Anti Vibration Mountings

Manufacturer and supplier of an excellent range of anti vibrating mountings, anti vibration mounts, anti vibration pads. These tools effectively reduce the shock, noise, vibration of machines.

Machine Mounts

Item Code: DYNAMOUNT
Vibration & Shock can be easily controlled by installation of machines on DYNA MOUNT . Reduction in vibration & shock will reduce noise of machines also. DYNA MOUNT will act as an isolator, reducing vibratory transmissions to a considerable extent.

SALIENT FEATURES OF DYNA MOUNT:

  • Shock and Vibration Isolation
  • No Foundation required
  • Flexible Production Line
  • Reduce Maintenance Cost
  • Built-in leveling device
  • Less noise
  • Ensure long and trouble free operating of. Machine / Equipment

Construction :

DYNA MOUNT Anti-Vibration machine mounts consist of three metal plates i.e. Top Plate, Free Plate & Bottom Plate . These metal plates are molded with special rubber. A nut is provided at the center of top plate for fixing the base plate of the machine by means of bolt / stud. Free plate is floating on the rubber inside Bottom plate protects rubber of DYNA MOUNT from getting damage by oil water or any chemical spill on the floor.

APPLICATION OF DYNA MOUNT


  • Metal cutting machines like Power Press, Milling Machines, Grinders, Jig Borers, Guillotine Machine, Shearing Machines, Gear Hobbers, Press Break, Notching machines etc.
  • Plastic machines like Injection Molding Machines, Blow Molding Machines, Extruders etc.
  • Pharmaceutical Machines like Tabeletting machines, Coating Machine, Pulverizes etc.
  • Textile machines like Ring Frames etc.
  • Wood working Machines
  • Generating Sets
  • Compressors
  • Centrifugal
  • Chilling plants,
  • Electrical panel etc.

Other Information :

Minimum Order Quantity: 1 Piece

Delivery Time: Depends upon the quantity

Packaging Details: In box

Anti Vibration Mount

Item Code: ISOMOUNT
Anti Vibration machine mount ISO MOUNT very ideally useful for the installation of initial torque & rotary motion machines.

Salient Features Of ISO Mount

 

  • Absorbs shocks & vibration
  • No concrete foundation or grouting needed
  • Because of design of casting, rubber is protected from oil & physical damages.
  • Lowers noise level.
  • Free from external vibration. 
  • Easy installation
  • Can safely be installed on Mobile units like Train, Vans, Trucks, and Wagons.


CONSTRUCTION: 


ISO MOUNT is made up of a casting cover and bottom plate with a pair of rubber –to – metal bonded flexible units within which are at an angular position. The bottom plate has two hole laterally to enable fix the same on the floor or structure and the cover plate has a threaded hole to mount the equipment.


The Bottom Plate :  Has a hole on either side to fix ISO MOUNT on channel , floor etc. if at all required.
ISO MOUNT can be place on a Channel/ floor by means of bolt. Also, if needed a Friction Pad made out of rubber can also be used instead of conventionally founded flooring.


WORKING

When machine is placed on ISO MOUNT, the rubber to metal bonded rectangular inserts are loaded in compression & Shear. A combination which gives the longest life with

 

APPLICATION OF ISO MOUNT

 

  • Generating sets, Pump sets
  • Fans & Blowers
  • Compressors
  • Grinding Machines
  • Food Processing Machines
  • Pharmaceutical Machines
  • Centrifuges
  • Crushers
  • Diesel Engines
  • Engine Test Beds
  • Exhaust Systems (pipe Supports)
  • Hydraulic Machinery
  • Printing machinery
  • Rotary Driers and Sifters
  • Screens
  • Textile Machinery

Other Information :

Delivery Time: Depends upon the quantity

Leveling mount

Item Code: Levelmount
LEVEL MOUNT made out of Rubber (Bottom Mount) with Mild Steel or Stainless Steel Swivel Stud. (as per sketch enclosed).

CONSTRUCTION:


Construction of the LEVEL MOUNT is having long Swivel Stud , which can tilt 60° on either side. Bottom of mount is made out of Rubber which will absorb Shock and Vibration. Installation of machine on LEVEL MOUNT is very Easy. Insert Stud of LEVEL MOUNT in the foundation hole of Machine. Machine can be bring Up or Down by tightening nut (at bottom of the Swivel Stud) in clock or Anti-clock direction for Leveling Purpose. After leveling the machine, please tight check nut so that Machine level will not disturb.

 

SALIENT FEATURES OF LEVEL MOUNT


  • No Cementing or Bolting needed
  • Electrically non – conductive
  • Fast , easy & precise leveling of machines & equipments
  • 60° tilting available on either side

 

APPLICATION OF LEVEL MOUNT


  • Electronic equipments
  • Medical equipments
  • Packaging machinery
  • Conveyors
  • Vibratory feeders
  • Material Handling Equipments
  • Food & drug processing equipments
  • Dairy processing machines

 

Vibra Mount

Item Code: vibramount
Vibra Mount is another proven and ideal device for elimination of shocks and vibrations. It works on the principles of rubber to metal weld techniques and utilizes the valuable electric property of rubber.


Vibra Mount successfully prevents the transmission of shocks & vibrations at the source and protects sensitive apparatuses from external disturbances.

Vibra Mount can be fixed with bolts; they protect machinery & equipment even in packed case, from damages while in transit.

Salient Features Of Vibra Mount


  • Helps quick and easy installation
  • Isolates Precision machines instruments etc. from outside Vibrations and Shocks.
  • Improves Quality of performance.
  • Saves Foundation perquisites
  • Increase Machine Life.

Application Of Vibra Mount


  • Sensitive Instruments
  • Electrical Panels
  • Small Blowers
  • Small Pumps
  • Electronic apparatus.

Anti Vibration Mountings

Anti Vibration Mountings

Yes! I am interested

Item Code: DISCMOUNT

Introduction:


Anti vibration mount disc mount used for installation of heavy machines / equipment.
disc mount consist of oil and age resistant synthetic rubber and the compact mount gives the optimal absorption of vibration with built in leveling device.

 

Salient features of disc mount

 

  • No foundation or grouting
  • Lower noise level
  • Precise leveling
  • Free from external shock loads and vibrations
  • Mobility of machinery lay-out
  • Easy installation
  • Immediate commissioning

 

Working of disc mount :


Lift the machine from the floor and install on disc mount, screw down the bolts into their respective guides . By tightening bolt leveling guide will rise from ground level along with machine. Thus you level the machine. After leveling the machine, start the machine. Machine will generate shock / vibrations, this vibration will pass to the rubber of disc mount, and rubber will absorbs shock / vibration without transmitting them to the floor. 


Thereby improving the efficiency of machine appreciably.


Application of disc mount


  • High frequency generators
  • Power presses
  • Notching machines
  • Lathes
  • CNC machines
  • Wire cutting machines
  • Plastic processing machineries
  • Pharmaceutical machines etc.

Anti Vibration Pads

Vibration & Shock can be easily controlled by installation of machines on DYNA MOUNT . Reduction in vibration & shock will reduce noise of machines also . The DYNA MOUNT will act as an isolator, reducing vibratory transmissions to a considerable extent.

Salient Features of Dyna Mount

  • Shock and Vibration Isolation
  • No Foundation required
  • Flexible Production Line
  • Reduce Maintenance Cost
  • Built-in leveling device
  • Less noise
  • Ensure long and trouble free operating of. Machine / Equipment

Construction

DYNA MOUNT Anti-Vibration machine mounts consist of three metal plates i.e. Top Plate, Free Plate & Bottom Plate . These metal plates are molded with special rubber. A nut is provided at the center of top plate for fixing the base plate of the machine by means of bolt / stud. Free plate is floating on the rubber inside

Bottom plate protects rubber of DYNA MOUNT from getting damage by oil water or any chemical spill on the floor.

Installation Instruction

  • Select the right model of DYNA Mount for Optimum Performance
  • Locate the DYNA MOUNT below the foundation hole of the equipment. Insert the bolt thorough foundation hole of the equipment in to DYNA MOUNT
  • Initially tighten the bolt by hand and finally with Spanner

Working of Dyna Mount

  • There is a built-in device for leveling .Please note that you can increase height of DYNA MOUNT up to 12mm from the Ground level for Leveling of your machine
  • Start the equipment on which DYNA MOUNT is fixed . Some of the shock waves & vibration generated by the same shall pass first through the top plate of the mount and onwards to the rubber which absorbs the waves & vibration
  • The other waves & vibration shall pass on through the bolt to the free plate floating on rubber within  DYNA MOUNT which absorbs the shocks & vibrations thereby terminating their onward travel to the floor. This without doubt improves greatly the efficiency of the equipment mounted on our DYNA MOUNT

Application of Dyna Mount

  • Metal cutting machines like Power Press, Milling Machines, Grinders, Jig Borers, Guillotine Machine, Shearing Machines, Gear Hobbers, Press Break, Notching machines etc
  • Plastic machines like Injection Molding Machines, Blow Molding Machines, Extrudes etc
  • Pharmaceutical Machines like Tabeletting machines, Coating Machine, Pulverizes etc
  • Textile machines like Ring Frames etc
  • Wood working Machines
  • Generating Sets
  • Compressors
  • Centrifugal
  • Chilling plants
  • Electrical panel etc

Table of Dyna Mount



MODEL DIAMETER IN MM. HEIGHT IN MM. BOLT SIZE RECOMMENDED GROSS Wt. Of Machine
DC-20 80 38 M12 100 to 300 kgs.
DC-30 120 38 M12 300 to 700 Kgs.
DC-65 160 41 M16 700 to 1000Kgs.
DC-82 160 41 M12 / M16 1000 kgs & above

Anti Vibration Mount

Item Code: AntiVibrationMounts
Vibration & Shock can be easily controlled by installation of machines on our Anti Vibration Mount. Reduction in vibration & shock will reduce noise of machines also . The Anti Vibration Mount will act as an isolator, reducing vibratory transmissions to a considerable extent.

Salient Features of Anti Vibration Mount

  • Shock and Vibration Isolation
  • No Foundation required
  • Flexible Production Line
  • Reduce Maintenance Cost
  • Built-in leveling device
  • Less noise
  • Ensure long and trouble free operating of. Machine / Equipment

Application of Anti Vibration Mount

  • Metal cutting machines like Power Press, Milling Machines, Grinders, Jig Borers, Guillotine Machine, Shearing Machines, Gear Hobbers, Press Break, Notching machines etc
  • Plastic machines like Injection Molding Machines, Blow Molding Machines, Extrudes etc
  • Pharmaceutical Machines like Tabeletting machines, Coating Machine, Pulverizes etc
  • Textile machines like Ring Frames etc
  • Wood working Machines
  • Generating Sets
  • Compressors
  • Centrifugal
  • Chilling plants
  • Electrical panel etc.

Cushy foot Mounting Pads

Cushy foot Mounting Pads

Yes! I am interested

Item Code: cushyfoot
We manufacture Cushyfoot mounting pad (our model is ISO MOUNT - designwise equivalant to Cushyfoot Mounting Pads) since last 40 yrs. Cushy Foot Mounting pads (ISO MOUNT) give insulation against Sher Vibration.

Cushyfoot mountings are suitbale for : -
1).Generator sets
2).Blowers
3).Compressors
4).Pumps
5).Engine Test beds
6).Electric Hammers
7).printing machines
8).Precision grinders
9).Polishers
10).Control Cabinet for thermal power stations, cement, fertilizers, chemical plants etc.

Cushyfoot mounting (ISO MOUNT) have arrangement to fix on floor or it can be installed with friction pads

Other Information :

Port of Dispatch: Nhava Sheva

Delivery Time: Ex-Stock


Products