.5 x 6.35	3 Pair
1115	5/8 x 1.3/8 x 7.1/2	16 x 35 x 188	¾ x 3/8 x 1/3	19 x 9.5 x 6.35	3 Pair

This is the internal knurling tool holders to expand the under sized bore, with straight, right, left and diamond knurls. Straight knurls are often used on the end of a shaft that is to be pressed into another part. Straight or diamond knurl patterns are used to provide better grip on handwheels and thumbscrews.

Knurls are pressed or embossed into the surface of a part rather than cut. Material is moved from one position to another under pressure. Doing so can involve quite a bit of force, which is hard to achieve from a single direction on a small machine. For this reason, internal knurling tool holders are developed that squeezes two knurling wheels against the part from opposite sides, relieving stress on the machine itself.

Spare knurl available in all size of inches and mm pitches. Also in black, grey finised, tin coated, hard cromed for loger life of knurl.

Another range of clamp type holder, increases life of machine. Because it does'nt put load on machine.