Valves And Strainers

Super seal design

Super seal design “Ecotech”

Nitrile encapsulated

Epoxy resin coated

Wafer type

Offset disc design

Vertical disc design

Spherical disc vale

 

Body:
Cast iron as per IS 210 grade FG 200, 220

Cast carbon steel as per ASTM A 216 grade WCB

Cast stainless steel as per ASTM A 351 grade CF 8, CF 8M

Investment casting

Disc:

Cast iron as per IS 210 grade FG 200, 220

S. G. Iron

Cast stainless steel as per ASTM A 351 grade CF 8, CF 8M

Cast carbon steel as per ASTM A 216 grade WCB

Stainless steel 304

Seat:

Moulded nitrile

Nitrile liner

PTFE muffler

Hyplon rubber

Replaceable nitrile

Moulded neoprene

Nitrile

PTFE

Shaft:

AISI 410

AISI 304

AISI 316

Bearing bush:

PTFE

Gun metal

Manufacturing standard:

BS 5155

AWWAC 504

API 609

Inspection & testing standard:

BS 6755, 5155

Operation:

Flow – control lever

Ends:

Wafer type to suit ANSI B 16.1 class 125

Wafer type to suit ANSI B 16.5 class 150

Double flanged ends to IS 1538

Hyd. Test pressure:

Body: Upto 300 Psig (21 kg/cm2)

Seat: Upto 220 Psig (15.5 kg/cm2)

Size:

40 mm NB to 2000 mm NB

Options:

ISI mark valves available

Gear operated

Outside screw & yoke type bolted bonnet

Inside screw type, screwed bonnet

 

Body / Bonnet:
Forged carbon steel as per ASTM A 105, class 150, 300, 800, 1500 & 2500

Forged stainless steel as per ASTM A 182 grade F304, F316, class 150, 800, 1500 & 2500

Forged alloy steel as per ASTM A 182 grade F11, F22, class 800, 1500 & 2500

Cast carbon steel as per ASTM A 216 grade WCB, PN 40 rating, class 150, 300, 600, 900 & 1500

Cast stainless steel as per ASTM A 351 grade CF 8, CF 8M, CF 3, CF 3M, PN 40 rating, class 150, 300, 600

Cast iron as per IS 210 grade FG 200, 220, PN 10, 16 rating,

Stainless steel bar stock, AISI 304, 316, class 150

Trims:

13 Cr to AISI 410, 18 Cr 8 Ni, 18 Cr 10 Ni 2 Mo, CF 3M, AISI 304, AISI 316

Manufacturing standard:

API 602, BS 1873, 5150, 5352, DIN 3356

Inspection & testing standard:

API 598, BS 5146, 6755

Ends:

Screwed to BSP, BSPT, NPT

Socket weld to ANSI B 16.11

Butt weld

Flanged to ANSI B 16.5 RF class 150, 300, 600, 900, 1500

Flanged to BS table “F”, “H”

Flanged to DIN 2545, 2532, 2533

Hyd. Test pressure:

Body: Upto 5400 Psig (379 kg/cm2)

Seat: Upto 4000 Psig (281 kg/cm2)

Size:

8 mm NB to 600 mm NB

Options:

IBR valves available

Stellited trim available

 

Outside screw & yoke type bolted bonnet

Piston lift type bolted cover

Swing lift type bolted cover

Lift up type horizontal screwed cover

Lift up type vertical screwed cover

 

Body / Bonnet:
Forged carbon steel as per ASTM A 105, class 150, 300, 800, 1500 & 2500

Forged stainless steel as per ASTM A 182 grade F304, F316, class 150, 800, 1500 & 2500

Forged alloy steel as per ASTM A 182 grade F11, F22, class 800, 1500 & 2500

Cast carbon steel as per ASTM A 216 grade WCB, PN 40 rating, class 150, 300, 600

Cast stainless steel as per ASTM A 351 grade CF 8, CF 8M, CF 3, CF 3M, PN 40 rating, class 150, 300

Cast iron as per IS 210 grade FG 200, 220, PN 10, 16 rating, class 125

Stainless steel bar stock, AISI 304, 316, class 150, 300

Trims:

13 Cr to AISI 410, 18 Cr 8 Ni, 18 Cr 10 Ni 2 Mo, CF 3M, AISI 304, AISI 316

Manufacturing standard:

BS 1868, 5352, DIN 3356

Inspection & testing standard:

BS 6755

Ends:

Screwed to BSP, BSPT, NPT

Socket weld to ANSI B 16.11

Flanged to ANSI B 16.1 FF class 125

Flanged to ANSI B 16.5 RF class 150, 300, 600

Flanged to BS table “F”, “H”

Flanged to DIN 2545, 2532, 2533

Hyd. Test pressure:

Body: Upto 5400 Psig (379 kg/cm2)

Seat: Upto 4000 Psig (281 kg/cm2)

Size:

15 mm NB to 900 mm NB

Options:

IBR valves available

Stellited trim available

We offer comprehensive range of steel gate valves which are highly acclaimed for its corrosion resistant, dimensionally accurate and resistant to abrasion features. These valves are extensively used in steel, power and allied industries. Moreover, these are fabricated in accordance with international standards and are delivered on time.
 
Outside screw & yoke type bolted bonnet

Inside screw type, screwed bonnet

 

Body / Bonnet:
Forged carbon steel as per ASTM A 105, class 150, 300, 800, 1500 & 2500

Forged stainless steel as per ASTM A 182 grade F304, F316, class 150, 800, 1500 & 2500

Forged alloy steel as per ASTM A 182 grade F11, F22, class 800, 1500 & 2500

Cast carbon steel as per ASTM A 216 grade WCB, class 150, 300, 600, 900 & 1500

Cast stainless steel as per ASTM A 351 grade CF 8, CF 8M, CF 3, CF 3M, class 150, 300, 600

Cast iron as per IS 210 grade FG 200, 220

Stainless steel bar stock, AISI 304, 316, class 150, 300

Trims:

13 Cr to AISI 410, 18 Cr 8 Ni, 18 Cr 10 Ni 2 Mo, CF 3M, AISI 304, AISI 316

Manufacturing standard:

API 602, BS 5352, API 600, BS 5150

Inspection & testing standard:

API 598, BS 6755

Ends:

Screwed to BSP, BSPT, NPT

Socket weld to ANSI B 16.11

Flanged to ANSI B 16.5 RF class 150, 300, 600, 900, 1500

Flanged to ANSI B 16.1 FF class 125

Flanged to BS table “F”, “H”

Hyd. Test pressure:

Body: Upto 5400 Psig (379 kg/cm2)

Seat: Upto 4000 Psig (281 kg/cm2)

Size:

15 mm NB to 750 mm NB

Options:

IBR valves available

Stellited trim available

Flexible and split wedge available

 

Our range of valves includes:
 

• Cast iron non rising spindle sluice valves as per IS 14846 PN 1.0 / 1.6
• Cast iron, cast carbon steel, stainless steel 304, 316 knife edge gate valve
• Sight Glass Valves
• Balancing Valves
• Float Steam Trap

 

Body:

• Cast carbon steel - ASTM A 216 grade WCB
• Cast stainless steel - ASTM A 351 grade CF8 / CF8M
• Cast iron - IS:210 grade FG 200 / 220

Class: 150# / PN 40
Type: "Y" / Pot / "T"
Cover: Bolted / Screwed 
Screen: Stainless steel 304 / 316 / Brass
Ends: 

• Flanged to DIN 2545 / ASME ANSI B 16.5 RF (150#) / ASME ANSI B 16.1 FF (125#) / BS 10 table"E"
• Screwed to BSP / BSPT / NPT
• Socketweld to ASME ANSI B 16.11

Hyd. test pressure - Body: 213 Psig (15 kg/cm2) / 425 Psig (30 kg/cm2) / 854 Psig (60 kg/cm2)
Size range: 15 mm NB to 450 mm NB
IBR also available

Blow out proof floating ball full bore / reduced bore
Body:

• Cast carbon steel - ASTM A 216 grade WCB
• Investment casting / Cast stainless steel - ASTM A 351 grade CF8 / CF8M / CF3 / CF3M / AISI 304 / 304L / 316 / 316L 
• Carbon steel - EN 8
• Cast iron - IS:210 grade FG 200 / 220
• Polypropylene
• Forged carbon steel  - ASTM A 105

Ball: ASTM A 351 grade CF8 / CF8M / CF3 / CF3M / AISI 304 / 304L / 316 / ASTM A 216 grade WCB / Polypropylene
Stem: AISI 304 / 316
Seat & seals: PTFE
Manufacturing standard: BS 5351 / 5159
Testing standard: BS 6755
Lever: Carbon steel / Carbon steel zinc plated / Carbon steel PP coated / Mild steel zinc coated / AISI 304 with PVC sleeve
Class: 150# / 300# / 800#
Design: One piece / Two piece / Three piece / Two way / Three way / Four way
Ends: 

• Flanged to ASME ANSI B 16.5 RF (150# / 300#) / ASME ANSI B 16.1 FF (125#) / BS 10 table"E" / "F"
• Screwed to BSP / BSPT / NPT / IS 554
• Socketweld to ASME ANSI B 16.11

Pressure and temperature rating - Confirm to table 3 of BS 5351
Hyd. test pressure - Body: 211kg/cm2 / 104 kg/cm2 / 225 Psig (16 kg/cm2) / 425 Psig (30 kg/cm2) / 1100 Psig, Seat: 70.38 kg/cm2 / 51 kg/cm2 / 70 kg/cm2 / 165 Psig (11.5 kg/cm2) / 300 Psig (21 kg/cm2), Pneumatic seat test pressure: 100 Psig, Air test: 7 kg/cm2
Size range: 8 mm NB to 300 mm NB
IBR / Gear operated also available

Body:

• Mild steel - EN8
• Stainless steel - ASTM A 351 grade CF8 / CF8M / CF3M
• Cast iron - IS:210 grade FG 200 / 220

Pin: 13 Cr to AISI 410 / 18 Cr 8 Ni to AISI 304 / 18 Cr 10 Ni 2 Mo to AISI 316

Rings: Moulded neoprene / nitrile / PTFE

Disc: Mild steel / Stainless steel 304 / 316

Manufacturing & testing standard: API 6D

Ends: Wafer type

Hyd. test pressure - Body: 225 Psig (16 kg/cm2), Seat: 165 Psig (11.5 kg/cm2)

Size range: 25 mm NB to 600 mm NB