Dinesh Scientific.

Air Compressor Test Rig Double

Air Compressor

Centrifugal Blower

We offers Centrifugal Pump (DC Drive Variable Speed Test Rig)

Centrifugal Pump

Set up consists of a centrifugal pump coupled with electrical motor, supply tank,measuring tank & pipe fittings for closed loop water circulation. Pressure and Vacuum gauges are connected on delivery and suction side of pump for the purpose of measurement. The flow rate of water is measured using measuring tank and stop watch provided.

EXPERIMENTS:

 

To determine overall efficiency and pump efficiency of

 

To plot Head vs. Discharge, Pump efficiency vs.

FEATURES:

 

• Closed loop water circulation
• 
  
• Compact & stand-alone set up
• 
  
• Stainless Steel tanks and wetted parts

 

• Superb Painted structure

• Simple to operate & maintain

 

UTILITIES REQUIRED:

Electric supply

Provide 230 +/- 10 VAC, 50 Hz, single

 

Earth voltage less than 5 VAC.) 5A, three pin socket with switch for pump.

 

Water supply

Tap water connection ½” BSP

TECHNICAL DETAILS:

Product Centrifugal Pump Test Rig

Pump

 

Drive

 

Supply Tank

 

Measuring Tank

 

Piping

 

Stop Watch

 

Control Panel

 

With required electrical instrumentation

Electronic

GI / PVC

Capacity 75 Ltrs. MOC SS fitted with Piezometer Tube & scale

Capacity 120 Ltrs. MOC SS

DC motor with DC drive along with non-contact type digital RPM indicator

Capacity 1 HP Speed 2800 RPM (max.), Head 12m(max.), Make Kirloskar

Set up consists of a centrifugal pump coupled with electrical motor,

supply tank, measuring tank & pipe fittings for closed loop water circulation. Pressure and Vacuum gauges

are connected on delivery and suction side of pump for the purpose of measurement. The flow rate of water

is measured using measuring tank and stop watch provided.

Experiments:

 

To determine overall efficiency and pump efficiency of

the centrifugal pump.

 

 

 

To plot Head vs. Discharge, Pump efficiency vs.

Discharge

 

 

Features:

 

Closed loop water circulation

 

 

Compact & stand-alone set up

 

 

Stainless Steel tanks and wetted parts

 

 

Superb Painted structure

 

Simple to operate & maintain

 

utilities required:

 

Electric supply

Provide 230 +/- 10 VAC, 50 Hz, single

phase

electric supply with proper earthing.

(Neutral

 

 

–

Earth voltage less than 5 VAC.) 5A, three pin socket with switch for pump.

 

Water supply

Tap water connection ½” BSP

 

technical details:

Product Centrifugal Pump Test Rig

Pump

 

Drive

 

Supply Tank

 

Measuring Tank

 

Piping

 

Stop Watch

 

Control Panel

 

With required electrical instrumentation

Electronic

GI / PVC

Capacity 75 Ltrs. MOC SS fitted with Piezometer Tube & scale

Capacity 120 Ltrs. MOC SS

DC motor with DC drive along with non-contact type digital RPM indicator

Capacity 1 HP Speed 2800 RPM (max.), Head 12m(max.), Make Kirloskar

Centrifugal Pump Test

Francis Turbine

The present set-up consists of a runner. The water is fed to the turbine by Means of

Centrifugal Pump, radially to the runner. The runner is directly mounted on one end of a central

SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is

provided with a transparent acrylic sheet for observation of

flow on to the runner. Load is applied to the turbine with the

help of brake arrangement so that the efficiency of the turbine

can be calculated. A draft tube is fitted on the outlet of the

turbine. The set-up is complete with guide mechanism. Pressure

and Vacuum gauges are fitted at the inlet and outlet of the

turbine to measure the total supply head on the turbine.

EXPERIMENTS:

Ø To study the operation of a Francis Turbine

Ø To determine the Output Power of Francis Turbine

Ø To determine the Turbine Efficiency

UTILITIES REQUIRED:

Ø Water Supply and Drain

Ø Electricity 15kW, 440 V AC, Three Phase

Ø Floor Area 1.5x 0.75 m

TECHNICAL DETAILS:

MODEL Mod-3 Mod-2 Mod-1

Output Power 5 HP 2 HP 1HP

Discharge 2600 LPM (Approx.) 1500 LPM (Approx.) 1200 LPM (Approx.)

Supply Head 18m 12m 10m

Rope Brake type

Dynamometer

Dia 300 mm. Dia 200 mm. Dia 200 mm.

Sump Tank Capacity 450 Ltrs. Capacity 290 Ltrs. Capacity 250 Ltrs.

Water Circulation Centrifugal

Pump

Capacity 15 HP Three

Phase.

Capacity 7.5 HP Three

Phase.

Capacity 5 HP Three

Phase.

Speed 1500 RPM (Approx.)

Runner Having Curved Vanes

Discharge Measurement Pitot Tube with Manometer.

Control Panel Mains Indicator

With Digital Tachometer Tanks will be made of Stainless Steel

The present set-up consists of a runner. The water is fed to the turbine by Means of

Centrifugal Pump, radially to the runner. The runner is directly mounted on one end of a central

SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is

provided with a transparent acrylic sheet for observation of

flow on to the runner. Load is applied to the turbine with the

help of brake arrangement so that the efficiency of the turbine

can be calculated. A draft tube is fitted on the outlet of the

turbine. The set-up is complete with guide mechanism. Pressure

and Vacuum gauges are fitted at the inlet and outlet of the

turbine to measure the total supply head on the turbine.

Experiments:

 

To study the operation of a Francis Turbine

 

 

To determine the Output Power of Francis Turbine

 

 

To determine the Turbine Efficiency

 

utilities required:

 

Water Supply and Drain

 

 

Electricity 15kW, 440 V AC, Three Phase

 

 

Floor Area 1.5x 0.75 m

 

Technical Details:

MODEL Mod-3 Mod-2 Mod-1

Output Power

 

Discharge

 

Supply Head

 

Rope Brake type

Dynamometer

Dia 300 mm. Dia 200 mm. Dia 200 mm.

Sump Tank

 

Water Circulation Centrifugal

Pump

Capacity 15 HP Three

Phase.

Capacity 7.5 HP Three

Phase.

Capacity 5 HP Three

Phase.

Speed

 

Runner

 

Discharge Measurement

 

Control Panel

 

With Digital Tachometer

 

Tanks will be made of Stainless Steel

Mains Indicator

Pitot Tube with Manometer.

Having Curved Vanes

1500 RPM (Approx.)

Capacity 450 Ltrs. Capacity 290 Ltrs. Capacity 250 Ltrs.

18m 12m 10m

2600 LPM (Approx.) 1500 LPM (Approx.) 1200 LPM (Approx.)

5 HP 2 HP 1HP

Set up consists of a gear pump having a pair of meshed gears coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop oil circulation. Pressure and Vacuum gauges are connected on delivery and suction side of pump for the purpose of measurement. The flow rate of water is measured using measuring tank and stop watch provided.

EXPERIMENTS:

 

To determine overall efficiency and pump efficiency of the

 

To plot Head vs. Discharge, Pump efficiency vs. Discharge

 

FEATURES:

• Closed loop circulation
• Compact & stand-alone set up
• Stainless Steel tanks and wetted parts
• Superb Painted structure

• Simple to operate & maintain

UTILITIES REQUIRED:

Electric supply

Provide 230 +/- 10 VAC, 50 Hz, single phase

 

Earth voltage

 

Oil supply

Oil @ 30 liters

 

TECHNICAL DETAILS:

Product Gear Pump Test Rig

Pump

 

Drive

 

Supply Tank

 

Measuring

Tank

Capacity 20 Ltrs. MOC SS fitted with Piezometer Tube & scale

Piping

 

Stop Watch

 

Control Panel

 

With required electrical instrumentation

Electronic

GI / PVC

Capacity 30 Ltrs. MOC SS

DC motor with DC drive along with non-contact type digital RPM indicator

Gear pump with pair of meshed gears Capacity 1 HP , Speed 1500 RPM (max.), Head 5

Set up consists of a gear pump having a pair of meshed gears coupled

with electrical motor, supply tank, measuring tank & pipe fittings for

closed loop oil circulation. Pressure and Vacuum gauges are connected on delivery and suction side of pump

for the purpose of measurement. The flow rate of water is measured using measuring tank and stop watch

provided.

Experiments:

 

To determine overall efficiency and pump efficiency of the

gear pump.

 

 

 

To plot Head vs. Discharge, Pump efficiency vs. Discharge

 

Features:

 

Closed loop circulation

 

 

Compact & stand-alone set up

 

Stainless Steel tanks and wetted parts

 

 

Superb Painted structure

 

 

Simple to operate & maintain

 

Utilities Required:

 

Electric supply

Provide 230 +/- 10 VAC, 50 Hz, single phase

electric supply with proper earthing. (Neutral

 

 

–

Earth voltage

less than 5 VAC.) 5A, three pin socket with switch for pump.

 

 

 

Oil supply

Oil @ 30 liters

 

Technical Details:

Product Gear Pump Test Rig

Pump

 

Drive

 

Supply Tank

 

Measuring

Tank

Capacity 20 Ltrs. MOC SS fitted with Piezometer Tube & scale

Piping

 

Stop Watch

 

Control Panel

 

With required electrical instrumentation

Electronic

GI / PVC

Capacity 30 Ltrs. MOC SS

DC motor with DC drive along with non-contact type digital RPM indicator

Gear pump with pair of meshed gears Capacity 1 HP , Speed 1500 RPM (max.), Head 5

kg/cm2 (max.)

Gear Pum

Hydraulic Ram

Apparatus consists of a close circuit through which water is circulated continuously by means of a centrifugal pump of 25 mm x 25 mm with 0.5 H.P. motor to make the supply from sump tank. A sump tank 125 cm long, 80 cm wide and 40 cm high fabricated on M.S. angle frame with 3 mm thick M.S. sheet is provided. Inside of the tank is lined with FRP. A drain valve of 15 mm size is provided in the bottom of the tank.

A supply tank 50 cm x 50 cm and 100 cm high fabricated with S.S. sheet with over flow arrangement, gauge glass tube and 15 mm size drain valve is provided. Inside of the tank is lined with FRP. The tank has the provision for fixing the supply pipe of 50 mm dia of which other end is connected to the ram. The tank is supported on a stand fabricated from M.S. angle. For the supply head of 2.5 m, the discharge head of the ram will be 15 m (approx.) the discharge will be 360 LPH.

A pressure gauge is provided with a regulating valve on the delivery side of the ram (delivery pipe is of 15 mm dia) so that much greater head of water can be observed and obtained by the adjustment of the shifting valve provided in the ram assembly. Lifted water can be collected by the help of a collecting tank of 30 cm x 30 cm and 30 cm high. The tank is provided withgauge glass tube, flow diverting arrangement and a drain valve of 25 mm size.

Waste water can be measured by the help of another collecting tank. The tank is provided with gauge glass tube, flow diverting arrangement and a drain valve of 15 mm size. Necessary G.I. piping system & flexible pipe of suitable size, necessary fitting and control valve are provided with the apparatus.

EXPERIMENTS:

To determine the efficiency of ram.

 

FEATURES:

• Compact & stand-alone set up
• Stainless Steel tanks and wetted parts
• Superb Painted structure
• Simple to operate & maintain

 

Apparatus consists of a close circuit through which water is circulated

continuously by means of a centrifugal pump of 25 mm x 25 mm with

0.5 H.P. motor to make the supply from sump tank. A

sump tank 125 cm long, 80 cm wide and 40 cm high

fabricated on M.S. angle frame with 3 mm thick M.S.

sheet is provided. Inside of the tank is lined with FRP. A

drain valve of 15 mm size is provided in the bottom of

the tank.

A supply tank 50 cm x 50 cm and 100 cm high fabricated

with S.S. sheet with over flow arrangement, gauge glass

tube and 15 mm size drain valve is provided. Inside of

the tank is lined with FRP. The tank has the provision for

fixing the supply pipe of 50 mm dia of which other end is

connected to the ram. The tank is supported on a stand

fabricated from M.S. angle.

For the supply head of 2.5 m, the discharge head of the

ram will be 15 m (approx.) the discharge will be 360 LPH.

A pressure gauge is provided with a regulating valve on

the delivery side of the ram (delivery pipe is of 15 mm dia) so that much greater head of water can be

observed and obtained by the adjustment of the shifting valve provided in the ram assembly. Lifted water

can be collected by the help of a collecting tank of 30 cm x 30 cm and 30 cm high. The tank is provided with

gauge glass tube, flow diverting arrangement and a drain valve of 25 mm size.

Waste water can be measured by the help of another collecting tank. The tank is provided with gauge glass

tube, flow diverting arrangement and a drain valve of 15 mm size.

Necessary G.I. piping system & flexible pipe of suitable size, necessary fitting and control valve are provided

with the apparatus.

Experiments:

 

To determine the efficiency of ram.

 

Features:

 

Compact & stand-alone set up

 

Stainless Steel tanks and wetted parts

 

 

Superb Painted structure

 

 

Simple to operate & maintain

Jet Pump

Kaplan Turbine

The present set-up consists of a scroll casing housing a runner. Water enters the turbine

through the stationary guide vanes and passes through the runner axially. The runner has a

hub and airfoil vanes, which are mounted on it. The water is fed to the turbine by means of Centrifugal

Pump. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake

arrangement. A transparent hollow cylinder made of acrylic is fitted in between the draft tube and the

casing for observation of flow. Load is applied to the turbine with the help of rope brake arrangement so

that the efficiency of the turbine can be calculated. The set-up is

supplied with control panel. A draft tube is fitted on the outlet of

the turbine. The set-up is complete with guide mechanism.

Pressure and Vacuum gauges are fitted at the inlet and outlet of

the turbine to measure the total supply head on the turbine.

EXPERIMENTS:

Ø To study the operation of Kaplan turbine.

Ø To determine the Output Power of Kaplan Turbine.

Ø To determine the turbine efficiency

UTILITIES REQUIRED:

Ø Electricity 3 kW, 220V AC, Single Phase

Ø Floor Area 1.5 x 0.75 m

Ø Tachometer

TECHNICAL DETAILS:

MODEL Mod-3 Mod-2 Mod-1

Output Power 3 HP 2 HP 1 HP

Discharge 5000 LPM (Approx.) 4000 LPM (Approx.) 3500 LPM (Approx.)

Supply Head 8 m 6 m 5 m

Rope Brake type

Dynamometer

Dia 300 mm. Dia 200 mm. Dia 200 mm.

Sump Tank Capacity 600 Ltrs. Capacity 460 Ltrs. Capacity 400 Ltrs.

Water Circulation Centrifugal

Pump

Capacity 15 HP Three

Phase.

Capacity 10 HP Three

Phase.

Capacity 7.5 HP Three

Phase.

Speed 1500 RPM (Approx.)

Runner with adjustable curved vanes

Discharge Measurement Pitot Tube with Manometer.

Control Panel Starter, Mains Indicator

With Digital Tachometer Tanks will be made of Stainless Steel

The present set-up consists of a scroll casing housing a runner. Water enters the turbine

through the stationary guide vanes and passes through the runner axially. The runner has a

hub and airfoil vanes, which are mounted on it. The water is fed to the turbine by means of Centrifugal

Pump. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake

arrangement. A transparent hollow cylinder made of acrylic is fitted in between the draft tube and the

casing for observation of flow. Load is applied to the turbine with the help of rope brake arrangement so

that the efficiency of the turbine can be calculated. The set-up is

supplied with control panel. A draft tube is fitted on the outlet of

the turbine. The set-up is complete with guide mechanism.

Pressure and Vacuum gauges are fitted at the inlet and outlet of

the turbine to measure the total supply head on the turbine.

Experiments:

 

To study the operation of Kaplan turbine.

 

 

To determine the Output Power of Kaplan Turbine.

 

To determine the turbine efficiency

 

Utilities Required:

 

Electricity 3 kW, 220V AC, Single Phase

 

 

Floor Area 1.5 x 0.75 m

 

 

Tachometer

 

Technical Details:

MODEL Mod-3 Mod-2 Mod-1

Output Power

 

Discharge

 

Supply Head

 

Rope Brake type

Dynamometer

Dia 300 mm. Dia 200 mm. Dia 200 mm.

Sump Tank

 

Water Circulation Centrifugal

Pump

Capacity 15 HP Three

Phase.

Capacity 10 HP Three

Phase.

Capacity 7.5 HP Three

Phase.

Speed

 

Runner

 

Discharge Measurement

 

Control Panel

 

With Digital Tachometer Tanks will be made of Stainless Steel

Starter, Mains Indicator

Pitot Tube with Manometer.

with adjustable curved vanes

1500 RPM (Approx.)

Capacity 600 Ltrs. Capacity 460 Ltrs. Capacity 400 Ltrs.

8 m 6 m 5 m

5000 LPM (Approx.) 4000 LPM (Approx.) 3500 LPM (Approx.)

3 HP 2 HP 1 HP

The present set-up consists of a runner. The buckets are mounted on the runner.

The water is fed to the turbine, through SS nozzle with a SS spear, by means of Centrifugal Pump,

tangentially to the runner. Row of water into turbine is regulated by adjusting the spear position by the help

of a given hand wheel The runner is directly mounted on one end of a central SS shaft and other end is

connected to a brake arrangement. The circular window of the turbine casing is provided with a transparent

acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid MS

structure. Load is applied to the turbine with the help of this brake dynamometer so that the efficienc y of

the turbine can be calculated. Pressure gauge is fitted at the inlet of

the turbine to measure the total supply head to the turbine.

EXPERIMENTS:

Ø To study the operation of a Pelton Wheel Turbine

Ø To determine the Output Power of Pelton Wheel Turbine

Ø To determine the Turbine Efficiency

UTILITIES REQUIRED:

Ø Water Supply and Drain

Ø Electricity 15 kW, 440V AC, Three Phase

Ø Floor Area 1.5 x 0.75 m

TECHNICAL DETAILS:

Model Mod-3 Mod-2 Mod-1

Output Power 5 HP 2 HP 1 HP

Discharge 960 LPM (Approx.) 600 LPM(Approx.) 500 LPM(Approx.)

Supply Head 44 m 30 m 25 m

Rope Brake Dynamometer Dia 300 mm. Dia 200 mm. Dia 200 mm.

Sump Tank Capacity 370 Ltrs Capacity 220 Ltrs Capacity 200 Ltrs

Water Circulation Centrifugal

Pump

Capacity 15HP, Three

Phase

Capacity 7.5 HP, Three

Phase

Capacity 5HP, Three

Phase

Speed 1000 RPM (Approx.)

Impeller Material Brass, Bucket type

Nozzle Material Stainless Steel

Spear Material Stainless Steel

Discharge Measurement Pitot Tube with Manometer

Control Panel Starter, Mains Indicator

With Digital Tachometer

Tanks will be made of Stainless Steel

Pelton turbine test rig the present set-up consists of a runner. The buckets are mounted on the runner. The water is fed to the turbine, through SS nozzle with a SS spear, by means of centrifugal pump, tangentially to the runner. Row of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel the runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid MS structure. Load is applied to the turbine with the help of this brake dynamometer so that the efficiency of the turbine can be calculated. Pressure gauge is fitted at the inlet of the turbine to measure the total supply head to the turbine. Experiments: To study the operation of a pelton wheel turbine To determine the output power of pelton wheel turbine. To determine the turbine efficiency utilities required:  Water supply and drain Electricity 15 kw, 440v ac, three phase Floor area 1. 5 x 0. 75 m. Technical details: model mod-3 mod-2 mod-1output power 5 hp 2 hp 1 hp discharge 960 lpm (approx. ) 600 lpm(approx. ) 500 lpm(approx. )supply head 44 m 30 m 25 mrope brake dyna mometer dia 300 mm. Dia 200 mm. Dia 200 mm. Sump tank capacity 370 ltrs capacity 220 ltrs capacity 200 ltrs water circulation centrifugal pump capacity 15hp, three-phase 7. 5 hp, three phase capacity 5hp, three phase speed 1000 rpm (approx. )impeller material brass, bucket type nozzle material stainless steel spear material stainleel starter, mains indicatorwith digital tacho meter tss steel discharge measurement pitot tube with mano meter control pananks will be made of stainless steel.

The present set-up consists of a runner. The buckets are mounted on the runner.

The water is fed to the turbine, through SS nozzle with a SS spear, by means of Centrifugal Pump, tangentially to the runner. Row of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid MS structure. Load is applied to the turbine with the help of this brake dynamometer so that the efficienc y of the turbine can be calculated. Pressure gauge is fitted at the inlet of the turbine to measure the total supply head to the turbine.

Experiments:

To study the operation of a Pelton Wheel Turbine

To determine the Output Power of Pelton Wheel Turbine

To determine the Turbine Efficiency

Utilities Required:

Water Supply and Drain

Electricity 15 kW, 440V AC, Three Phase

Floor Area 1.5 x 0.75 m

technical details:

Model Mod-3 Mod-2 Mod-1

Output Power

Discharge

Supply Head

Rope Brake Dynamometer

Sump Tank

Water Circulation Centrifugal

Pump

Capacity 15HP, Three

Phase

Capacity 7.5 HP, Three

Phase

Capacity 5HP, Three

Phase

Speed

Impeller

Nozzle

Spear

Discharge Measurement

Control Panel

With Digital Tachometer

Tanks will be made of Stainless Steel

Starter, Mains Indicator

Pitot Tube with Manometer

Material Stainless Steel

Material Stainless Steel

Material Brass, Bucket type

1000 RPM (Approx.)

Capacity 370 Ltrs Capacity 220 Ltrs Capacity 200 Ltrs

Dia 300 mm. Dia 200 mm. Dia 200 mm.

44 m 30 m 25 m

960 LPM (Approx.) 600 LPM(Approx.) 500 LPM(Approx.)

5 HP 2 HP 1 HP

We offer Pelton Wheel Turbine

Pelton Wheel

Reciprocating Pump

We offer Submersible Pump Test.

Apparatus consists of a close circuit through which water is circulated

continuously by means of a double acting reciprocating pump of 25 mm x 20 mm

coupled to a 1.0 H.P. capacity A.C. motor to make the supply from sump tank. Pump is provided with air

vessels. Max head of the pump is 5 Kg/cm

2

. A sump tank of 80 cm long, 40 cm wide and 30 cm high

fabricated S.S. sheet is provided with the apparatus. A drain valve of 15 mm size is provided in the bottom of

tank.

Discharge of water can be collected by the help of a collecting tank of 40 cm x 40 cm and 40 cm high Inside

of the tank is lined with FRP. The tank is provided with gauge glass tube, flow diverting arrangement and a

drain valve of 25 mm size.

Complete G.I. piping system with foot valve, vacuum gauge and pressure gauge (located at suitable places)

with necessary fittings are provided with the apparatus. A regulating valve is provided on the downstream

side of the circuit to regulate the flow.

 

 

Experiments:

To determine the efficiency of the pump.

 

Features:

Self contained water circulation unit.

 

Pump giving adequate flow for meaningful experiments.

 

Capacity of water - 90 lit. approx.

Electrical supply - Single phase, 1.0 H.P. Cap.

 

Comprehensive Instruction Manual covers experiment presented in the form of a full laboratory report.

 

Space saver as collecting tank is mounted over the sump tank.

 

The inside surface of the tank is provided with FRP to minimize the problem of corrosion.

 

Space requirement: Floor area 1.8 m x 1.0 m x 1.5 m approx.