Our company offer a wide range of air heat burner which gives solutions to various industries. Some of its features include:
• Simple Operation
• Long Lasting Operation
• Much lower CO emissions
• Line type burners ideal for generating volume of clean, hot air.
• Applications include oven, dryers, fume incinerators, and similar industrial   equipment.
• Have an integral combustion air blower mounted on the burner's steel case.
• Blower allows stable operation over a wide range of duct velocities without installing a profile plate around the burner.
• The burner can also be ordered without a blower for use in recirculating air applications.

We offer a wide range of ratio matic burner, which is known for its safe use & simple usage. Giving solutions to various industries, our range of burner have the following features :

• Ratio regulator automatically compensates for changes in  operating conditions --such as dirty air filers-- which can upset the air/gas ratio in competitive linked valve systems.
• Turn down range of up to 100:1.
• Direct-drive air butterfly eliminates linkages which can slip or jam during operation.
• Fast-mixing nozzle provides clean stable flame at all firing rates and releases heat into the chamber, not the oven wall.
• Ideal for emission-sensitive processes due to low NOx,CO and aldehydes.
• Capacities from 500,000 to 25,000,000 Btu/hr.

Our range of therm jet burner is technically designed to give the best possible solution to various industries. Our range of therm jet burner is designed to deliver more, its burners represent a technological leap forward in every area of design and performance that counts. These burners set new standards for velocity, emissions and flexibility.

Some of the feature include:
• It has the highest operating velocity of any burner available.
• Comparison tests with competitive models prove that it delivers the lowest emissions.
• Integrated gas and air orifices simplify burner piping, set-up and adjustment.
• Air and gas inlets are independently adjustable in 90 degree increments to suit a variety of piping alternatives.
• Installation, operation, and maintenance are simplified and less costly.
• Made to last they are dependability and reliability are built in.
• Available in fourteen sizes with maximum capacities from 150,000 to 20,000,000 Btu/hr.
• All models are available for use with preheated combustion air.

Our range of immerso jet burner are designed for high performance and convenience. These burners fire at high capacities through a small diameter immersion tube. The combustion gases from the burner scrub the inner tube surfaces to produce the highest heat transfer rate of any immersion burner available.

Some of the features of the our range of burner include:

• Produces the industry's highest heat capacities and efficiencies.
• Tube requirements save valuable space inside the tank.
• Comes mounted with a reliable low or high pressure blower for ease of installation.
• Quickly transfers heat to the immersion tube, resulting in lower burner surface temperature.
• Provides faster heat-up times than any other immersion burner.
• Combustion chamber is outside the tank, taking up less space and providing more uniform heat.
• Unique nozzle design ensures quiet operation.

We offer a wide range of vortometric burner, which is designed to deliver rugged dependability, high output and low emissions. Some of the features of our range of burner include:

• Are built to fire light and heavy fuel oils and almost any industrial gas -- including propane, butane, manufactured and mixed gases -- to extremely high outputs.
• They feature a high combustion air swirl rate that produces a stable flame with high turn down capabilities.
• Low levels of NOx and CO emissions.

Our range of tube firing burner is designed to fire radiant and immersion tubes with inputs from 25,000 to 2,000,000 Btu/hr. Our range of TFB burner have the following features:

• A unique nozzle creates an intense adjustable-length flame with a vigorous spinning action.
• The long, spiraling flame results in cleaner combustion, efficient heat transfer and more uniform tube temperatures.
• The flame scrubs the inside of the fire tubes to remove the gas film boundary layer and increase heat-transfer effectiveness with outstanding temperature uniformity.
• Contribute to longer tube life, they also ensure consistent uniform product processing.
• Low NOx and low CO.
• Low excess air capability for high efficiency.
• Low air and gas pressure requirements.
• High heat transfer at low noise levels.
• Reliable ignition at a wide range of firing rates.
• Can be fitted with Eclipse Bayonet-Ultra recuperators for maximum system efficiency.

We offer a wide range of flue fire burner, which is specially designed for supplemental firing of co generation and combined-cycle installations. In power generation stations, the exhaust gases from gas turbines contain a significant quantity of energy in the form of heat. This energy can be used either directly in heating processes or to generate steam, which can again drive steam turbines to generate more electricity.
Our range of flue fire burner have the following features:
• Designed the Flue Fire burner specifically for various purpose.
• It is an in-duct burner which can be located directly in the exhaust gases between the turbine and waste heat boiler.
• The burner is also suitable for fresh air operation or incineration applications.

Our company manufactures a wide range of mark IV burners, which are packaged, nozzle-mixing, combination gas/oil burners for use in process heating applications with specific emphasis on ovens and dryers. Some of the features include:
• Most convenient models to use and operate.
• Used with any commercially available fuel gas and with fuel oils up to and including #2 oil.
• Used to dry paint (all colors), paper and paper products, cloth (all colors), food products, ink, laminates, packaging film, carpets and a wide variety of other products. I
• Capable of firing boilers, furnaces, incinerators, metal smelters and other equipment requiring a combustion block.
• Four burner sizes are available with maximum capacities from 1,000,000 to 5,000,000 Btu/hr.

Our range of deep spiral flame (DSF/DSF-CGO) burner are used not only on new furnaces, but to increase work capacity on existing installations. These burners are a sealed nozzle mixing flat flame burner. Due to its unique construction, the flame follows the contour of the combustion block and surrounding furnace wall with virtually no forward velocity. This permits the burner to be placed close to the work load without producing flame impingement or hot spots in front of the burner and provides uniform heating over a large area.
Some of the features of our range of burner include:
• Little forward flame travel.
• Easy fuel changeover.
• Provision for piloting and flame monitoring.
• Can operate with excess fuel or excess air.
• Short flame travel permits full use of furnace space.
• Evenly distributed radiation from combustion block and wall promotes temperature uniformity
• Turn downs up to 10:1 depending on model.
• Spiral flame pattern maintained at all firing rates.
• Exceptional flame stability.

The ExtensoJet is a nozzle-mix burner that is designed to fire an intense stream of hot gases through a silicon tipped extended combustor using ambient combustion air. The ExtensoJet was designed to extend through the kiln wall to significantly increase hot gas penetration and circulation of the products of combustion.
The high velocity of the gases improves temperature uniformity, product quality and system efficiency. The gas velocity can be as high as 500/ft/s. The combustor comes in varying lengths from 20 inches to 56 inches.
The burner features:

• On-Ratio control
• Direct Spark Ignition
• Flame Rod Supervision
• Multiple Fuel Capability

Our company manufactures the best Bayonet-Ultra recuperators. Exclusive multi-tube design delivers fuel savings up to 30%!
·     Bayonet-Ultra recuperators are high efficiency heat exchangers designed to fit into the exhaust leg of single, U, O, W or Trident-type radiant tubes. They're frequently paired with Tube Firing burners and suitable for use with exhaust streams up to 2100 Degrees Fahrenheit provide fuel savings up to 30%.
·     Conventional recuperators have only one heat transfer tube. Each Bayonet-Ultra contains multiple tubes to dramatically increase the heat transfer area while significantly decreasing the amount of fuel required to maintain required heat levels. Plus, an air cooled housing cools the work area
 

We offer a wide range of RHT Indirect Air Heaters are designed to heat recirculating ovens and dryers where the products of combustion must be isolated from the process air stream. They are also excellent for use in industrial space heating systems.

Some of the features include:
• These burners feature an industry-proven burner
• Firing chamber and exhaust tubes assembled as a single unit for easy installation.
• Optimum performance.