Dutron Flex Pipes & Hoses

Sizes : G 204 TO 755 Application : Use with SWA, plastic and rubber sheathed cables Use : Dry indoor application for armored cable Material : Brass and Nickel plated

20mm to 160mm

20mm to 140mm

Size : 63 to 110 mm

Use > To inhale and exhale indoor and outdoor air > To suck in dust > To transpire poisonous gases Feature > Light and excellent flexibility > Good durability against poisonous gases and chemicals > Easy to handle and install

Applications > Concrete Wiring. > Underground Cable Laying. > Protection pipe for Cross - Linked Polyethylene pipe. Feature > Easy to handle and install. > Good flexibility and high pliability. > Excellent Resistance against : > Abrasion > Chemical and other corrosive elements > Under cold weather > Deformation > Excellent insulation > Easy to cut > Protection pipe for Cross - Linked Polyethylene pipe.

PBC water stop with solid circular bulb either side, used where large movement due to expansion / contraction is expected, also for settlement joints and crumple section.

A multipurpose, general type of PVC water stop having ribs on surface to ensure water tightness, used for expansion/contraction joints also for construction joints.

Dutron offers a wide range of 3 and 4-strand hawser laid ropes for a variety of applications such as Fishing, Shipping, Ports, Shipbuilding Yards, Stevedoring, Defense, Material Handling, Construction, Electricity Boards and various other Industrial Applications. Garfil 3 strand ropes are made from > High Density Poly Ethylene Monofilament yarn (HDPE) > Poly Propylene Split Film / Parapro Tape > Poly Propylene Mono & Multi Filament (PPMF) > Polyester Multi Filament Yarn > Polyamide (Nylon) > Poly Propylene / Polyester Combination Ropes Product Characteristics > Excellent strength and flexibility. > High abrasion resistance. > Unaffected by acids and alkalis > Excellent shock absorption capacity.

Wash Basin  Type 1

Advantages : > Operational life more than 50 years. > Suitable to use up to 95oC. > 100% leakage free joints. > Corrosion free & low noise system. > UV Stabilized. > Lower thermal conductive. > Food Grade. > Homogeneous joint best resistart against earth quake. > Light in weight and easy in installation. > Best in chemical processing.water treatment plant and > other industrial application.

444 - 1987 Application : For transfer of Water from place of source to place of use. Used in Agriculture. Mines, Fire Fighting etc. Construction Tube : Natural Rubber or Blend of Natural & Synthetic Rubber. Reinforcement Cover : High Strength Synthetic Yarn or Woven Fabric Suitable Rubber Compound weather & Abrasion Resistant Rubber. Temp. Range : -31F to 158F. Finish : Plain / Wrapped Finish.

HDPE Pipes have been used for piping system in various industries primarily because of its excellent resistance to cursive chemicals, its inherent toughness and ease of installation. HDPE pipe is definitely not substitute for conventional pipes but it is actually superior type product for many applications. The superiority of HDPE pipes are especially proven in the following properties > Economical than traditional pipe material. > Resistance to chemicals-exceptional resistance to all external and internal cormorants. > Resistance to electrolytic corrosion. > Will not rush or rot. > Welded joints speed installation. Trench widths can be reduced which leads to saving in the cost of excavation and back filling. > Light Weight - One sixth of the weight of steel. Low specific gravity giving an outstanding light weight product for easy transportation, handling, fitting etc. > Very good thermal insulation due to low thermal conductivity. > Smooth bore provides less head loss. Flow resistance is approximately 30% less than that of conventional pipes, permitting the use of a smaller bore pipe for a given rate of flow. > Perfect stability for material obviates the risk of ageing. > Total neutrality of products conveyed. > Flame resistance classifying the materials as self extinguishing, according to test standard employed. > Low maintenance cost. > Easy to install. > Longer Life tahn G.I., M.S. Cement & Other Pipes. Flexible : DutronTM pipes have a high flexural impact strength which enable them to withstand momentary, higher pressure (caused by water hammer, etc..) than their rated capacity. The flexibility of the pipes also enables them to be laid without leveling trenches since they can. Durable : DutronTM pipes manufactured as per IS:4984:95 are designed for a working life of 50 years at 27oC and the rated pressure. They are designed for a stress of 50 kgf/cm2 which with a safety factor of 1.3, permits a working stress of 39.5 kgf/cm

> No Leakage > No Rusting > No Deposition > Light Weight > Easy & Fast Installation > High Tensile Strength > Longer Life > Overall Economy > Recommended from 200 to 1000 Feet Depth pipes Based on market demand of quality pipes for submersible & Jet pumps Dutron is now introducing Advantages : pipes Leak Proof Joints : Specially designed square threads & rubber gaskets totally eliminates the chances of leakage & hence joints are 100% leak proof. Hygienic : As uPVC is immune to galvanic or electrolytic corrosion neither the pipe affects in any way the water passing through it nor water affects the pipe & hence there is no possibility of any contamination. High Flow Rate : Mirror smooth inside surface & corrosion resistance property ensures high flow rates & thus brings an end to the problem of deposition normally experienced with G.I. Pipes. Also, it results in power saving. Light Weight : Being extremely light in weight, handling & installation becomes much easier. Longer Life : Dutron submersible pipes are manufactured from high quality PVC resin with latest state of the art technology maintaining very high quality standards and as these pipes are corrosion resistant and they last for life time. High Load Carrying Capacity : These pipes have very high load carrying capacity and are recommended up to 550 feet depth subject to total load carrying capacity. Overall Economy : As compared to G.I. pipes, Dutron submersible pipes are highly economical due to lesser material cost, transportation cost & longer life. Installation Procedure : Primarily ensure that rubber gaskets provided with pipes are fitted in groove of external square threads of pipes. Assemble the adapter with pump. Tighten one pipe to another with help of jerk/torque so that more than 50% of rubber seal gets into the internal threads of socket of adjacent pipe. It is recommended to use strap wrench for assembly to avoid damage to th

Sizes : PG 7 to PG 48 Application : To DIN 46320/46255 available with strain relief facility with round or hex intermediate sockets, long and short anti threads. Material : Brass and Nickel plated

Size : 63 to 110 mm