Our range of steep angle belt conveyor is an effective bulk handling equipment based on bucket belt type technology. Suitable for handling a variety of materials, this belt conveyor consists of Tail pulley, Head pulley, press rolls and Snub pulley. These parts effectively drive the conveyor and carry the materials through idler, Impact idlers and carrying stub rollers. The entire components are supported by rigid and rugged structures. The drive, generally mounted on head pulley, consist of Gearbox, motor, Couplings and hold back. Some of the features of these steep angle belt conveyors are:

• Economical and practical
• Effective for lifting bulk material
• Applicable for short distance to a height of 100 meters
• The maximum inclination of 90 degree is possible without any spillage
• Travel horizontally at discharge point and receiving point
• The available width is 400 mm to 1200 mm
• Capacity is 5 ton/hr to 300 ton/hr with a speed of 1.5mtr per sec

We offer a wide range of belt conveyor, which is used as effective bulk material handling equipment. It effectively used for handling variety of bulk materials. Our range of belt conveyors systems come with arrangement to convey bulk materials as well as to weight sort (magnetically). These belt conveyors consist Head pulley, Tail pulley, Snub Pulley, Take-up pulley and Bend pulley for driving and tensioning of the conveyor. Carrying of the load is done trough Idler Impact idler, Return Roller and Transition Idler. Some of the features of our belt conveyors are:

• Economical and practical
• Effective to use bulk material transporting over long distance
• Effective for those places that require wide range of paths to travel
• Durable, dependable and low cost operation
• Belt width range is 300 mm to 2000 mm
• Capacity is from 5 ton per hour to 1500 ton per hour

We offer a wide range of Bucket Elevator, which is used to carry bulk raw materials and grams where continuous material flow is required. These vertical bucket conveyors are especially used where high capacities of materials are to be handled but the floor plan or site space is limited. We offer a wide range of bucket elevator effective to handle free flowing bulk raw materials and grains with a normal lifts ranges up to 50 mts.

Our bucket elevators are divided into two classifications namely Centrifugal Bucket Elevator and Continuous Bucket Elevator. These buckets are mounted on chain or Belt as per the requirement. The bucket elevator comprises of components like head pulley with drive arrangement, tail pulley with take-up arrangement feed chute and discharge chute. The body of elevator is made up of cold rolled sheets and buckets are coated for longer life. The bucket elevator has capacity ranging from 3 ton/hr to 100 ton/hr.

We offer screw conveyor, which is a bulk material handling device capable in handling a wide range of materials. One of the noticeable advantages of these screw conveyors is the number of feed inlets and discharge openings that are provided with it. This facilitates the screw conveyor to received and distribute material for plant storage to various locations. The main application include

• Gram storage
• Feed mills
• Cereal processing
• Chemical plants

These conveyors are also adapted for volume control and are attached to the bottom of bins, hoppers, bag dumps, storage piles and other. These unit regulate the flow of material to the downstream equipment. Screw conveyor also allows the heating and cooling of materials while in transit. The available capacity ranges from 1 ton/hr to 50 ton/hr

These vibratory feeders can be used for dosing, batching, mixing and a variety of other applications. The electromechanical feeder is ideal as a discharge feeder, or for conveying dry bulk material in the processing stage. Materials such as powder, plastic pellet, dry chemicals, glass cullet, coal, metals, ore, minerals, aluminum, mining and aggregates, grains, seeds, pharmaceutical products, dry detergents, ceramic, textiles, rubber, fibers, feed, wood chips, salt, sugar and much more can be conveyed by our vibratory feeders. Any processing plant where dry bulk material is handled would benefit by learning more about our vibratory feeders. We make equipment especially for use in applications in the following industries: Steel, Glass, Foundry, Concrete, Chemical, Recycling, Pharmaceutical, Medicines, Bakery, Railroad Unloading, Plastics, Mining Power, Food Processing etc .

We offer Vibrating Screen in various sizes, which is widely used equipment in various industries. The vibrating screen is offered from single deck to multi deck type. Widely used for flowing materials like Coal, Iron Ore, Lime Stone, etc., and can be screened from 2mm to the higher sizes.

Mounted on helical springs on four ends and driven by unbalanced motor, the motors are totally dust sealed and provided with unbalanced weight for vibration. The inclination angle can be adjusted as per requirement. Our range is Available in capacity of 1 ton/hr to 200 ton/hr capacity.

We offer Rack & Pinion Gate in a wide range of specifications used as hopper gates. We also have capability to provide customization to our entire range as per the client's requirements.

We manufacture and supply a wide range of Conveyor Idlers, which is used to hold the a wide range of material. The main features of our range of products:

• Light and rigid frame construction
• Complete accuracy
• Sealing arrangement consist of a double seal
• Additional water proofing neoprene contact lip seal
• General diameter of roller pipes ranges from 76mm to 152mm
• Distance between each idler frames ranges from 900mm to 1500mm
• Roller distance are generally fixed at 1 mts to 1.5 mts Gap
• Bet Width ranges from 300mm to 2000mm
• Idler Bracket is fabricated from Mild Steel

We offer Conveyor Pulleys, which are used as a component of belt conveyors. Available in various specifications, we also have facility to provide customization to our entire range of Conveyor Pulleys.

We offer a wide range of Pneumatic Operated Gates, which is a component of belt conveyors.

This is made of steel, and basically it’s used for induction furnace feeding purpose in all steel melting plants .The maximum capacity of the furnace available is till 15 tonne. Its use is in high demand.

We also undertake turnkey projects on bulk raw material handling system, which can be applicable for various industries including industrial furnaces, coal handling, steel plants, etc.

3D Modelling

we have recently installed Solid works cosmos 3D modelling software, wherein we can make virtual 3D drawing of equipment, generate Load analysis and put motion to the equipment. we can take-up all such projects involving this type of work on contract basis.