Sturdy Valves

Deluge Valve model F100D-A are manufactured with Dry Trim (Pneumatic Actuated) and Wet Trim (Hydraulically Actuated). Both options are available with Electrical trim Solenoid Actuated (Model F100 D-8).  All trims are factory piped on the Valve itself.  It also has Manual Station as Test Trim, Manual Override and Drain Line.  The valve opens on demand to provide water flow to the fire protection sprinkler systems.  Pilot system can be hydraulically, pneumatically or manually operated.  Opening of the Value is by electrical signal to solenoid valve/loss of control pressure.  The Pilot and Diaphragm design has many advantages as:

• Quick respose / fast opening
• Low frication
• High flow capacity
• Minimum maintenance
• Imported Diaphragm & Patented Quad Seal Ring for Zero leakage Size : 50 NB - 400 NB

(IBR Approved) Open Bonnet, Convectional Design, Open Cap with Lever. Designed as per API 526/ API 520 and also as per ASME Section VIII ideally suitable for Steam Service. Set pressure various from 0.7 kg/cm² to 110 kg/cm². More then 5000 valves installed on boilers across the country. 

Valve Size	25 x 50 NB to 250 x 350 NB
Rating	BS 10 Table H, Class 150 to Class 900
Orifice Size	G(20.0 mm) to V(181.0 mm)
End Connection	Flanged
Material	Carbon Steel, Stainless Steel & Alloy Steel.

Gas Pressure Regulators : F -166 HP, Type F-166 HP Regulators are Self Actuated - Spring & Diaphragm operated for precise control of Gas pressure for maximum combustion efficiency in commercial gas installation.  The Regulators maintain the outlet pressure steadily irrespective of varying inlet pressure in the pipeline.  These high capacity regulators are used for Air, Nitrogen, Natural Gas , Hydrogen and many other Industrial Gases. 

Sizes	15 NB to 150 NB
Rating	Class 150 & 300 Class
Maximum inlet pressure	20 kg /cm³
Minimum outlet pressure	50 mm WC
Material	Carbon Steel & Stainless Steel

Small Sized Flanged End Relief Valve Ideal for Pipe Line and Small Reactors in Pharma Industries. 

Valve Size	15 x 25 Nb, 20 x 25 NB & 25 x 40 NB 40 x 50 Nb & 50 x 50 NB
Rating	ANSI 150 LBS to 1500 LBS.
Material	Cast Steel & Stainless Steel – Investment Cast
End Connection	Flanged End.
Orifice	7mm, 10mm, 12mm & 16 mm

Similar to SVC -500, but with closed Bonnet & Closed Cap.  Also available with Packed Lever, Bellow Seated and Soft seat for critical services.  Valve size, orifice and rating some as SVC -500. 

Valve Size	25 x 50 NB to 250 x 350 NB
Rating	BS 10 Table H, Class 150 to Class 900
Orifice Size	G(20.0 mm) to V(181.0 mm)
End Connection	Flanged
Material	Carbon Steel, Stainless Steel & Alloy Steel.