Nature of Business
Exporter and ManufacturerTotal Number of Employees
Upto 10 PeopleYear of Establishment
2008Legal Status of Firm
Limited Company (Ltd./Pvt.Ltd.)Annual Turnover
Rs. 1 - 2 CroreImport Export Code (IEC)
04090*****GST Number
33AACCE1099C1Z2Usage/Application | Sewage Treatment |
Packaging Details | 50 kg Drum |
Physical State | Liquid |
Deliver Type | PAN India |
Country of Origin | Made in India |
Ecoclean-2300 is a uniquewater treatment formulation developed by ECOHEALTH PRODUCTS PVT LTD, Chennai, which has the dual function of flocculation/coagulation of suspended organic matter in waste water and disinfection of the water through total eradication of pathogenic bacteria including Fecal coliforms and E-coli.
It is a combination of herbal extracts (Neem, Thulasi, Moringa and Cleani ng Nut) with proven water-purifying capabilities, bound together using a water- soluble organic solvent. It is totally non-toxic and safe to use.
Used at very low dosages of 50 ppm (50 ml for 1000 litres), it causes flocculation and sedimentation of sludge and also kills harmful bacteria including fecal coliforms and E-coli, bringing the water to potable grade after filtration with sand and carbon filters.
The treated water has low BOD and COD; it does not have an offensive odour; it is clear and has low TSS; it contains no harmful salts and conforms to all the standard parameters for re-usable grade water set by the World Health Organisation and the Central Pollution Control Board of India.
Extremely cost-effective with the reagent cost working out to less than 3 paise per litre of sewage. Since a very small footprint is required, there is a huge saving on space. Since the requirement for 24x7 aeration is not there, there is considerable savings on electrical power, making it a Green Technology. Huge savings on infrastructure as the whole process is simple and eliminates the need for multiple tanks and clarifiers.
Allowing for the mental block to drinking treated sewage water, this water can be used for all secondary purposes like :
- Flushing
- Washing of vehicles and pathways
- Washing and swabbing of floors
- Gardening and irrigation
- Construction
- Industrial uses such as boiler coolant
- AC Plants, etc
The dosing process is extremely simple and can also be built into existing STPs with minimal infrastructural changes. It can also be designed as an exclusive Eco-Tec Process design which will cost less than half of the conventional treatment plant.
Additional Information:
- Delivery Time: 20 Days from the day
- Packaging Details: 25 KG Can
View Complete Details
Plant Capacity | More than 5000 LPH |
Water Source Type | Industrial Wastewater |
Application Industry | Water treatment |
Deliver Type | PAN India |
Country of Origin | Made in India |
The most commonly used chemicals for acid neutralization are Hydrated Lime (CaOH) or 50% Sodium hydroxide. In many cases these are very good choices. However, there are many considerations when selecting chemicals and these may not always be the best choice.
An acid must be neutralized with a base, which, by definition, is characterized by an excess of Hydroxide ( OH-) ions. The selection of the chemicals used for the neutralization of a base is almost as important as the design of the neutralization system. There are many considerations ranging from health and safety to cost and convenience of operation. Some of the major points to consider in the selection of chemicals are listed below:
· Health and Safety
· Cost and Convenience
· Storage and Location
· Health and Safety: Whenever mixing chemicals extreme caution must be exercised. Hazardous or noxious reactions may occur. For example: adding any acid to a cyanide bearing solution will result in the release of deadly HCN gas. Due to the complexity of the myriad of processes that are run in industry, most of which are either proprietary or undefined, Digital Analysis usually cannot comment on suitability of an acid or base selection for the neutralization of a wastewater stream. Although adverse reactions are very rare, the possibility exists and must be considered. The problem is even more complex when neutralising effluent water in a CETP with inflows from multiple industrial units. Sodium hydroxide (Caustic soda) is by nature caustic. It has to be handled with adequate protective gear, failing which, the handlers could suffer severe lesions of the skin.
· Cost and Convenience: Most acids and bases will work in most applications.
Therefore the determining criteria are usually cost and convenience. For neutralising high alkaline water, Sulfuric acid (H2SO4), for example, can be purchased in concentrations ranging from near 0% up to 98%. If a 55 gallon drum of 50% sulfuric is purchased, obviously half of that purchase cost was for water. Higher concentrations are generally less expensive. Neutralising a cationic effluent using Caustic soda, though relatively less expensive, drastically increases the TDS of the water and also increases COD beyond the permissible levels for safe discharge. As a result, what is gained in the reagent cost is expended in the treatment cost.
Additional Information:
- Delivery Time: 20 Days from the day receiving the payment
- Packaging Details: 25 KG Can
View Complete Details
HSN CodeHSN Description
29420090Other organic compounds - other organic compounds : other
- Developed and Managed by IndiaMART InterMESH Limited