Magnetic Tools

• Precision ground vee blocks has flatness, parallelism and squareness within 5 Microns.
• Magnetic V Blocks are made with everlasting powerful rare earth NdFeB permanent magnets.
• Outer casing is made of mild steel.
• Can be turned On and Off with rotation of knob.
• Three working faces activated simultaneously - Top Vee, Bottom Vee and Back side activated simultaneously.
• Shielded against penetration of coolants.
• Supplied with hardened V on top & holding bottom face.
• Supplied individually and as pairs.

• These are useful during measuring and scribing of rods, drilling and grinding irregular work pieces and also flat pieces for 45 Degree and perpendicularity.
• They can be fixed to any flat ferrous surface including magnetic chucks without energising the magnetic chuck or demagnetising the Vee block.

for Art No. 31101-31106, 31201.

• Arms freely adjustable without distortion.
• Compact in size.
• Strong magnetic force.
• With a powerful magnetic force it can be held on vertical faces, upside down or on round bar.

for Art No. 31107-31110.

• Hydraulic type tightens three joints simultaneously just by one touch operation.
• Arms are freely adjustable without distortion.
• Compact in size.
• Equipped with fine adjuster and medium size magnet for stabilizing the base.

• As an auxiliary tool for general measurements, these bases can increase precision and improve working efficiency.

• Precision ground vice with flatness, parallelism and square ness within 5 Microns.
• Most suitable for use as an auxiliary tool for grinding small or tapered objects or the ends of rods and flat plates vertically up.
• Magnetic force acts from both sides in a vice-like fashion.
• The upper surface and both sides are magnetic and are thus suitable for processing work pieces that require a right angle square.

• For machining applications where accuracy and holding of irregular jobs are required.
• V face of the movable jaw can be aligned to the work piece face.
• Can hold delicate jobs without distortion.

• Precision ground multi angle face holding block.
• Opposite side with Plane and V-face.
• Switching On/Off with rotating handle and variable power.
• Six working faces activated at a time with 45º /90º /135º, job set up facility.

• Useful during measuring and marking of round work pieces and also flat pieces.
• Holders can be fixed to any flat steel surface.
• Can hold pipes/ flat component for welding, drilling and grinding.
• Suitable for tack welding work.

• Cast aluminium body with fixed right angle.
• Keeps hands free during welding of two sheets.

• Can be used for lifting small, hot, oily jobs.
• Suitable for soldering, welding, shearing and metallic carpentry works.
• Suitable for marking and inspection.
• Ideal for butting/ reference points in machine tools.

• Small and compact size.
• Powerful holding of the magnet on the machine table.
• Easy holding of the diamond dresser.

• To hold the diamond dresser for dressing the grinding wheel.

• Simple, sturdy, economic design having cast aluminium body.
• Variable angle setting.
• Powerful ferrite magnets hold sheets securely.
• Keeps hands free during welding of two sheets.
• Suitable for marking and inspection.

• Especially suited for soldering or tack welding.
• Keeps hands free during welding of two sheets.
• Ideal for inspection and setting of jobs.

• Precision grinded rectangular magnetic blocks.
• Top, bottom and back side power.
• The module is designed for light weight and easy handling.
• They have water proof and oil proof construction.
• Can be mounted and demounted easily using the select lever.

• Holds objects to be measured without damage and enables high precision measurement.
• Holds tools for EDM and wire cutting.
• Holds tools for three-dimensional measuring instruments and various measuring systems.