We are engaged in fabricating steel plate flanges which are known for its effective functioning among our valued clients. These are extensively used in power, petroleum and allied industries. Moreover, these can be easily modified in accordance with client necessity and are delivered on time.
 
Following are its types:
 

• Slip On
• Blind
• Threaded
• Lap Joint

 
Below mentioned are its specifications:
 

• Material: Carbon Steel IS 2062, IS 2002, ASTM A515 GR. 60/70, Stainless steel Gr. 304, 304L, 316 & 316L
• Dimension: ASME-ANSI B16.5 class 150 & 300, ASME-ANSI B16.47 Series A & B class 150 & 300, BS 10 table “D” “E” “F” “H”, IS 1538, IS 6392, DIN 2527 ND-6, ND-10, ND-16, ND-25, ND-40, AWWA C207, BS 1560, IS 13159, BS 3293, BS 4504
• Size Range: 15NB TO 1200NB

We offer comprehensive range of forged steel flanges which are highly appreciated for its corrosion resistant and resistant to abrasion features. Sourced from reliable vendors, we use good quality of raw material in the production of our range. 
The raw material includes:
 

• Forged carbon steel as per ASTM A105
• Forged stainless steel as per ASTM A182 grade F 304, F 304 L, F 316, F 316 L

Dimensions as per:
 

• ASME ANSI B 16.5 class 150, 300, 600, 900, 1500 upto size 24 inch NB
• ASME ANSI B 16.47 series A & B class 150, 300, 600, 900, 1500 above size 24 inch NB
• DIN 2632 (ND 10), DIN 2633 (ND 16), DIN 2634 (ND 25), DIN 2635 (ND 40)

Types:

• Socket weld
• Blind
• Weld neck
• Slip on
• Lap joint
• Screwed

Material:

• Mild steel & Galvanized Iron ERW as per IS:1239 part II class "Heavy", "Medium", "Light", 1000 Psi (optional: screwed ends)
• Carbon steel seamless as per ASTM A 234 grade WPB 
• Stainless steel ERW & seamless as per ASTM A 403 grade 304, 304L, 316 & 316L
• Low temperature steel as per ASTM A420
• Alloy steel as per ASTM A 234 grade WP11

Dimensions as per ASME ANSI B16.9 schedule 10, 40, 80, 160

Shapes:

• Elbow, Bend & Return: degree 45, 90 & 180 radius: 1D, 1.5D, 2.5D, 3D, 5D
• Equal and unequal tee
• Concentric and eccentric reducer
• Cap
• Stub end

Size range: 15 mm NB to 600 mm NB

We are engaged in manufacturing socket weld and screwed forged steel fittings which are renowned for its effectual functioning among our valued clients. Procured from reliable vendors, we use good quality of raw material in the production of our gamut. The raw material includes: 

• Forged carbon steel: ASTM A105
• Forged stainless steel: ASTM A182 grade F304, F304L, F316 and F316L
• Forged alloy steel: ASTM A182 F1, F5, F9, F11 and F22

 Dimensions

• ANSI B 16.11, 2000, 3000 and 6000 lbs.

 Sizes 

• 1/4 inch NB to 4 inch NB

Shapes

•           Union
•           90 degree elbow
•           45 degree elbow
•           Tee
•           Cross
•           Full coupling
•           Half coupling
•           Cap
•           Hex head plug
•           Round head plug
•           Square head plug
•           Bushing
•           Hex nipple

Ends

•           Socket weld
•           Screwed to NPT, BSP, BSPT

We offer comprehensive range of steel gate valves which are highly acclaimed for its corrosion resistant, dimensionally accurate and resistant to abrasion features. These valves are extensively used in steel, power and allied industries. Moreover, these are fabricated in accordance with international standards and are delivered on time.
 
Outside screw & yoke type bolted bonnet

Inside screw type, screwed bonnet

 

Body / Bonnet:
Forged carbon steel as per ASTM A 105, class 150, 300, 800, 1500 & 2500

Forged stainless steel as per ASTM A 182 grade F304, F316, class 150, 800, 1500 & 2500

Forged alloy steel as per ASTM A 182 grade F11, F22, class 800, 1500 & 2500

Cast carbon steel as per ASTM A 216 grade WCB, class 150, 300, 600, 900 & 1500

Cast stainless steel as per ASTM A 351 grade CF 8, CF 8M, CF 3, CF 3M, class 150, 300, 600

Cast iron as per IS 210 grade FG 200, 220

Stainless steel bar stock, AISI 304, 316, class 150, 300

Trims:

13 Cr to AISI 410, 18 Cr 8 Ni, 18 Cr 10 Ni 2 Mo, CF 3M, AISI 304, AISI 316

Manufacturing standard:

API 602, BS 5352, API 600, BS 5150

Inspection & testing standard:

API 598, BS 6755

Ends:

Screwed to BSP, BSPT, NPT

Socket weld to ANSI B 16.11

Flanged to ANSI B 16.5 RF class 150, 300, 600, 900, 1500

Flanged to ANSI B 16.1 FF class 125

Flanged to BS table “F”, “H”

Hyd. Test pressure:

Body: Upto 5400 Psig (379 kg/cm2)

Seat: Upto 4000 Psig (281 kg/cm2)

Size:

15 mm NB to 750 mm NB

Options:

IBR valves available

Stellited trim available

Flexible and split wedge available

 

Our range of valves includes:
 

• Cast iron non rising spindle sluice valves as per IS 14846 PN 1.0 / 1.6
• Cast iron, cast carbon steel, stainless steel 304, 316 knife edge gate valve
• Sight Glass Valves
• Balancing Valves
• Float Steam Trap

 

Outside screw & yoke type bolted bonnet

Inside screw type, screwed bonnet

 

Body / Bonnet:
Forged carbon steel as per ASTM A 105, class 150, 300, 800, 1500 & 2500

Forged stainless steel as per ASTM A 182 grade F304, F316, class 150, 800, 1500 & 2500

Forged alloy steel as per ASTM A 182 grade F11, F22, class 800, 1500 & 2500

Cast carbon steel as per ASTM A 216 grade WCB, PN 40 rating, class 150, 300, 600, 900 & 1500

Cast stainless steel as per ASTM A 351 grade CF 8, CF 8M, CF 3, CF 3M, PN 40 rating, class 150, 300, 600

Cast iron as per IS 210 grade FG 200, 220, PN 10, 16 rating,

Stainless steel bar stock, AISI 304, 316, class 150

Trims:

13 Cr to AISI 410, 18 Cr 8 Ni, 18 Cr 10 Ni 2 Mo, CF 3M, AISI 304, AISI 316

Manufacturing standard:

API 602, BS 1873, 5150, 5352, DIN 3356

Inspection & testing standard:

API 598, BS 5146, 6755

Ends:

Screwed to BSP, BSPT, NPT

Socket weld to ANSI B 16.11

Butt weld

Flanged to ANSI B 16.5 RF class 150, 300, 600, 900, 1500

Flanged to BS table “F”, “H”

Flanged to DIN 2545, 2532, 2533

Hyd. Test pressure:

Body: Upto 5400 Psig (379 kg/cm2)

Seat: Upto 4000 Psig (281 kg/cm2)

Size:

8 mm NB to 600 mm NB

Options:

IBR valves available

Stellited trim available

 

Outside screw & yoke type bolted bonnet

Piston lift type bolted cover

Swing lift type bolted cover

Lift up type horizontal screwed cover

Lift up type vertical screwed cover

 

Body / Bonnet:
Forged carbon steel as per ASTM A 105, class 150, 300, 800, 1500 & 2500

Forged stainless steel as per ASTM A 182 grade F304, F316, class 150, 800, 1500 & 2500

Forged alloy steel as per ASTM A 182 grade F11, F22, class 800, 1500 & 2500

Cast carbon steel as per ASTM A 216 grade WCB, PN 40 rating, class 150, 300, 600

Cast stainless steel as per ASTM A 351 grade CF 8, CF 8M, CF 3, CF 3M, PN 40 rating, class 150, 300

Cast iron as per IS 210 grade FG 200, 220, PN 10, 16 rating, class 125

Stainless steel bar stock, AISI 304, 316, class 150, 300

Trims:

13 Cr to AISI 410, 18 Cr 8 Ni, 18 Cr 10 Ni 2 Mo, CF 3M, AISI 304, AISI 316

Manufacturing standard:

BS 1868, 5352, DIN 3356

Inspection & testing standard:

BS 6755

Ends:

Screwed to BSP, BSPT, NPT

Socket weld to ANSI B 16.11

Flanged to ANSI B 16.1 FF class 125

Flanged to ANSI B 16.5 RF class 150, 300, 600

Flanged to BS table “F”, “H”

Flanged to DIN 2545, 2532, 2533

Hyd. Test pressure:

Body: Upto 5400 Psig (379 kg/cm2)

Seat: Upto 4000 Psig (281 kg/cm2)

Size:

15 mm NB to 900 mm NB

Options:

IBR valves available

Stellited trim available

Blow out proof floating ball full bore / reduced bore
Body:

• Cast carbon steel - ASTM A 216 grade WCB
• Investment casting / Cast stainless steel - ASTM A 351 grade CF8 / CF8M / CF3 / CF3M / AISI 304 / 304L / 316 / 316L 
• Carbon steel - EN 8
• Cast iron - IS:210 grade FG 200 / 220
• Polypropylene
• Forged carbon steel  - ASTM A 105

Ball: ASTM A 351 grade CF8 / CF8M / CF3 / CF3M / AISI 304 / 304L / 316 / ASTM A 216 grade WCB / Polypropylene
Stem: AISI 304 / 316
Seat & seals: PTFE
Manufacturing standard: BS 5351 / 5159
Testing standard: BS 6755
Lever: Carbon steel / Carbon steel zinc plated / Carbon steel PP coated / Mild steel zinc coated / AISI 304 with PVC sleeve
Class: 150# / 300# / 800#
Design: One piece / Two piece / Three piece / Two way / Three way / Four way
Ends: 

• Flanged to ASME ANSI B 16.5 RF (150# / 300#) / ASME ANSI B 16.1 FF (125#) / BS 10 table"E" / "F"
• Screwed to BSP / BSPT / NPT / IS 554
• Socketweld to ASME ANSI B 16.11

Pressure and temperature rating - Confirm to table 3 of BS 5351
Hyd. test pressure - Body: 211kg/cm2 / 104 kg/cm2 / 225 Psig (16 kg/cm2) / 425 Psig (30 kg/cm2) / 1100 Psig, Seat: 70.38 kg/cm2 / 51 kg/cm2 / 70 kg/cm2 / 165 Psig (11.5 kg/cm2) / 300 Psig (21 kg/cm2), Pneumatic seat test pressure: 100 Psig, Air test: 7 kg/cm2
Size range: 8 mm NB to 300 mm NB
IBR / Gear operated also available

Super seal design

Super seal design “Ecotech”

Nitrile encapsulated

Epoxy resin coated

Wafer type

Offset disc design

Vertical disc design

Spherical disc vale

 

Body:
Cast iron as per IS 210 grade FG 200, 220

Cast carbon steel as per ASTM A 216 grade WCB

Cast stainless steel as per ASTM A 351 grade CF 8, CF 8M

Investment casting

Disc:

Cast iron as per IS 210 grade FG 200, 220

S. G. Iron

Cast stainless steel as per ASTM A 351 grade CF 8, CF 8M

Cast carbon steel as per ASTM A 216 grade WCB

Stainless steel 304

Seat:

Moulded nitrile

Nitrile liner

PTFE muffler

Hyplon rubber

Replaceable nitrile

Moulded neoprene

Nitrile

PTFE

Shaft:

AISI 410

AISI 304

AISI 316

Bearing bush:

PTFE

Gun metal

Manufacturing standard:

BS 5155

AWWAC 504

API 609

Inspection & testing standard:

BS 6755, 5155

Operation:

Flow – control lever

Ends:

Wafer type to suit ANSI B 16.1 class 125

Wafer type to suit ANSI B 16.5 class 150

Double flanged ends to IS 1538

Hyd. Test pressure:

Body: Upto 300 Psig (21 kg/cm2)

Seat: Upto 220 Psig (15.5 kg/cm2)

Size:

40 mm NB to 2000 mm NB

Options:

ISI mark valves available

Gear operated

Body:

• Mild steel - EN8
• Stainless steel - ASTM A 351 grade CF8 / CF8M / CF3M
• Cast iron - IS:210 grade FG 200 / 220

Pin: 13 Cr to AISI 410 / 18 Cr 8 Ni to AISI 304 / 18 Cr 10 Ni 2 Mo to AISI 316

Rings: Moulded neoprene / nitrile / PTFE

Disc: Mild steel / Stainless steel 304 / 316

Manufacturing & testing standard: API 6D

Ends: Wafer type

Hyd. test pressure - Body: 225 Psig (16 kg/cm2), Seat: 165 Psig (11.5 kg/cm2)

Size range: 25 mm NB to 600 mm NB

Body:

• Cast carbon steel - ASTM A 216 grade WCB
• Cast stainless steel - ASTM A 351 grade CF8 / CF8M
• Cast iron - IS:210 grade FG 200 / 220

Class: 150# / PN 40
Type: "Y" / Pot / "T"
Cover: Bolted / Screwed 
Screen: Stainless steel 304 / 316 / Brass
Ends: 

• Flanged to DIN 2545 / ASME ANSI B 16.5 RF (150#) / ASME ANSI B 16.1 FF (125#) / BS 10 table"E"
• Screwed to BSP / BSPT / NPT
• Socketweld to ASME ANSI B 16.11

Hyd. test pressure - Body: 213 Psig (15 kg/cm2) / 425 Psig (30 kg/cm2) / 854 Psig (60 kg/cm2)
Size range: 15 mm NB to 450 mm NB
IBR also available

• "ISI" mark Mild steel & Galvanized Iron ERW as per IS:1239 part I class "Heavy", "Medium" & "Light" upto 150 mm NB, make: "Tata", "Jindal", "Zenith", "Welspun" 
• "ISI" mark Mild steel ERW as per IS:3589 grade 330 upto 350 mm NB / 410 upto 600 mm NB, 4.85 mm to 12.7 mm thick, make: "Tata", "Jindal", "Zenith", "Welspun"
• Carbon steel seamless as per ASTM A 106 grade B with IBR certificate, schedule 10, 20, 30, 40, 60, 80, 100, 120, 160, class std, XS, XXS, make: MSL / ISMT / JSW  
• Stainless steel ERW & seamless as per ASTM A 312 grade 304, 304L, 316 & 316L, schedule 10, 20, 30, 40, 60, 80, 100, 120, 160, class std, XS, XXS, make: Krystal
• Low temperature steel as per ASTM A 333 grade 6, schedule 10, 20, 30, 40, 60, 80, 100, 120, 160, class std, XS, XXS, make: MSL / ISMT / JSW
• Alloy steel as per ASTM A 335 grade P1, P5, P11, P22, schedule 10, 20, 30, 40, 60, 80, 100, 120, 160, class std, XS, XXS, make: MSL / ISMT / JSW
• Carbon steel seamless boiler tube as per BS 3059 CDS/HFS
• Boiler tubes with IBR certificate as per BS 3059 ERW/CDW
• Square & Rectangle section as per ISS 4923/ASTM A 500

• Size range: 6 mm NB to 600 mm NB