Hepa & Minipleat Hepa Filters

DYNA, HEPA Filters offered by us are designed for air intake & in extract systems of critical applications where high filtration is required. These filters are capable of retaining particulate matter down to 0.01 microns. We can make them available with efficiencies between 95% and 99.999% (H10-H14 up to U17).


Features:

• Low initial pressure drop
• High dust holding capacity
• High cost / performance ratio
• Wide range of standard sizes
• Individually leak tested

Applications:


These are used for fine particulate filtration in:

• Hospitals (Operation Theater)
• Clean room applications
• Clean room equipments

Type Deep pleated flange or box type:

• Casing Construction Galvanized steel / CRCA powder coated / Aluminium anodized / SS 304
• Separators Corrugated Aluminium
• Filter Media Micro fibre glass paper (Imported)
• Sealant Polyurethane based
• Gasket Neoprene rubber gasket
• BS EN 779 CLASS H10, H11, H12, H13, H14 up to U17
• Filter Efficiency H10 - 95 % @ 0.3 micron
• H11 - 99.9 % @ 0.3 micron
• H12 - 99.97% @ 0.3 micron
• H13 - 99.99% @ 0.3 micron
• H14 - 99.999% @ 0.3 micron
• Eurovent Class EU 10, EU 11, EU 12, EU 13, EU 14 up to U17

Minipleat HEPA Filter:


DYNA Minipleat Hepa Filters are used in areas that require high/very high level of purity. These are primarily designed as intake filters for low turbulence displacement flow clean room ceilings & clean workbenches. The typical applications can be found in microelectronics, microbiology, film and magnetic tape production, semiconductor manufacture, medicine, chemistry, pharmacy, compact disk manufacture, laboratories and food industry.


Features:

• Low initial pressure drop
• High dust holding capacity
• High cost / performance ratio
• Wide range of standard sizes
• Individually leak tested
• Factory extruded, lockable type, 69 mm Aluminium casing
• Compact in size and light in weight

Applications:

• Laminar flow for clean benches & other clean room equipments
• Clean room applications

Specifications:

• Type Minipleat Hepa flange or box type
• Casing Construction Aluminium anodized, extruded type
• Separators Continuous Hot melt glue
• Filter Media Micro fibre glass paper (Imported)
• Sealent Polyurethane based
• Gasket Neoprene rubber gasket
• BS EN 779 Class H13 / H14 up to U17
• Filter Efficiency H13 / H14 up to U17
• Eurovent Class EU 13 / EU 14 up to U17