We offer styrene monomer; this is a colorless oily liquid with an aromatic odor. The molecular formula of styrene monomer is C8H8 and has molecular weight of 104.15 g/mol. Styrene Monomer is most commonly used in the production of valuable styrene homopolymers and copolymers, which are either solid or expandable. It is also used in making polystyrene plastics, protective coatings, polyesters, resins, and as a chemical intermediate.

Specifications:-

• CAS Number: 100-42-5
• RTECS Number: WL3675000
• Molecular Formula: C8H8
• Molar Mass: 104.15 g/mol
• Appearance: colorless oily liquid
• Density: 0.909 g/cm³
• Melting Point: -30 °C (243.15 K)
• Boiling Point: 145 °C (418.15 K)
• Solubility in water: < 1%

The Acryl amide offered by us is a chemical compound with the chemical formula C3H5NO. This is a white odorless crystalline solid, and soluble in water, ethanol, ether and chloroform. Acryl amide is incompatible with acids, bases, oxidizing agents, iron and iron salts. These are basically used to separate charged molecules. It has many other uses in molecular biology laboratories, including the use of linear polyacrylamide as a carrier which aids in the precipitation of small amounts of DNA.

Specifications:

• CAS number: 79-06-1
• Molecular Formula: C3H5NO
• Molar mass: 71.08 g mol¿1
• Density: 1.13 g/cm³
• Melting Point: 84.5 °C
• Boiling Point: - (polymerization)
• Solubility in Water: 204 g/100 ml (25 °C)

Maleic Anhydride has many synonyms such as (Z)-butenedioic acid, cis-butenedioic acid, malenic acid, maleinic acid, and toxilic acid. This is an organic compound that is a dicarboxylic acid and has molecular formula C4H4O4. The molecule consists of an ethylene group flanked by two carboxylic acid groups. The maleate ion found in maleic acid is useful in biochemistry as an inhibitor of transaminase reactions. Further, we have been appreciated by our clients for its features such as pure and accurate formulation.

Specifications:

• CAS Number :[110-16-7]
• EC Number :203-742-5
• RTECS Number: OM9625000
• Molecular Formula: C4H4O4
• Molar Mass: 116.1 g/mol
• Appearance : white solid
• Density :1.59 g/cm³, solid
• Melting Point :131 - 139°C decomposes
• Boiling Point: 135 °C decomposes
• Solubility in Water: 78 g/100 ml (25 °C)

Emulsifiers are used to make two components such as water and oil compatible. It acts as an interface between the conflicting components and used as edible for preparing different foods. Chemically, an emulsifier is a molecule with one oil-friendly end and one water-friendly. The droplets of oil are surrounded by the emulsifier molecule, with the oil core hidden by the water-friendly tails of the emulsifier. A classic natural emulsion is milk, which is a complex mixture of fat suspended in an aqueous solution. Nature's emulsifiers are proteins and phospholipids. Egg is also commonly used as an emulsifier.

Our emulsifier is prepared by using palm oil, rapeseed oil, soy bean oil, sunflower oil or lard/tallow. We combine oil (triglyceride) with glycerol that results in monoglyceride for the production of emulsifier. The type of triglyceride used in the reaction determines the type of emulsifier obtained. Unsaturated triglycerides produce fluid products such as oil while saturated triglycerides result in pasty or solid structures like butter. Additionally, Monoglycerides can be combined with other substances, such as citric acid and lactic acid, in order to enhance their emulsifying properties.

We offer acid casein that is prepared by controlled acid precipitation from skim milk. This is a whitish creamy powder used in coffee whiteners, infant formulas, and processed cheese and for use in pharmaceutical industries. We also provide technical acid casein, which have good binding properties and are used for the manufacture of paper coatings, adhesives, paints, textile fabrics and cosmetics.

Specifications:

• Appearance: Whitish / Creamy Powder
• Texture: Fine
• Moisture: 8.30 % Max.
• Protein: % ODB 92.75 % Min.
• pH: (10% 2/v Solution) 4.60
• Fat Content: 2.25 % Max.
• Total Ash Content: 2.40 % Max.
• Total Acidity: (ml of 0.1N NaOH) 8.80 ml.
• Free Acidity As L.A.%: 0.149 ml.
• Total Minerals % as such: 1.71 % Max.

We provide industrial casein that is used across industry such as leather industry, chemical industry, paper making, emulsion industry, medicine industry and plant. These casein are also used as an additive for polishing, dyeing & coloring. Additionally, we have been appreciated by our clients for the purity of our casein as it has maximum 12.00 % moisture content and minimum 93.00 % of protein content.

Specification:

• Protein (on dry basis): min 93.00%
• Moisture: Max. 12.00%
• Fat: Max. 1.80%
• Ash: Max. 2.00%
• Acidity: max 45°T
• Viscosity: 1000-2500mPa.S

We offer quality ethyl acrylate that is an organic compound primarily used in the preparation of various polymers. It is a clear liquid with an acrid penetrating odor. This compound is registered with the CAS number 140-88-5 and its RTECS number is AT0700000. The Molecular formula of ethyl acrylate is C5H8O2 with the molecular mass 100.11. Ethyl acrylate is used in the production of polymers including resins, plastics, rubber, and denture material.

Specifications:

• CAS Number: 140-88-5
• RTECS Number: AT0700000
• Molecular Formula: C5H8O2
• Molar Mass: 100.11
• Appearance: Clear liquid
• Density: 0.9405 g/ml
• Melting Point: 71 °C
• Boiling Point: 99.4 °C
• Solubility in Water: Insoluble

Butyl acrylate offered by is known by many synonyms such as Butyl 2-propenoate, Acrylic acid n-butyl ester, n-Butyl acrylate, 2-Propenoic acid, butyl ester, Acrylic acid, and butyl ester. The molecular formula of this organic compound is CH2=CHCOO(CH2)3CH3 and is registered with the CAS number 141-32-2. It is a clear liquid and is used by adhesives manufactures as carpet resins and by impregnation agents for the coatings of non-woven binders. Known for its purity these are also demanded in various textile industries.

Specification:

• CAS No. 141-32-2
• Formula: CH2=CHCOO(CH2)3CH3
• Mol. Wt. 128.17
• Synonyms: Butyl 2-propenoate; Acrylic acid n-butyl ester; n-Butyl acrylate; 2-Propenoic acid, butyl ester; Acrylic acid, and butyl ester
• Physical State: Clear Liquid
• Melting Point: -65 C
• Boiling Point: 144 - 145 C
• Specific Gravity 0.89
• Solubility in Water: Slightly soluble
• NFPA Ratings:
• Health: 2
• Flammability: 2
• Instability: 2
• Flash Point 390C
• Stability: Polymerization will occur under light and heat

The metha acrylic acid offered by us is an organic compound and is abbreviated as MAA. This colorless, viscous liquid is a carboxylic acid with an acrid unpleasant odor. We produce metha acrylic acid as a precursor to its esters, especially methyl metha acrylate (MMA). It is soluble in warm water and miscible with most organic solvents. The metha acrylates have numerous uses, and is widely used for manufacturing polymers with trade names such as Lucite and Plexiglas.

Specifications:

• CAS No.: 96-33-3
• Methyl Acrylate Einecs No.: 202-500-6
• Formula: CH2=CHCOOCH3
• Mol. W    t.: 86.09
• Physical State: Clear Liquid
• Melting Point: -74 C
• Boiling Point: 79 - 81 C
• Specific Gravity: 0.953 - 0.958
• Solubility in Water: slightly soluble (52 g/l)

We offer quality and pure adipic acid that is the organic compound with the formula C6H10O4. It is the most important dicarboxylic acid used in various industries mainly as a precursor for the production of nylon. These are mostly used as monomer for the production of nylon by a polycondensation reaction with hexamethylene diamine forming 6, 6-nylon. It also finds application for production of Polyurethane and its esters are plasticizers, especially in PVC. Further, significant amounts of adipic acid is used as a food ingredient as a flavorant and gelling aid.

Specifications:

• CAS Number: [124-04-9]
• ChemSpider ID: 191
• Molecular Formula: C6H10O4
• Molar Mass: 146.14 g mol¿1
• Appearance: White Crystals
• Density: 1.36 g/cm³
• Melting Point: 152 °C (425 K)
• Boiling Point: 337 °C (610 K)
• Solubility in Water: Fairly Soluble
• Acidity: (pKa) 4.43, 5.41

We are one of the leading manufacturers of stearic acid that has many industrial as well as commercial uses. Stearic acid is a saturated fatty acid and is a waxy solid. The chemical formula of stearic acid is C18H36O2. Stearic acid is useful as an ingredient in making candles, plastics, dietary supplements, oil pastels and cosmetics, and for softening rubber. It is used to harden soaps, particularly those made with vegetable oil. Stearic acid is one of most commonly used lubricants during injection molding and pressing of ceramic powders. We have registered this acid with the CAS number 57-11-4 and have PubChem number 5281.

Specifications:

• CAS number: [57-11-4]
• PubChem: 5281
• Molecular Formula: C18H36O2
• Molar Mass: 284.478 g/mol
• Density: 0.847 g/cm3 at 70 °C
• Melting Point: 69.6 °C, 343 K, 157 °F
• Boiling Point: 383 °C, 656 K, 721 °F
• Refractive Index (nD): 1.4299

Dicyandiamide is also known as cyanoguanidine is an amine derived from guanidine. Its molecular formula is C2H4N4 and has molecular weight of 84.084. It is a dimer of cyanamide, and is soluble in water, acetone, and alcohol, but not in diethyl ether or chloroform. It is used a slow fertilizer and acts as an intermediate in the synthesis of melamine and other organic chemicals. It is also used together with strong oxidizing agents as an explosive.

Specifications:

• Alias: cyan guanidine, dicyandiamide
• Molecular Formula: C2H4N4
• Molecular Weight: 84.084
• Specifications: ZGB1700-1986
• Index Name: Index
• Fine Grade: A-class grade
• Appearance: White crystal
• Impurity Sediment Content: Qualified
• Qualified Content: 99.5 - 99.0
• Moisture: 0.30 - 0.50
• Ash Content: 0.05 - 0.15
• Melting Point °C: 209-212  208-212
• Calcium Content PPM: 200 - 300