|
What We Offer 
| View all our products / services as a slide show.
|
|
Industrial Heaters
We are one of the leading manufacturers, exporters and suppliers of a wide range of water treatment systems. These heaters are manufactured using premium quality raw material, which increases their efficiency and functional life. Further, to meet the diverse requirements of our clients, we also offer customized solutions to them. Our wide range encompasses: |
| | | Coil Heaters  | Micro Coil Heaters are hygroscopic in nature due to Mgo contents. if kept unused for longer period, there is moisture deposition on the terminals. therefore we recommend you to de-moisturize the heater prior to installation by heating them at 100-200 C in an oven for approximately 1 to 2 hours or use controllers with soft start function. This will help evaporate any moisture present inside.
Other Information
- Pay Mode Terms: T/T (Bank Transfer)
|
| Tubular Heaters | Formed Tubular Heaters can be supplied in either Stainless Steel or Incoloy. The helical wound heating wire is made of a high temperature resistant NiCr alloy. And the insulation consists of superior grade of magnesium oxide (MgO). As the heaters are swadged, even at high sheath temperature they have excellent electrical insulation and a high heat transfer. To prevent the heater from moisture the connection ends are sealed with sealing components. For manufacturing formed elements it is necessary to have a accurate dimensional sketch showing all the centre distances, radius and degrees, thus they need to be provided while placing the order. | |
| | | Cast In Brass Coil Heaters | We offer quality Cast In Brass Coil Heaters to our clients across the globe, which are known for their features such as high temperature tolerance, application specific design and durability. These Cast In Brass Coil Heaters are advance concept of thermal engineering, which are similar to high watt density cartridge heaters. Also known as high performance tubular heaters or cable heaters, the construction of these heaters consist of compacted MgO, high temperature resistance wire and stainless steel tube. Moreover, we can manufacture these heaters with or without built in thermocouples. Generally installed in the place where space available for heating is limited and are widely used on hot runner nozzles, and manifolds, die cast nozzles and packaging machines.
|
| Micro Tubular Coil Heaters | We are offering to our clients, Micro Tubular Coil Heaters, which are swaged and compacted to their diameters and fitted into special clamps to tighten over circular parts for heating purpose. These are manufactured as per the industry standards and are provided to our clients in customized specifications. | Watts | Heated Length | Cold Length | Volts | J'type Thermocouple | w/cm2 | | 250 | 280 mm | 50 | 230 | Yes | 6.6 | | 330 | 400 mm | 50 | 230 | Yes | 6 | | 400 | 510 mm | 50 | 230 | Yes | 5.75 | | 470 | 600 mm | 50 | 230 | Yes | 5.75 | | 550 | 720 mm | 50 | 230 | Yes | 5.6 | | 650 | 840 mm | 50 | 230 | Yes | 5.7 | | 750 | 1020 mm | 50 | 230 | Yes | 5.4 | | 850 | 1150 mm | 50 | 230 | Yes | 5.4 | | 1000 | 1400 mm | 50 | 230 | Yes | 5.25 | | 1100 | 1650 mm | 50 | 230 | Yes | 4.9 | | 1200 | 1800 mm | 50 | 230 | Yes | 4.9 | | |
| | | High Density Cartridge Heaters | We are manufacturing and supplying High Density Cartridge Heaters, which are designed to withstand a sheath temperature of up to 1500 ºF. Manufactured as per the industry standards, these are known for their features like high on performance, longer service life and less power consumption.
Technical Specifications
| Outer sheath material | Stainless Steel 304, | | welded end disc washer of same | | material maximum operating | | temperature 750° C. Sheath can be | | ground for precision tolerance. | | Heating conductor | NiCr 80:20 | | Power tolerance | 10.00% | | Voltage | 12 volts to 440 volts | | Leakage current | < 5 mA | | High voltage | 800 volts | | Surface loading | Upto 50 watts/cm2 | Launching
Hi-density Cartridge Heaters Features - High Watt density design.
- Fast heat transfer efficiency.
- High dielectric strength.
- Shock and vibration resistant.
- High thermal conductivity and uniform heating due to swaging.
ApplicationsIt finds varied applications including - Injection Moulds
- Dies
- Hot Plates and Platens
|
| Nozzle Heaters  | We offer a range of high performance nozzle heaters that are reckoned for its robust design and efficiency. The coil heater is mounted over the brass collet, which is designed and machined to high accuracy for proper transfer of heat and are covered with a stainless steel clamping band. When the clamping band is tightened, the brass collet firms its grip over the nozzle that results in efficient performance. Our nozzle heaters are ideal for use in hot-runner molds. | |
| | | Tubular & Immersion Heaters | We offer to our clients, Tubular and Immersion Heaters, which are ideal for heating fluids. These combine several tubular elements and a monting attachment. We can customize these for our clients as per their varied requirements. |
We are engaged in manufacturing and supplying of Mica Band Heaters, which are used in the most challenging applications like in extrusion processes machine and the plastic injection molding. These heaters use very low watt density and can be personalized according to clients’ requirement.
Features - Consists of mica & mica sheet and can work upto 600" C
- Ni-corme 80/20 strip wire.
- Max working temp. upto350"C.
- Packing density 20 W/sq inch.
- Can be made with or without jackets in order to save power for different applications.
Applications - Heating for plastic processing machinery
- Moulds and Dies
- Rubber Industry
- Oven & Thermocouples
| |
| | We are offering to our clients, Ceramic Heaters, which are used to heat the cylinders (barrels) on all types of plastic(s) processing machinery. Their higher watt densities provide higher operating temperatures. We can customize these as per the varying requirements of our clients.
Features - Control of steatite ceramic material can work up to 800° C, Ni-crome 80/20 wire.
- Maximum working temp, up to 500° C.
- Packing density 60 W/sq inch.
- Can be made as air cooling perforated ceramic heater for fast cooling and heating
- Power saving up to 30 % for same.
Applications - Plastic processing machinery
- Chemical vessels
- Rubber Industry
- Packaging Industry
|
| Cast Aluminium Heaters | We are engaged in manufacturing and exporting a wide range of Cast Aluminum (cast-in) Heaters, which ensure a high quality and efficient method of heating and controlling Extruders, Compression Molding Platens, Heat Sealers, Vacuum Forming Platens. Manufactured as per the industrial standards, these are known for their easy operations and longer service life. | |
|
