Dataseal offers Silicone Transparent tubings/braided hose, which confirms to USP VI FDA21 171.2600 requirements.

• Size 0.2mm to 100 mm.
• Wall Thickness: 3 to 8 mm
• ID with various wall thickness and lengths as per standard & customers specifications.

Application

• The hose are ideally suited for increase pressure and/or high temperature applications.
• Uuse in food, pharma, clinical, laboratory & medical applications.

We also offer braided reinforced Silicone transparent tube/hose incorporating strong Polyester braiding between extrusions of silicone [Hardness 65 Shore A].

• Withstand Pressure:6-20 kg/cm2 at temperature of 100 F.
• Size: ID=1/8, ¼, 3/8, ½, 5/8, ¾, 1", 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2".

Dataseal offers Medical & Pharma grade silicone tubings are designed for use in variety of clinical, laboratory, electrical, electronic, healthcare fields, food processing applications. We manufacture tubings as per USP Class VI FDA 21 CFR 177.2600 requirements.

Specifications

• Normal Width: 1 mtr/ 1.2 mtr.
• Lengths: 1 mtr., 2 mtr, or Running length (5 to 20 mtr.)
• Thickness: 1mm to 25mm [with or without reinforcement]
  
  (NOTE: with reinforcement thickness 0.3mm to 5mm)
• Reinforcement: with Nylon, Canvas, Polyester, Fibreglass etc.
• Colours: Transparent(in silicone), Red, White, Black, Green, Yellow, blue, orange etc. in all range of rubbers.

We offer premium quality silicon gaskets, these are available in T, U, L, D, O, U, Y, E, P category. We keep large inventory of available extrusion tools, In case of non-availability, efficient tooling capability, further processing to customer specifications.

Extrusion profiles are not stock items. They are typically made in customer's request and specifications.

We offer all types of rubber and PTFE teflon gaskets. Manufactured by moulding, die-cutting and extrusion capalities. It is manufactured by using:

• Neoprene
• Viton EPDM
• Nitrile
• Silicone
• Butyl
• Polyurethane
• Fluorosilicone
• Polyacrylic
• Hypalon
• Sponge Rubber
• Foam
• Filled Grade PTFE-Teflon

We also offer endless gaskets/ O-rings of more than one metre ID in various thickness.

A PTFE-TEFLON envelope gasket is a gasket that is split or machined from the outside diameter wall to 1/16 of an inch from the inside diameter. Envelope gaskets can be supplied in slit/v-type or milled/square cut with or with out a filler.

Features

• Pipe gaskets manufactured with a slit-type PTFE-Teflon envelope protective covering, which imparts the mechanical strength, resilience and bolt load retention of compressed sheet together with the chemical resistance of PFTE (Teflon).
• Maximum Service Temperature: 550 F, Used in equipment with glass-coated steel flanges.
• Available: in 1/16" or 1/8"
• Thickness with eight standard fillers: Compressed sheet, neoprene, EPDM, BUNA-N, silicone, Viton, Hypalon, and- when a higher pressure resistance is required-- corrugated stainless steel. Pipe sizes: 3/4" through 12" diameter.
• Additional Fillers: white neoprene, butyl, plant fiber, red rubber, CI rubber and gum rubber.
• Applications: Ideal for the chemical and petrochemical industries.

Our PTFE gaskets are a unique combination of frictional, chemical, thermal and electrical properties.

Applications

• O-rings
• Pump Impeller
• Valve Seals
• Bushes
• V-rings
• Expansion Bellows
• Sleeves in Heat Exchanger Equipment
• Piston Rings
• Metal Molded with PTFE
• Valve Holder
• Barb Insulator
• Hydraulic Seals
• Diaphragm
• Bearing Plates
• Piston Rings
• Pipe & Tubings
• Reactor Manhole Gaskets
• Elliptical Vessel Gaskets etc.

Dataseal offers multiparts system which consist of one rubber ring, an additional Back-up and guiding element. The combination of these different element gives origin to a compact and efficient seal that can be easily mounted on pistons.


This robust seal comprises a gland ring/female adapter, header/male adapter, and one or more intermediate V-shaped rings.

The rings are tapered to give an initial interference when confined in the seal housing. The radial force that results, together with the fine finish of the lip, ensure a good seal at low or slack pressures.Excellent resistance to extrusion and wear.Suitable for adjustable and non-adjustable housings.

We - Dataseal India offer Diaphragms in rubber with fabric reinforced & PTFE(TEFLON) for use at high pressure & high temperature and corrosive media.

Our range of diaphragms includes:

• Plain Diaphragm Rubber
• Concave Diaphragm Rubber
• Convex Diaphragm Rubber
• Saunder's Diaphragm Rubber
• Cup Type Diaphragm Rubber
• Hat Type Diaphragm Rubber
• Saucer Type Diaphragm Rubber with or without fabric reinforcement

Our Diaphragms are made from

• Silicone
• Viton
• Nitrile
• Neoprene
• EPDM
• Butyl
• PTFE (Teflon)

Dataseal Braided Reinforced Silicone Transparent Hoses/Tubes incorporating strong polyester braiding between extrusions of silicone.

Features

• Withstand Pressure:6-20 kg/cm2 at temperature of 100'F
• Size: ID=1/8, ¼, 3/8, ½, 5/8, ¾, 1", 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2"
• Wall Thickness: 4 to 10 mm

Application

• Tubings/Hoses are ideally suited to increase pressure and/or high temoerature applications.
• These silicon braided hoses are widely used in food, pharma, clinical, laboratory & medical applications, which confirms to USP VI FDA21 171.2600 requirements.

We manufacture & export premium quality moulded extruded rubber cords. These industrial cords are made out of:

• Viton
• Silicone
• Neoprene
• Nitrile
• Butyle
• EPDM (Ethylene Propylene Diene Monomer) Rubber
• PBR
• Polyurethene
• Natural Rubber

Our cords can be customized as per customer's requirement.