Supreme PVC Pipes
Supreme PVC Pipes
We have available with us a wide range of Conduit PVC Pipes, which is known for quality features, such as high tensile strength, durability and ease of installation. These are not only resistant to chemicals but are fireproof as well. Our pipes are used for irrigation purposes, rainwater disposal, bore well casings, ducting, drinking water transportation, drainage and sewerage disposal applications.
Supreme PPR Pipes
We offer our clients with PPR pipes which are made from high grade raw material. These PPR pipes are superior then conventional G.I., M.S pipes. These pipes are available in various thickness, sizes and other dimensional specifications. These pipes can take pressure higher to 20 kg/cm2 and more.
• Durable for hot, cold water, sea water and hard water
• Resistant to many chemicals
• Easy to weld
• Easy to fit
Supreme UPVC Pipes
Storage and Handling
Care should be exercised at all the times in handling of pipes to avoid damage to the pipe surface or to the pipe ends, which are prepared for joining.
uPVC pipes and fittings should ideally be stored in a well ventilated and shady area. However, when pipes need to be stored in the sun and to protect from UV rays, they should be covered in a way, which leaves the end of pipes open for air to pass through which will avoid heat accumulation.
Elastomeric rings, gaskets and all fittings should always be stored in the shed and the elastomeric rings should be fitted in the socket when the pipe is in the trench and ready for jointing.
Solvent cement and lubricant should always be stored in a cool and dry place.
Pipes should always be stored on a reasonable level and flat surface which is free from stones and sharp projection so that the pipe is supported throughout its length. Wooden battens with a minimum width of 75 mm (3 inches) whose centers are one meter apart should be used.
Larger diameter pipes of sufficient wall thickness should be kept at the bottom of stack or in lower bundles. Loose pipes should have side supports, which are not more than 1.5 meter apart. Pipes should not be stacked for more than 2.5 m high and pipes of different sizes should be stacked separately. Stacking of bundles of pipes is possible up to 3 meter height.
A six-month exposure to sunlight may change the colour of uPVC pipes, as colour stabilizers are not used, while manufacturing.
Flat-floored vehicles should be used for transportation. Care should be taken to ensure that the sockets in the bottom layer carry no load. Pipes and components should be unloaded from lorries by hand in order to avoid damage. In no case should pipes overhang the vehicle by more than 0.6 m.
Features & benefits:
Odourless and hygienic:
These pipes are most ideal for carrying drinking water as they do not subject to contamination.
High corrosion resistance:
Being immune to chemical, electrolytic and galvanic action, these pipes are free from corrosion.
High chemical resistance:
Pipes offer excellent resistance to acids, oxidizing agents, alkalis, oils and domestic effluents.
Pipes have mirror smooth inside surface and hence better flow characteristics in comparison to AC, CI and GI pipes.
Self extinguishing quality:
This eliminates need for fire resistant coatings.
Corrosion resistance property of the PVC pipes, eliminates the need for painting or coating.
As these pipes are free from weakness caused by scale formation, rusting, weathering and chemical action, they lasts for a life time.
Apart from superiority over conventional pipes, supreme PVC pipes are light in weight and hence they offer total economy in handling, transportation and installation.
For tecnical detail please see attached pdf:
Supreme CPVC Pipes
We offer clients an extensive array of CPVC pipes which is available in different sizes.These are odorless and hygienic pipes that are perfect for transporting potable drinking water as they do not subject to contamination. Resistance to rusting, chemical reactions and free from scale formation provides durability to CPVC pipes.
Supreme SWR Pipes
The SWR Drainage System is the result of Supreme's pioneering research. It was the first such uPVC system in India which successfully replaced conventional CI and AC products. This system enables fast and efficient removal of waste without blockage and leakage. Its high impact strength, chemical and corrosion resistance, long life and virtually zero maintenance explain why it continues to be the preferred brand of architects and builders every where.
Features and Benefits:
High quality standards and wide range
Pipes and fittings are available in 40mm to 160 mm. Pipes conforms to IS 13592:92 and fittings conforms to IS 14735:99 and are made to international standards. Unique click ring type fittings are most suitable to be used in combination with Type B pipes for high-rise buildings. The system consists of pipes and wide range of fittings with various traps, which makes the system complete in all respect and hence customer need not to depend on conventional system for any reason.
Stronger and Long Lasting
This system is highly resilient, tough and durable with high tensile strength and high impact strength. Moreover it is free from problems caused by scale formation, rusting, weathering and chemical action, and hence lasts for lifetime.
Excellent chemical and corrosion resistance
Being non-metallic, this system is completely free from corrosion and offers very good resistance to wide range of chemicals.
which eliminates the adverse effect of sunlight and weather and can therefore be safely used for outdoor installations.
Quick and convenient installation
Being extremely light in weight and provided with special rubber jointing technique, installation of this system becomes much easier.
Quick and efficient removal of waste without leakage
Superior flow characteristics are ensured by the mirror smooth, restriction free inner surface of pipes and fittings, thus the system is free from problems of clogging and drain choke-up. System is completely leak-proof and designed to maintain high standards of hygiene.
Adequate and easy access for cleaning and clearing obstructions.
Once installed Supreme S.W.R. drainage system needs no maintenance.
Supreme S.W.R. drainage system is more cost effective than any conventional drainage system.
Supreme HDPE Pipes
Supreme ASTM Pipes
These pipes are manufactured as per ASTM D 1785 standard and are available in SCH 40,80,and 120 pressure class. These pipes are generally used for plumbing, water supply and jet pumps. These pipes are not recommended to use with aqua gold fittings. ASTM threaded pipes are 30-40% cheaper to G.I. pipes and offer all the advantages of aqua gold pipes. The system is UV-stabilized. Dimensions and pressure ratings of these pipes are given in the following table.
Supreme Casing Pipes
These pipes are manufactured as per BIS standard and are available in deep blue colour. One end of the pipe is male threaded where as other end is female threaded socket. Threads are either V or trapezoid type and protection caps are provided on the threads to protect the threads in transit. Two types of pipes i.e. Shallow Well (C.S.) and Medium Well (C.M.) are available. Shallow Well pipes can be used for depths upto 80 meters and Medium Well pipes can be used upto 250 meters.
To,Dinesh Sanitary Store, Sahibabad