Our company offers gate valves, which are designed to provide minimum turbulence & resistance to flow when in fully open position. These gate valve ensures accurate control & alignment of wedge while operating. The technical specifications are:

Technical Data:

Manufacturing Std. :Generally conforming to BS 5352
End Connection :Screwed Ends to BSP / BSPT/ NPT (F)
Socket Weld Ends to ANSI B 16.11
Inspection and Testing Std :AP 598

Test Pressure

Testing	Body	Seat
Hydraulic	425 PSIG	300 PSIG

All dimensions are in M.M

Size	L	SCR. Ends
		Oc	E
15	53	½”	13.56
20	63	¾”	13.87
25	73	1”	17.35
40	80	1 ½”	18.38
50	85	2”	19.23

P. No	Nomenclature	Material
1	Body	ASTM A 351 Gr, CF8/CF8M
2	Bonnet	ASTM A 351 Gr, CF8/CF8M
3	Wedge	ASTM A 351 Gr, CF8/CF8M
4	STEM	ANSI 304/316
5	STEM RETAINERS	AISI 304/ 316
6	Gland	AISI 304/ 316
7	Gland Nut	AISI 304/ 316
8	Steam Packing	PTFE GRAFOIL
9	Hand Wheel	Cast Iron Alluminum
10	Hand Wheel Nut & Washer	SS 304 M.S. plated

We offer globe valve, which is used for single direction flow control and is also efficient for throttling services. These valves are designed for least possible obstruction to free flow. Some of the technical specifications are:

Technical Data:

Manufacturing Std. :Generally conforming to BS 5352
End Connection :Screwed Ends to BSP / BSPT/ NPT (F) Socket Weld Ends to ANSI B 16.11
Inspection and Testing Std :BS 6755 (Part – I)

Test Pressure

Testing	Body	Seat
Hydraulic	425 PSIG	300 PSIG

All dimensions are in M.M

Size	L	SCR. Ends
		Ø C	E
15	60	½”	13.56
20	70	¾”	13.87
25	80	1”	17.35
40	100	1 ½”	18.38
50	120	2”	19.23

P. No	Nomenclature	Material
1	Body	ASTM A 351 Gr, CF8/CF8M
2	Bonnet	ASTM A 351 Gr, CF8/CF8M
3	Wedge	ASTM A 351 Gr, CF8/CF8M
4	STEM	ANSI 304/316
5	STEM RETAINERS	AISI 304/ 316
6	Gland	AISI 304/ 316
7	Gland Nut	AISI 304/ 316
8	Steam Packing	PTFE GRAFOIL
9	Hand Wheel	Cast Iron Alluminum
10	Hand Wheel Nut & Washer	SS 304 M.S. plated

Our company is engaged in the manufacturing of safety valve, which provide protection from over-pressure in steam, gas, air and liquid lines. The valve "lets off steam" when safe pressures are exceeded, then closed again when pressure drops to a preset level. Some of the specifications are:

Size	½” to 4” (15 mm to 100 mm) Design & Manufactured Standard : Manufacturing Standard Pressure Test Standard: Manufacturing Standard Spring loaded Relief type open Discharger Enclosed Discharger
Body & Bonnet	AISI 304/316
Spring	AISI 304/316
Ends	Screwed to BSP / BSPT / NPT
Set Pressure	150 psig (10 kg/cm²)
Optional	Safety Valves Confirm to API 256
Ends	Flanged to ANSI B16.5 Table D / E F other Material & Specifications are Welcome

Sr No	Descripyion
1.	Body
2.	Bonnet
3.	Adjustment Ring
4.	Adjustment Ring stop Pin
5.	Valve
6.	Washer
7.	S.S Spring
8.	Spindle
9.	Adjustment Pin Nut
10.	Adjustment Pin

We offer swing type check valves, which are precision designed to provide satisfaction to our clients. These are manufactured from qualitative range of raw materials and are available in a broad spectrum of sizes and materials at most competitive prices.
Some of the specifications are:

Material List

No.	Part Name	Material
1	Body	ASTM A 351 Gr. / CF8M
2	Plug	ASTM A 351 Gr. / CF8M
3	Plug Seal	PTFE
4	DISC	ASTM A 351 Gr. / CF8M
5	Hanger Pin	SS 318
6	Bonnet	ASTM A 351 Gr. / CF8M
7	Body Seal	PTFE

Dimensions

Size	A	H	L
½”	15.0	42.0	65.0
3/4”	20.0	51.0	80.0
1”	25.0	60.0	90.0
1 ¼”	32.0	66.0	105.0
1 ½”	40.0	75.	120.0
2”	50.0	80.0	140.0

Our company offers left check valve, which are ideal to reduce flow resistance and pressure drop to the minimum possible level. They are perfectly engineered, lapped and screwed in seat to ensure tight shut-off and long life.

Size	L	SCR. Ends		S. W Ends OD
		Oc	E	Max.	Min.	F (Min.)
15	53	½”	13.56	22.22	21.72	9.65
20	63	¾”	13.87	27.56	27.05	12.7
25	73	1”	17.35	34.29	33.78	12.7
40	80	1 ½”	18.38	49.15	48.64	12.7
50	85	2”	19.23	61.62	61.11	15.75

Testing	Body	Seat
Hydraulic	425 PSIG	300 PSIG

P. No	Nomenclature	Material
1	Body	ASTM A 351 Gr, CF8/CF8M
2	Cover	ASTM A 351 Gr, CF8/CF8M
3	Valve	AISI 304/316
4	Gasket	PTFE

Our company offers stainer valve, which are precision designed to provide satisfaction to our clients. These are manufactured from qualitative range of raw materials and are available in a broad spectrum of sizes and materials at most competitive prices.

P. No	Nomenclature	Material
1	Body	CF 8 (S.S 304)ASRMA 351	CF 8 (S.S 316)ASTM A 351
2	Cap	CF 8 (S.S 304)ASRMA 351	CF 8 (S.S 316)ASTM A 351
3	Cap Seal	PTFE	PTFE
4	Screen(Mesh)	CF 8 (S.S 304)PERF SAHEET	CF 8M (S.S 316)PERFSAHEET

Size	A	B	C
15 mm	66	40	1/22" BSP
20 mm	70	49	3/4: BSP
25 mm	99	49	1" BSP
32 mm	On Request
40 mm	107	77	1 1/2" BSP
50 mm	127	81	2" BSP
65 mm	On Request
80 mm	On Request
100 mm	On Request

We offer ball valves as per international standards as well as per clients' specifications and requirements. These ball valves are used generally for quick shut off.

Specifications:

• Range: ½'' to 12''
• Pressure Class: ANSI 150# to 600#
• End Connections: Flanged, Screwed, Butt and Socket Welded, Victolic End
• Manufacturing Standards: BS-5351
• Face to Face: as per ANSI B 16.10.
• End Flanges: as per ANSI/BS/DIN
• Testing Standard : API-598
• Body Type: Single/Two/Three piece design
• Ball: Full/Reduced Bore

Parts	Material
Body	W.C.B.	CF 8	CF 8M
Bonnet	W.C.B.	CF 8	CF 8M
Wedge/Plug		304	316
Seat		304	316
Spimdle		304	316
Gland Bush		304	316
Glande Flange	M.S.	304
Yoke sleeve Yoke Nut	304/316
Hand Wheel	Cast Steel
Hand Wheel Nut	Gr. 2h
Collar bolt/ Stud& Nut	B7/2H	S.S.
Eye Bolt & Nut	B7/2H	S.S.
Gasket	SPW S.S 304 / 316 with CAF / GRAPH Oil
Gland Packing	Graphite Asbestos
Screw Rivet & Washer	Steel
Bearing Washer	T 304	T316
Grub Screw	Gr. B7
Grease Nipple	C.S. Nicke Plated
Name Plate

INVESTMENT CASTING GATE VALVE FLANGE END ASA 150#
TEASTING AS PER STANDERD

W.C.B.SAFETY VALVE FLANGE END AS PER STANDERD
MFG IN VERIOUS SIZE ON DIMAND
SIZE RANGE:
1" X 1.1/2"
1.1/2" X 2"
2" X 2"
2" X 2.1/2"
2" X 3"

ALSO AVILABLE IN S.S.304 / S.S.316 / CAST IRON SAFETY VALVE