Simple construction quick easy installation flexible insert caters for incidental angular, paralled and axil misalignment. Absorbs shock loads and damps small amplitude vibration. Spacer Coupling with Spacer Size depending upon the distance between two shaft ends. The inserts spider made in developed rubber compounds are used in Jaw Couplings to absorb shock loads torsional vibrations and slight misalignments. Available in a range of stock bore sizes, can also be supplied with finished bore and keyway.

Gear Couplings also called Jay Gear Couplings are power dense and capable of transmitting high torque at high speeds while still remainging inherently well balanced. Gear Couplings transmit torque by the mating on two hubs with external gears teeth that are Joined by flanged sleeves with internal Gear Teeth. Large tooth profile for longer life, Interchangable with other IND, STD Gear Couplings. Torque up to 81709 Nm, bore up to 260 mm.

We offer "Pin Bush Type Flexible Couplings". The function of Pin Bush Type Flexible Couplings is to Transmit torque from one shaft to another in cases where limited misalignment may occur and also to absorb shock loads. The Jay Pin Bush Type Flexible Coupling transmits the torque through high tensile steel bolts to the machine in put shaft, highly developed rubber compounds are used in bushes to absorb shock loads, torsional vibrations and slight misalignments. Machines which are to be coupled by flexible couplings should first be aligned with all possible accuracy. It may contain the following features:

Features:

• The flexible couplings is capable to transmitting high torques at maximum speeds.
• The flanges are manufactured with cast iron grade 20 of IS 210.
• The flexible rubber bushes remain unaffected by water dust and atmosheric condition.
• This type of couplings permits drive in either direction
• They dont require neither lubrication nor adjustment after fitting.
• Available in Taper lock bushed or finished bore size with keyway.
  

Our quality range includes high quality automotive gears that includes spar, bevel, helical, warm & worm wheel, rack & pinion gears. These are made from cast iron, steel, bronze metal and other custom material of construction and dimensions as required by our clients.

V Groove Pulleys(Sheaves) with V Belts used to transmit rotating mechanical power between two shafts on medium to high speed applications. It has the following features:

Features:

• Jay V Sheaves Economical cost per HP Transmitted. Shock load and vibration isolation clean quiet operation.
• Classical and Wedge style groove profiles.
• Stock sizes from are 1 to 12 grooves 1.5" to 36" in diameter.
• Available in QD and Taper lock bushed or finished bore with keyway.
• Made to order designs also available.

Tapered Split Bushings that fit into a matching tapered bore in a Sheave, Sprocket, Pin Bush Couple, Pulley etc. used to securely mount the product on to a shaft. Tapered split bushings offered by us have the following features:

Features:

• No need for remachining.
• Tapered bushing compensates for normal vibrations in shaft and component dimensional tolerances.
• Easy-On/Easy-Off
• No fretting corrosion between bore and shaft.
• Stock sizes availble to handle up to 6" shaft dimeter.
• Taper Lock Varieties : 1008, 1108, 1210, 1215, 1310, 1610, 1615, 2012, 2517, 2525, 3020, 3030, 3535, 4040, 4545, 5050, 6050, 7060, 8060, 10085, 120100.
• QD (Bushings Type): JA, SH, SDS, SD, SK SF E, F, J, M, N, P, W, S.
• Material Used: Steel, Cast Iron, S.G. Iron, Stainless Steel.
  

We offer a large assortment of industrial sprockets viz. simplex, duplex, triplex. These are available in various range and dimensions, to befit the specific and distinct needs of our clients. We can also custom design these sprockets, in terms of material of construction & other precision configurations.

We are leading manufacturer of Milling Machines in India. These are of high quality and are used in various applications.

UNIVERSAL MILLING MACHINE XM-2

 Technical Specifications:

           Table:

• Table Length x Width 1000 x 250 mm
• Clamping Area 850 x 250 mm
• "T" Slote no. 3 Centre distance between ?T? Slote 75 mm 
   
  AXES TRAVEL:
  
• Longitudinal Travel 500 mm 
• Vertical Travel 400 mm
• Spindle centre to Table face (When table is complete down position) 475 mm
• Transverse Travel 225 mm                   
  
  SPINDLE:
  
• Spindle nose taper ISO 40
• No. of Speed 6 
• Speed Range 45 to 755 rpm 
• Arbor dia. 25.4 mm
  
  FEED:
     
• No. of Feed 3.
• Range of Feed 19/36/65 mm/minute 
  
  POWER:
  
• Main Motor 2 hp/1440 rpm
• Coolant Pump 1/10 hp 
  
   WEIGHT & SPACE:
•  Gross Weight 1400 kg. 
   Space Occupied L X W X H 1500X1200X1800 mm