Deki Electronics Limited

MAIN APPLICATION: Blocking, bypassing, filtering, coupling and
decoupling, interference suppression in low voltage applications,
low pulse applications.
CONSTRUCTION: Film/foil inductive type construction with
aluminum foil as electrode and polyester (PET) film as
dielectric, coated with flame retardant epoxy resin.
CLIMATIC CATEGORY: 40/100/56
MAX. TEMPERATURE RATING: 125° C
APPLICABLE SPECIFICATION: IEC 384-11
CAPACITANCE VALUE, RATED VOLTAGE (DC): Refer dimension
chart.
CAPACITANCE TOLERANCE: ± 5%, ± 10%
VOLTAGE PROOF (Between terminals):
2 times of rated voltage for 2 seconds.
INSULATION RESISTANCE:
TAN δ: 0.8% (maximum) at 1 kHz.
LIFE TEST CONDITIONS (Loading at elevated temperature):
Loaded at 1.5 times of rated voltage at 85° C or 1.5 times of
category voltage at 100° C for 1000 hours. Category voltage is
80% of rated voltage.
AFTER THE TEST
Δc/c: ≤ 5% of initial value.
Change in Tan δ: ≤ 0.01 or 1.2 times the value measured before
the test, whichever is higher.
Insulation resistance: ≥ 50% of the value mentioned in IR chart.
APPROVALS: Tested at ERTL (North) as per IEC 384–11.
Permissible AC Voltage VRMS vs. Frequency F at Ambient Temperature 25º C
Minimum Insulation Resistance RIS VR CR ≤ 0.33 μf CR > 0.33 μf
(or) time constant T=CR x RIS ≤ 100V DC 30 GΩ 10000s
at 25° C, relative humidity ≤ 70% ≥ 250V DC 100 GΩ 10000s

MAIN APPLICATION: Capacitor discharge ignition used in twowheeler
ignition systems.
CONSTRUCTION: Low inductive cell of metallised polyester or
metallised polypropylene film coated with flame retardant grade
epoxy resin.
CLIMATIC CATEGORY: 40/85/56
APPLICABLE SPECIFICATION: IEC 384-2 (MPET), IEC 384-16 (MPP)
CAPACITANCE VALUE: Refer dimension chart.
RATED VOLTAGE (DC): 400V
CAPACITANCE TOLERANCE: ±10%
VOLTAGE PROOF
Between terminals: 1.6 times of rated voltage for 2 seconds.

MAIN APPLICATION: Blocking, bypassing, filtering, timing,
coupling and decoupling, interference suppression in low voltage
applications, low pulse operations.
CONSTRUCTION (BOX/DIP TYPE): Low inductive cell of
metallised polyester film encased in flame retardant box (or,
coated with flame retardant epoxy).
CLIMATIC CATEGORY: 55/100/56
APPLICABLE SPECIFICATION: IEC 384-2
CAPACITANCE VALUE, RATED VOLTAGE (DC): Refer dimension
chart.
CAPACITANCE TOLERANCE: ±5%, ±10%, ±20%

MAIN APPLICATION: Blocking, bypassing, filtering, timing,
coupling and decoupling, interference suppression in low voltage
applications, low pulse operations.
CONSTRUCTION (DIP/BOX TYPE): Low inductive cell of
metallised polyester film coated with flame retardant epoxy
resin (or, encased in flame retardant box).
CLIMATIC CATEGORY: 40/100/56
APPLICABLE SPECIFICATION: IEC 384-2
CAPACITANCE VALUE, RATED VOLTAGE (DC): Refer dimension
chart.
CAPACITANCE TOLERANCE: ±5%, ±10%
VOLTAGE PROOF
Between terminals: 1.6 times of rated voltage for 2 seconds.

MAIN APPLICATION: Blocking, bypassing, filtering, timing,
coupling and decoupling, interference suppression in low voltage
applications, low pulse operations.
CONSTRUCTION (BOX/DIP TYPE): Low inductive cell of
metallised polyester film encased in flame retardant box (or,
coated with flame retardant epoxy).
CLIMATIC CATEGORY: 55/100/56
APPLICABLE SPECIFICATION: IEC 384-2
CAPACITANCE VALUE, RATED VOLTAGE (DC): Refer dimension
chart.
CAPACITANCE TOLERANCE: ±5%, ±10%, ±20%
VOLTAGE PROOF
Between terminals: 1.6 times of rated voltage for 2 seconds.

MAIN APPLICATION: Used in energy meters for AC applications.
CONSTRUCTION: Low inductive wound cell of metallised
polypropylene film coated with flame retardant epoxy resin.
CLIMATIC CATEGORY: 40/100/56
APPLICABLE SPECIFICATION: IEC 384-17
CAPACITANCE VALUE, RATED VOLTAGE (AC): Refer dimension
chart.
CAPACITANCE TOLERANCE: ±5%, ±10%
VOLTAGE PROOF
Between terminals: 1250V DC for 2 seconds.

MAIN APPLICATION: Oscillator, timing and LC/RC filter circuits,
snubber circuits, high frequency coupling of fast digital and
analog ICs; wherever stable capacitance w.r.t. frequency and
temperature is required. Mainly used in CFL and where stable
temperature characteristics are required.
CONSTRUCTION: Film/foil inductive type construction with
aluminum foil as electrode and PET + PP film as mixed dielectric
coated with flame retardant epoxy resin.
CLIMATIC CATEGORY: 40/100/56
MAX OPERATING TEMPERATURE: 110° C
CAPACITANCE VALUE, RATED VOLTAGE (DC): Refer dimension
chart.
CAPACITANCE TOLERANCE: ±1%, ±2%, ±2.5%, ±5%, ±10%

MAIN APPLICATION: Blocking, bypassing, filtering, coupling and
decoupling, interference suppression in low voltage
applications, low pulse applications.
CONSTRUCTION: Film/foil inductive type construction with
aluminum foil as electrode and polyester (PET) film as
dielectric coated with flame retardant epoxy resin.
CLIMATIC CATEGORY: 40/100/56
APPLICABLE SPECIFICATION: IEC 384-11
CAPACITANCE VALUE, RATED VOLTAGE (DC): Refer dimension
chart.
CAPACITANCE TOLERANCE: ± 5%, ± 10%
VOLTAGE PROOF
Between terminals: 2 times of rated voltage for 2 seconds.

MAIN APPLICATION: Blocking, bypassing, filtering, coupling and
decoupling, interference suppression in low voltage applications,
low pulse applications.
CONSTRUCTION: Film/foil inductive type construction with
aluminum foil as electrode and polyester (PET) film as dielectric
coated with flame retardant epoxy resin (or, encased in flame
retardant box).
CLIMATIC CATEGORY: 40/100/56
MAX. TEMPERATURE RATING: 125° C
APPLICABLE SPECIFICATION: IEC 384-11
CAPACITANCE VALUE, RATED VOLTAGE (DC): Refer dimension
chart.
CAPACITANCE TOLERANCE: ± 5%, ± 10%

MAIN APPLICATION: Blocking, bypassing, filtering, coupling and
decoupling, interference suppression in low voltage applications,
low pulse applications.
CONSTRUCTION: Film/foil inductive type construction with
aluminum foil as electrode and polyester (PET) film as dielectric
coated with flame retardant epoxy resin.
CLIMATIC CATEGORY: 40/100/56
APPLICABLE SPECIFICATION: IEC 384-11
CAPACITANCE VALUE, RATED VOLTAGE (DC): Refer dimension
chart.
CAPACITANCE TOLERANCE: ± 5%, ± 10%

MAIN APPLICATION: Suitable for radio interference suppression
in starters for fluorescent lamps, compact fluorescent lamps and
PL lamps.
CONSTRUCTION: Film/foil inductive type construction with
aluminum foil as electrode and polyester (PET) film as dielectric
coated with flame retardant epoxy resin.
CLIMATIC CATEGORY: 40/100/21
APPLICABLE SPECIFICATION: IEC 384-11, IEC 68
CAPACITANCE VALUE: 0.0033, 0.0047 and 0.006 μf
CAPACITANCE TOLERANCE: ± 10%, ± 20%
RATED VOLTAGE (DC): 630V

MAIN APPLICATION: Oscillator, timing and LC/RC filter circuits,
high frequency coupling of fast digital and analog ICs.
CONSTRUCTION: Film/foil inductive type construction with
aluminum foil as electrode and PP film as dielectric coated with
flame retardant epoxy resin.
CLIMATIC CATEGORY: 40/100/56
APPLICABLE SPECIFICATION: IEC 384-13
CAPACITANCE VALUE, RATED VOLTAGE (DC): Refer dimension
chart.
CAPACITANCE TOLERANCE: ±5%, ±10%
VOLTAGE PROOF
Between terminals: 2 times of rated voltage.

MAIN APPLICATION: SMPS, motor control circuits, deflection
circuit in TV sets (fly back) and monitors, electronic ballast,
snubber and SCR commutating circuits and applications with high
voltage and high current.
CONSTRUCTION (DIP/BOX TYPE): Film/foil non inductive type
construction with aluminum foil as electrode and PP film as
dielectric coated with flame retardant epoxy resin (or, encased
in flame retardant box).
CLIMATIC CATEGORY: 40/100/56
APPLICABLE SPECIFICATION: IEC 384-13
CAPACITANCE VALUE, RATED VOLTAGE (DC): Refer dimension
chart.
CAPACITANCE TOLERANCE: ±5%, ±10%
VOLTAGE PROOF
Between terminals: 2 times of rated voltage for 2 seconds.

Main Application: SMPS, motor control circuits, deflection
circuit in TV sets (fly back) and monitors, electronic ballast,
snubber and SCR commutating circuits and applications with high
voltage and high current.
Construction (DIP/BOX TYPE): Series constructed, low
inductive wound cell of metallised polypropylene film as
electrodes coated with flame retardant epoxy resin (or, encased
in flame retardant box).
Climatic Category: 40/100/56
Applicable Specification: IEC 384-17
Capacitance Value, Rated Voltage  (AC/DC): Refer dimension chart.
capacitance Tolerance : ± 5%, ± 10%
 Rated Temp. (AC), Max.Application Temp: 85°C, 100°C
Voltage Proof
Between terminals: 1.6 times of rated voltage for 2 seconds.

Main Application: SMPS, motor control circuits, deflection
circuit in TV sets (fly back) and monitors, electronic ballast,
snubber and SCR commutating circuits and applications with high
voltage and high current.
Construction (DIP/BOX TYPE): Series constructed, low
inductive wound cell of polypropylene and double side
metallised film as electrodes coated with flame retardant epoxy
resin (or, encased in flame retardant box).
Climatic Category: 40/100/56
Applicable Specification: IEC 384-16
 Capacitance Value, Rated Voltage (DC): Refer dimension
chart.
Capacitance Tolerance: ± 5%, ± 10%, ± 20%
Voltage Proof
Between terminals: 1.6 times of rated voltage for 2 seconds.

Main Application: SMPS, motor control circuits, deflection
circuit in TV sets (fly back) and monitors, electronic ballast,
snubber and SCR commutating circuits and applications with high
voltage and high current.
Construction (DIP/BOX TYPE): Series constructed,
impregnated polypropylene film, aluminum foil and metallised
polypropylene film as internal electrodes. Protected by hard,
water repellant, solvent resistant epoxy resin (or, encased in
flame retardant box).
Climatic Category: 40/100/56
Applicable Specification: IEC 384-16, 384-17
Capacitance Value, Rated Voltage (DC): Refer dimension
chart.
Capacitance Tolerance: ±2% , ±5% , ±10%
Voltage Proof
Between terminals: 2 times of rated voltage for 2 seconds.

Main Application: Where steep pulses occur, e.g., SMPS, motor
control circuits, S-correction, etc.
Construction (DIP/BOX TYPE): Low inductive wound cell of
metallised polypropylene film coated with flame retardant
epoxy resin (or encased in flame retardant box).
Climatic Category: 40/100/56
Applicable Specification: IEC 384-16
Capacitance Value,Rated Voltage (DC): Refer dimension
chart.
Capacitance Tolerance: ±5%
 Voltage Proof
Between terminals: 1.6 times of rated voltage for 2 seconds.

Main Application: SMPS, motor control circuits, deflection
circuit in TV sets (fly back) and monitors, electronic ballast,
snubber and SCR commutating circuits and applications with high
voltage and high current.
Construction (DIP/BOX TYPE): Series constructed, low
inductive wound cell of metallised polypropylene film as
electrodes coated with flame retardant epoxy resin (or, encased
in flame retardant box).
Climatic Category: 40/100/56
Applicable Specification: IEC 384-16
Capacitance Value,Rated Voltage  (DC): Refer dimension
chart.
Capacitance Tolerance: ± 5%, ± 10%, ± 20%
Voltage Proof
Between terminals: 1.6 times of rated voltage for 2 seconds.

Main Application: Mainly used in socket type fan regulators.
Construction (DIP TYPE): Low inductive cell of metallised
polypropylene/polyester film coated with flame retardant grade
epoxy resin.
Climatic Category: 40/85/21
Capacitance Value, Rated Voltage: Refer dimension chart.
Capacitance Tolerance: ±5%, ±10%
Voltage Proof
Between terminals: 1.6 times of rated voltage for 2 seconds.

Main Application: Suitable for radio suppression in small
household appliances, audio and TV circuits, general industrial
applications.
Construction: Low inductive cell of metallised polypropylene
film encased in flame retardant box potted with flame retardant
epoxy.
Climatic Category: 40/100/21
Applicable Specification: IEC 384-14
Capacitance Value: Refer dimension chart.
Rated Voltage (AC): 275V.
Capacitance Tolerance: ±10%, ±20%
Voltage Proof
2100V DC for 2 s.

Main Application: Mainly used in step type fan regulators.
Construction (DIP TYPE): Low inductive cell of metallised
polyester film coated with flame retardant grade epoxy resin.
Climatic Category: 40/85/21
Capacitance Value, Rated Voltage  (DC): Refer dimension
chart.
Capacitance Tolerance: ±5%, ±10%
Voltage Proof
Between terminals: 640V DC for 2 seconds.