We offer a wide range of FRP Pressure Vessel which are accepted all over the world for Water TrearmentFiltration, Softening, Demineralisation. DME-FRP Vessels comes with options of single/double, threaded/flanged openings. Vessels can also be customized for sight glass & hand holes for media removal.

  SALIENT FEATURES:

• Corrosion Resistant
• Light In Weight
• High Impact Strength
• Superior Outlook
• Easy to Handle & Install
• Maintenance Free

MODEL	SHELL VOLUME	OPENING
	(LTRS)
DM622	10	2.5"
DM632	15	2.5"
DM825	20	2.5"
DM836	30	2.5"
DM934	35	2.5"
DM938	40	2.5"
DM1035	45	2.5"
DM1040	50	2.5"
DM1044	60	2.5"
DM1240	75	2.5"
DM1346	100	4"
DM1450	125	4"
DM1646	150	4"
DM1653	175	4"
DM1848	200	4"
DM1854	225	4"
DM2048	250	4"
DM2058	300	4"
DM2448	350	4"
DM2458	430	4"
DM3052	600	4"
DM3060	700	4"
DM3960	1200	6"Flanged
DM4860	1700	6"Flanged

 

We offer an extreme range of reactors that are manufactured by using new generation thermoplastics such as PP, PVC, PVDF, ECTFE, PFA, PTFE along with FRP.
These Dual Laminate Reactors are now used in numerous chemical & pharmaceutical industries replacing exotic metals, alloys, glass & rubber lined reactors.

They are widely used in the following industries:

• Pharmaceuticals
• Chemical engineering
• Pulp & Paper Industry
• Fertilizer
• Metal Refining

We offer Reverse Osmosis plant that allows the flow of solvents from a level of higher concentration to a level of lower concentration through a semi permeable membrane.

These plants are widely used for removing dissolved salts, turbidity, asbestors, lead and other impurities from water.

At D.M.Engineering Co. We have acquired enough expertise to customize a treatment plant depending on customer's specific requirement.

Our meticulously designed pre-treatment & a unique approach to system design with high end software tools makes our UF, NF, RO Systems impeccable one.

Filtration is an indispensable process in any industry. At DM Engineering we offer varios Dead End Filtration equipments, which are made out of traditional metals as well as new generation composites (PP,PVC,PVDF,HDPE,FRP)

This type of filters has high filtration area. Element used is either a perforated basket with screening mesh or a bag/cartridge of specific degree of filtration. Washing/disposing/back washing can clean the basket/bag/cartridge when clogged.

These filters can be offered in manual as well as automatic mode with control circuit & automatic valves.

Simplex/Duplex option offer flexibility of operation viz.

• Continuos operation
• Batch operation

Filtration as fine as 1micron or lower is easily achievable with these inline filters.

Air handling equipments play a vital role in chemical, refining, pharmaceuticals & various industries where poisnous & Corrosive gases laden with vapours & particulates have to be handled.

Ours specialized knowledge of thermoplastic & thermoset materials with complete design know how has enabled us to manufacture most efficient, reliable & cost effective fume exhaust/ventillation system.

At D.M. Engineering Co. We offer blowers from 300CFM to 10,00,000CFM at various static heads.

At D.M. Engineering Co. We design, manufacture, install & commission entire gas scrubbing  system using anti corrosive material such as polypropylene, PVC, FRP and many more. They are widely used to scrub hazardous gases such as Acid fumes, CL2, SO2, NH3 , NOx and other alkali fumes.

These scrubbers are also available in various forms such as:

• Bubble Tray Absorber
• Packed beds
• Ventury
• Cyclones

We offer a wide range of ventury scrubber that is widely used in both application of particulate collection as well as pollution control equipment. We design these scrubber as per as international quality standard. With our ventury scrubbers efficiency of the order of  95% is easily achievable.

In our fight with corrosion & corrosion causing elements, we at D. M. Engineering Co. under our WWTP divisionoffer wide range of water treatment equipments

Our inhouse FRP vessel manufacturing facility & thorogh design knaow how of water chemistry makes our DM plants  an ideal choice for industry.

For TDS/hardness removal we offer equipments like Water softners, Demineralisation plants. Our mixed bed system gives ultrapure water of conductivity as low as 0.1 micorsiemens.
All units can be supplied in manual as well as fully auotamatic option.

Applications:

• Hospitals
• Shopping malls/complexes
• Chemical/phrmaceutical industries
• Power plants
• Boiler water treatment
• Public places like theatres
• Tertiary treatment for waste water plant

This is a natural media based filtration technology, which treats water or wastewater with turbidity, odour & colour. in this different layers of graded sand & pebbles are used for filtration.
In activated carbon filter surface area os anthracite is increased to many folds by special process. this helps to trap unwanted odour,colour & gases in water.

BOTH PSF(Pressure Sand Filter) & ACF (Activated Carbon Filter) are offered in manual  & automactic modes.

Applications:

• Industries(Textile,dying,chemical, pharmaceutical etc)
• Hospitals,
• Schools & Colleges
• Shopping malls
• Housing colonies
• theatres

Thorough knowledge of thermoplastics & thermosets with unmatched expertise in core engineering has always enabled D.M. Engineering Co. to offer most fitting solutions for static chemical holding & storage applications.

We at DME Engineering offer chemical storage tanks in composite material in dual laminate contruction.
Engineering Thermoplastic like PP, PPh, PVC, PVDF, HDPE, ECTFE, PFA, FEP etc serves as a liner for corrosion resistance while FRP with suitable binder matrix imparts straength.

All tanks are deisgned in compliance with international standards viz.BS4994,ASTM 4097D

Fabrication process follows strict quality assurance plan(QAP) with all raw material been tested in inhouse testing laboratory.

Name earnd through quality & service has enabled D.M. engineering to give many of firsts & biggests to indusrty till date.

Testitng facilities:
Spark tester
Hardness tester
Hydro tester
tensile testing machine

Software used: AutoCAD,PRO-E,Ansys,CFD

Storage tanks are highly reliable and are applicable in various industries such as:

• Chemical process industry
• Metal refining industry
• Pharmaceutical industry
• Food processing industry
• Pulp and paper industry
• Metal finishing industry
• Fertilizer industry

Static misxers are unique in a way wherematerial itself is moved though element blades as aginst blades thorugh material in dynamic mixers.
the elements move the material radially in & out while continuing to flow in axial direction, this unique causes division & union of flow at each element.

our static mixers has no moving parts to cause maintenance problems & they deliver exceptinally long worry free life.

After careful study & consideration of various process parameters such as viscosity, density,flow rate,pressure drop & desired CoV (Coefficient of variation- measure of degree of mixing) we design & fabricate static mixers by using software tools like CFD,ansys.

Sailent Features of DME Static Mixers:

• Highly efficient mixing
• Low energy consumption
• No moving parts for maintenance free operation
• No direct motive power required
• No need for tanks in most cases
• Ease of installation
• Minimal space requirement
• Totally enclosed pipe designs
• Optional injectors & smaple points
• Available in all sizes
• Available in a wide range of materials
• Custom design