Delta Power Solutions India Private Limited

Features

• A.C. input three Phase supply
• Hot Swappable 3000 / 7200 Watt rectifiers
• No system shutdown for maintenance
• All Modules are front accessible
• A.C. voltage monitoring and cutoff in unbalance Condition
• Class-C level surge protection
• High power density in N+1 configuration
• Battery Disconnect Breaker
• Low Voltage Disconnect
• Temperature Compensation Voltage Control
• Equalize Charge Timer
• Wide operating temperature range
• Remote monitoring and control]

Basic Specifications

• AC Input: 380/480 V rms (Three phase)
• System Max. Capacity: -48V/50A~3,240A
• Operating Temp.: 0' C ~ +55' C
• AC Distribution Mains MCB double pole Separate breaker for each Module
• DC Distribution(Customized) Load distribution (With Critical & non critical load configuration) Battery distribution (Fuse/ Breaker)

Features

• A.C. Single phase/ Three phase supply
• Complete Power plant in one cabinet Including Rectifier, Battery Disconnect and Alarm Unit
• A.C. Input single phase/three phase
• Hot Swappable 3000 Watt rectifiers, wide range PFC input
• All Modules are front accessible
• A.C. voltage monitoring and cutoff in unbalance Condition
• Class-C level surge protection
• High power density in N+1 configuration
• System dimension is (H x W x D) 750X600X600mm
• Battery Disconnect Breaker
• Low Voltage Disconnect
• Temperature Compensation Voltage Control
• Equalize Charge Timer
• Wide operating temperature range
• Remote monitoring and control

Basic Specifications

• AC Input: 90~275 Vac(Single Phase)
• System Max. Capacity: -48V/50A~300A
• Operating Temp.: -0' C ~ +55' C
• AC Distribution Mains MCB double pole Separate breaker for each Module
• DC Distribution(Customized) Load distribution (With Critical & non critical load configuration) Battery distribution (Fuse/ Breaker)

• Outdoor Power System from IP 43 to IP 56
• Operational temperature range -10 ‘C to 50 ‘C ambient
• Thermal management is with Fan cooling system
• Humidity management is from 20% - 95% at 35'C
• Single wall Cabinet design with a ll outer panels and doors are made from 1.6mm thick CRCA/GI sheet with 2 mm load barring pillars.
• Space for telecom or datacom equipment 19" mountable arrangement
• Dust management by Filtration of dust particles with Metal/Propylene filter and organized opening
• Protection against Vandalism including t hree point lock
• Latest Coating technology by pretreatment (Phosphating) and pure polyester powder coating, which maximizes long corrosion free life
• EMI/RFI shielding gasket with water and dust sealing capability
• Intelligent alarming system:
  
  • Open Door Sensor
  • Lamp controlled by open door sensor
  • Smoke Detector (optional)
  • FAN ON/OFF control with remote alarm on fan failure
• AC Distribution Panel integrated: circuit breakers for general AC mains input, rectifiers AC input and auxiliary AC outlet
• Lightning protection integrated
•   Low Voltage Disconnection (LVD)
• Batteries cabinet integrated with recipient to collect Battery's electrolyte in case of damage .
• supply up to 10000W/18000 Watt

Features

• A.C. Single phase/ Three phase supply
• Complete Power plant in 19” mountable cabinet Including Rectifier, Battery Disconnect and Alarm Unit
• Hot Swappable 2000 Watt rectifiers
• All Modules are front accessible
• High power density in N+1 configuration
• System dimension is (H x W x D)310x450x700 mm
• A.C. voltage monitoring and cutoff in unbalance Condition
• Class-C level surge protection
• Battery Disconnect Breaker
• Low Voltage Disconnect( Battery deep discharge protection)
• Temperature Compensation Voltage Control
• Equalize Charge Timer
• Wide operating temperature range
• Remote monitoring and control

Basic Specifications

• AC Input: 90~275 Vac(Single Phase)
• System Max. Capacity: -48V/42A~168A - Operating Temp.: -20' C ~ +70' C
• AC Distribution
  Mains MCB double pole
  Separate breaker for each Module
• DC Distribution(Customized)
  Load distribution (With Critical & non critical load configuration)
  Battery distribution (Fuse/ Breaker)

• 25 A rectifier based power system is 100% compliant with TEC-GR no. GR/SMP-01/05.JAN’2005     including BHM(Battery Health Monitoring)
• 50A rectifier based power system is 100% compliant with TEC-GR no. GR/SMP-01/05.JAN’2005     including BHM(Battery Health Monitoring)
• 100A rectifier based power system is 100% compliant with TEC-GR no. GR/SMP-01/05.JAN’2005     including BHM(Battery Health Monitoring)