Laboratory Glassware

Inside of the through two z- shaped stirrers rotate towards each other at different speed. The special shape of the stirrers and the speed differential at which they operate shorten substantially the required mixing time. Stirrers and trough are made of stainless steel. The unit had a capacity of 3 to 4 kg. The through can be delivered with a double jacket for colling or heating with water. The trough is clossed with cover made of acrylic so that the kheading operation can be watched. The trough can be tiltedfor emptying or cleaning.

Technical Data:

The universal gearing is a basic requirement for our different attachment like the Coating Pan, Polishing Drum, Pelletizer, Cube Mixer, etc. The Universal Gearing required when the operating angles for the above attachments have to be changed. The unit offers an adjustment of the angle of operation from 0 to 75 degrees.

Technical Data:

Our Horizontal Main Drive & it features a 1 HP, 230 V, 50 Hz, Single Phase and A.C DRIVE. The drive is a very efficient gearbox & it operates in an oil bath. The speed is variable and can be varied between 0 to 400 RPM. This is done via an electronic speed controller and the corresponding rpm is displayed digitally. The drive also includes a timer in order to set time-based operations. All our Multi-Attachments can be easily mounted and dismounted on the drive with the help of two quick locking and unlocking knobs.

Technical Data:

The coating pan is used to produce uniform coating on tablets. This can be used with the universal Gearing and as a result different tilting angle can be set up to 45 Degree. It is also permits speed control at any desired RPM. For drying the coated tablets an infrared radiator is provided at an extra cost.

For Drying Tablets provided with Infra-red Drying Attachment.

Technical Data:

This is a Horizontal Drive & it features a 1 HP, 220 V D.C Drive. The drive is a very efficient gearbox & it operates in an oil bath. The speed is variable and can be varied between 0 to 420 RPM. This is done via an electronic speed controller and the corresponding rpm is displayed digitally. The drive also includes a timer in order to set time-based operations. All our Multi-Attachments can be easily mounted and dismounted on the drive with the help of two quick locking and unlocking knobs.

Technical Data