Catering to wide requirements of various applications that require instantaneous stopping of the drive load we offer a precision engineered range of Brake motors, Crane motors.

These are in compliance with various industrial standards and possess following specifications:

• Frame sizes 71 to 160M
• Their operation is of 'fail safe' type i.e. the brake is applied, when, power to the motor is switched off or power failure occurs.
• Conforms to IS : 325 - for three phase induction motors
• IS : 4722 for rotating electrical machines
• Size of motor is governed by the number of start/stops per hours

Range:

• HP : 0.25hp / 0.18kw To 20 hp / 15 kw
• Frame : 63 To 160L
• RPM : 1500, 1000, 750
• Insulation Class : B, E, F
• Duty : S₃, S₄, S₅
• Enclosure : TEFC / TESC
• Protection : IP54, IP55

We manufacture a wide range of Standard Three Phase Squirrel Cage Motors making use of superior quality raw material.

Specifications:

• Frame Size : 63 to 200L
• Syn. RPM : 3000, 1500, 1000, 750
• Duty : S₁, S₂, S₃ upto S₈
• Insulation : A, B, E, F
• Enclosure : TEFC
• Protection : IP54, IP55

Adopting latest technological development we have been manufacturing a wide range of Standard Single Phase Squirrel Cage Motors. Complying with various industrial standards, these are fabricated using optimum quality raw material and possess following specifications:

Range:

• Hp / Kw : 0.25 / 0.18 kw to 3 hp / 2.2 kw
• Frame : B56,100,112,132
• Syn.RPM : 3000, 1500
• Duty : S₁
• Insulation : B, E, F
• Protection : SPDP, TEFC

Available with us is a wide range of cooling tower motors which is fabricated using superior quality raw material. Making use of latest technology we have been able to come up with a range in bulk to live up to the expectations of our clients and possess following specifications and features:

• Range:Hp / Kw : 0.5 hp / 0.37 Kw to 15hp / 11.2 kw.
• Frame: 71 to 200
• R.P.M.: 1000, 750
• Insulation Class: A, B, E, F
• Duty: S₁
• Enclosure: TESC
• Protection: IP55

Quality Specifications:

• Cooling tower motors performance conforms to IS:325
• Dimensions according to IS: 2223 (flange mounting) with IP 55
• Degree of protection as per IS: 4691
• Motors are supplied totally with enclosed surface cooled (TESC) enclosure, and the shaft extension is as supplied per party's specifications and drawing

Supplying a wide range of dual speed motors at competitive price rates we have been satisfying the ever increasing demands of our clients.

These are in compliance with various industrial standards and possess following specifications:

• Range: Hp / Kw : 0.4 hp/ 0.3 kw to 31hp / 23 kw.
• Frame: 71 to 200
• Combination of R.P.M. : 3000 / 1500, 1500 / 1000, 1500 / 750
• Insulation Class: B, E, F
• Duty: S₁
• Enclosure: TEFC
• Protection : IP55, IP54
• Offered in 2/4, 4/6, 4/8 poles
• Single stator winding in Dahlander connection - delta / double star in pole ratio 1:2 (4/8, 4/2 Pole etc.)
• Number of terminals : 6
• Two separate winding giving two different speeds - (4/6, 8/6 Pole etc.) - Number of terminals : 6

Designed and developed as per the changing trends of the market our range of torque motors is in wide demand across the globe.

These are in compliance with various industrial standards and possess following specifications:

• Range: Hp / Kw : 0.25 hp / 0.18Kw to 5hp / 3.7 Kw.
• Volts: 415, 220
• Phase: 3
• Syn R.P.M. : 1500, 1000, 750
• Insulation Class: B, E, F
• Duty: S₁
• Enclosure: TESC / SPFAC
• Protection: IP54

These are used for various applications where in the RPM of the motor is required to be changed with constant torque.
Features and specifications:

Construction:

• The winding of the motors are as same as the winding of threee phase Sq. cage motor but there is a change the rotor
• Instead of aluminum rotor, rotor is made out of M.S. rods and short circuiting ring is removed

Operation:

• The motor rpm is controlled either by providing three phase variac in series with stator winding or by providing only single phase variac in series with any one phase of supply
• As the stator voltage is increase or decrease, the emf in the stator winding becomes stronger or weaker, this results in increase or decrease of motor rpm with constant torque

Applications:

• Textile Industry
• Plastic Industry
• Machine Tools
• Steel Rolling Industry
• Wire Winding Machine

We are engaged in manufacturing a precision engineered range of textile motors that are high on performance and serviceability.

These are manufactured in accordance with latest manufacturing standards and possess following specifications and features:

• Range : Hp / Kw : 0.25 hp / 0.18Kw to 2hp / 1.5 KW
• Frame : 100 to 132
• Syn. R.P.M. : 1000, 750
• Insulation Class : B, E, F
• Duty : S₁
• Enclosure : TEFC / TESC
• Protection : IP54
• Suitable for use in Silk, Cotton and Synthetic Fiber textile mills and power looms
• Smooth acceleration, high torque, noiseless performance
• Either supplied in TESC or TEFC design
• For high-speed looms these motors can be supplied with 24 Volts D.C. disc brake
• The brake is mounted on non-driving end

Operation:

• Under no power conditions to the motor the brake armature coil mounted on non-driving and end shield get energized with desperate 24 Volts D.C. Supply, supplied through NO/NC contact of a contractor, hence the armature attracts the disc allowing the rotor to rotate freely
• When breakage of thread takes place during weaving, in a high speed loom, the supply to the motor is immediately disconnected
• As soon as the power to the motor is disconnected the armature coil get energized which instantly attracts armature disc overcoming the spring force resulting almost instantaneous stopping of rotor thus fail safe condition is ensured

Special Features:

• Being simple and rugged-in construction these motors need very little maintenance
• In the rare event of failure, repair is simple and easy
• Special brake liner is used, which ensures that, the braking torque value remains quite stable throughout the use
• Compensation for liner wear is easily done by decreasing the distance between armatures by removing the spacers provided on rotor shaft
• The design of loom brake motor facilitates a very easy replacement of armature disc and brake liner assembly

 Here are some features of our material handling equipments :

• Frame and Gear Box :

Frame is made out of steel, machined and bolted type. The gear box is having hardened alloy steel hobbled teeth helical spur gears with solid pinions, rigidly aligned with end load plates. All gears are running on ball/roller bearings with oil bath lubrication and capable of transferring maximum permissible load without noise.

• Rope Drum, Wire Rope, Rope guide and Bottom Block :

The rope drum is made from seamless pipe or fabricated from steel plates. The same is grooved to take full lift without over winding. High ratio of drum diameter to rope diameter reduces wear and cable fatigue. The rope drum shaft is made from EN steel and entire assembly rotates on ball bearings, ensuring trouble free operations for years together.

Wire rope is of 6 X 37 construction having special plough hemp core flexible steel.

Rope guide is made from cast iron. Fully encircling ring fixed around the grooves of the rope drum to ensure correct rope lay. All our hoists are supplied with rope guide and pressure ring.

Bottom block assembly consisting of drop forged steel hook, mounted on thrust ball bearing with large diameter sleeve and hook plates made from steel.

• Motors and Brakes :

Foot mounted, High torque squirrel cage induction motors. Specially designed for crane and hoist duty applications. Motors are manufactured as per IS: 325/1996, totally enclosed and having degree of protection IP-54, IP-55.
Brakes are electromagnetic, disc type, spring loaded and suitable for heavy duty application. Brakes are mounted on non-driving end of the motor and they are easily serviceable. Motors and brakes are having class `F’ insulation.

• Control Panel, Push Button Station (Pendent) and Limit Switch :

Each hoist is supplied with a M.S. fabricated, dust proof, metal cabinet control panel. Control panel is equipped with Siemens/L&T/TC make heavy duty, direct on-line sequence reversing air brake contractors, transformers and fuses. Push button station suspended by a steel chain or wire rope and all the control cables are brought in to it. Supply to the pendent push button station is either 24 or 110 Volts to avoid electrical shock to the operator. Push button switches are of reputed make and they are of 2, 4 and 6 stations, depending upon applications. Two limit switches are provided in each hoist to avoid over winding of wire rope and also to control highest and lowest position of load hook.

• Trolley :

Cross travel trolley is designed to suit either standard rolled steel joint or box girder. The trolley frame is rigidly bolted with hoist frame through series of holes. This also ensures proper adjustment of flange width. Cross Travel wheels are provided with ball bearings mounted on EN 8 steel axles. The motorized trolley units are supplied with spur gearbox. Hand geared trolley and push pull trolley is also available.

Please click the PDF to view Technical Specification

We manufacture and export in bulk Single phase Flange Motor with MS Body.

We are manufacturers and exporters of the Single Phase Motor with Aluminium Body as shown in the abouve picture.