Heat Strengthened Glass
glass heat-strengthened glass is approximately twice as strong as annealed glass of similar thickness and configuration. heat-strengthened glass generally fractures in a manner similar to annealed glass and tends to remain in the opening when broken. It is intended for general glazing where additional strength and/or resistance to mechanical and/or thermal stress are desired. heat-strengthened glass is not a safety glazing product and therefore should not be used where safety glazing is required.
Automobile Window Glass
automobile window glass
most vehicles on the road contain tempered glass in their side, rear and roof window openings. In accidents, this tempered glass shatters and breaks, causing lacerations and other injuries and opening up portals through which occupants can be fully or partially ejected. While the auto industry has long ignored the obvious dangers posed by the use of tempered glass, the tide is now changing and the "glass defect" should no longer be overlooked.
the widespread use of tempered glass for vehicle side windows, rear windows and sunroofs should no longer be considered acceptable design practice. The expanding usage of laminated glass in high-end, luxury vehicles not only is making clear the benefits of laminated glass, but also the ease with which laminated glass could be substituted for tempered glass in passenger cars, pickups and suvs. In a collision, when tempered glass breaks, the entire piece of glass shatters and flies about. When this happens, the flying glass can cause lacerations and other injuries and the window opening becomes a potential portal of ejection.
size ranging from thickness 4. 96 mm to 80 mm
max size : 8ft x 6ft
Under the brand name of durasafe® , the company manufactures international quality tempered glass that is already used widely across the country. As the name suggests , this glass is about four times stronger than the normal annealed glass. These improved properties are a result of the stress profile that is induced in the glass by the toughening heat treatment process.
during this process,the annealed (stress free) glass is heated upto a temperature between its glass transition temperature and its softening point and then rapidly cooling the surface. This toughening heat treatment process produces highly desirable conditions of induced stress,which results in additional strength ,resistance to thermal stress and impact resistance.
decorative glass matter
few enhancements personalize a home and lend elegance to a room like decorative specialty glass. Stained glass spills uniquely fascinating patterns of colors and textures onto ceilings and walls. Beveled glass splits sunlight into its full spectrum of colors while v-grooved designs exude style and beauty. Obscure glass allows light in while still providing a degree of privacy. Looking for something really unique? Consider the possibilities for truly personalizing your home by custom sandblasting a family crest or favorite design onto the glass of your replacement windows or doors.
Architectural Bend Glass
architectural bend glass
as the increasing complexity of the contemporary designs has become the mainstream in today's architecture, so is the demand for the different and unique shapes of glass. curved or blend glass is one's obvious choice for an alternative to the stereotype rectangular design of buildings. Curved or blend glass is also used in indoors to enhance the aesthetics of interior design. Curved stairwells, display cases and cylindrical lift capsules are some examples of architectural blend glass excellence. Years of experience in the curved glass industry has made glass company the leader in this field. Durabend is one such examples of perfect flawless and distortions free blend glass. Under the strictly controlled heating and cooling process of a fully automatic horizontal tempering plant, architectural flat glass can be persuaded to adopt any new curve or form. Great care and precision allows the designer to create unique building facades, lending individuality to projects. This freedom of design is culminated by using tinted and reflective glass.
architectural toughened glass
size ranging from thickness 4mm to 19mm
max size : 8 ft x 6 ft
glass cookware lidsintroduction
the company is a leading manufacturer of glass cookware lids under the name of duracook. The lids are manufactured in a fully automated korean plant having a manufacturing capacity of 300,000 lids per month. All glass lids are break resistant and offers see-through convenience. Moreover, the glass lid being a bad conductor of heat, keeps the food hot even after cooking. The glass lid generates what is called as "self-basting system (waterless cooking).
laminated safety glass has a layer of pvb sandwiched between 2 layers of thin glass. In a collision, the glass will fracture but the pvb interlayer holds the fragments together and in place in the window opening. The pvb interlayer serves to hold the glass in place which, in turn, acts to contain occupants by preventing ejections. Even after severe accidents, windshields typically remain in place. Ejections through windshields are largely a thing of the past. This glass has its highest utility in car windscreens, domes, glass ceilings, glass doors etc. Keeping the safety factor in mind, the company regularly tests its glass by impact resistance method and head form method.
today heavy traffic and increasing road accidents, laminated safety glass has become indispensable for automobiles. Govt. On india has made it mandatory to uselaminated safety glass in all vehicles.
size ranging from thickness 4. 96 mm to 80 mm
max size : 8ft x 12ft
Wind Screen Laminated Glass
two layers of glass are bonded together with a transparent layer of polyvinyl butyral (pvb) sandwiched in between them. This is done in an environmentally-controlled clean room. The glass and pvb sandwich is permanently bonded together using pressure and heat to form the windscreen.
what are the advantages of laminated glass?
in the event of a car accident or damage to the glass, the broken glass normally remains bonded to the pvb. This means that there is less chance of drivers and passengers being cut or pierced by shards of broken windscreen.
a laminated screen is also much harder to penetrate so people and objects are less likely to go through it.
is laminated glass ever used for sidelights and rear windows?
yes, an increasing number of manufacturers are using laminated glass for the body glass of their new models. This is for reasons of increased safety, security and comfort.
toughened glass as the name suggests, this glass is about four times stronger than the normal annealed glass. Under the brand name of durasafe, the company manufactures international quality toughened glass that is already widely used across the country. The special feature of this glass is that it is available in any form and curve as per the requirements of architects, interior designers and builders. This feature caters to the artistic frenzy of the designer and caters forms beyond definition.
we bend glass for all types of applications, including limousines, sunroofs, truck caps, conversion vans, residential/aquariums, commercial furnishings, marine glazing and fixturing.
bending: for a sleek, aerodynamic appearance, glass can be bent to follow the contours of the vehicle sides and top. Our technology allows us to create precise cylindrical or complex bends without expensive tooling.
furniture / fixtures:
envision curved glass that hugs every contour of your furniture designs. We can create cylindrical or complex bends - without expensive tooling costs - and temper glass to your precise specifications.
imagine walls of glass soaring skyward and meeting in a curved atrium above the stern, or a sleek bent/tinted windshield and windows following the contoured lines of your marine design. These designs - and most anything you can imagine - are possible because of spec-temp's state-of-the-art equipment.
size ranging from thickness 4 mm to 19 mm
max size : 8 ft. X 6 ft.
Bullet Proof / Security Glass
it is a high strength glass which resists any forced entry and it is good for security enclosures, atm machines, jewellery shops etc.
field of application
- light and heavy military vehicles
- civil vehicles
- armored cars and vip limousines
- podiums for vip enclosures
- home against bullets
- equipments on borders
- sentry posts
- police headquarters
we have started manufacturing windows only 3 months back and have proved ourselves as a one of the quality supplier of windows to acgl, bmtc, ksrtc, ashok leyland and so on.
- durable powder painted aluminium frames
- eco friendly installation system as no special tools or any extra material is used
- different combination for sliding and fixed panels can be designed for proper ventilation
- urban buses application
- fixed window combined with one single sliding window
- different designs and shapes of window buses for different models and buses.
- inter-city buses application
- features two sliding in larger sizes
- fully framed sliders for better vibration resistance
- heavy duty profile increases structural integrity
- alumimium windows are use for vibration resistance and structural integrity