X
Hi
terms privacy policy
Verifying...
1

Have a requirement?
Chat with us

Hi
terms privacy policy
Verifying...
1

Have a requirement?
Chat with us

Laminators

Pioneers in the industry, we offer Photovoltaic Module Laminator from India.

Interested in this product?
Get Best Quote
The Ecolam 05 MAXI S is an automatic photovoltaic module laminator and it has been designed to allow a production in series of the photovoltaic modules with the possibility to have a modular solution of laminator. The lamination cycle permits to laminate with a continuous temperature of 180 °C which permits an use of ultra fast cure EVA.
The laminated modules pass the certification IEC 61215. Ecolam 05 MAXI S is capable to laminate not only standard photovoltaic modules but also particular architectonic modules as prismatic glass, double glass, transparent back sheet and flexible modules.

It can also be used for the lamination of coloured plasma screens. The lamination cycle is automatic and controlled by a PLC. The operator interacts with the programming through the touch screen where it is possible to control the cycle in order to see the temperature or the vacuum values.

Characteristic
  •     Possibility to work with a continuous work temperature of 180°C
  •     Possibility to set different temperatures in 12 different zones
  •     Different level of vacuum in the chambers is settable from the touch-screen for different types of modules
  •     All parameters are settable from the touch-screen
  •     Troubleshooting directly on the touch-screen with alarm message
  •     The touch-screen visualizes a diagram with all vacuum and temperatures values
  •     Low energy cost
  •     Long lifetime of the silicone membrane
  •     Membrane change in less than 20 minutes with quick clamp system with plates in working temperature
  •     External pump housing composed one principal vacuum pump, one back up vacuum pump and a special filter to absorb the EVA gasses for a full ambient respect
  •     Internal booster pump to improve and reduce the pumping time
  •     Automatic release sheet in Teflon on both sides of the modules
  •     Cooling system at close circuit for vacuum pump as standard
  •     Alarm message when maintenance is needed
  •     This machine has very little need of maintenance and all maintenance work can be performed by the operator without calling Ecoprogetti’s technicians
  •     Quick remote assistance and supervision via internet
Optional
  •     Cooling of the modules on the unload belt


Additional Information:

  • Item Code: 05MAXIS

View Complete Details

Yes, I am interested!

Interested in this product?
Get Best Quote

The laminated modules pass the certification IEC 61215. Ecolam 08 is capable to laminate not only standard photovoltaic modules but also particular architectonic modules as prismatic glass, double glass, transparent back sheet and flexible modules.It can also be used for the lamination of coloured plasma screens. The lamination cycle is automatic and controlled by a PLC. The laminated modules pass the certification IEC 61215. ECOLAM 08 is capable to laminatenot only standard photovoltaic modules but also particular architectonic modules as  prismatic glass, double glass, transparent back sheet and flexible modules.It can also be used for the lamination of coloured plasma screens. The lamination cycle is automatic and controlled by a PLC.
The operator interacts with the programming through the touch-screen where it is possible to control the cycle in order to see the temperature or the vacuum values.

Characteristic

  •     Possibility to work with a continuous work temperature of 180°C
  •     Possibility to set different temperatures in 12 different zones
  •     Different level of vacuum in the chambers is settable from the touch-screen for different types of modules
  •     All parameters are settable from the touch-screen
  •     Troubleshooting directly on the touch-screen with alarm message
  •     The touch-screen visualizes a diagram with all vacuum and temperatures values
  •     Low energy cost
  •     Long lifetime of the silicone membrane
  •     Membrane change in less than 20 minutes with quick clamp system with plates in working temperature
  •     Automatic module centring
  •     Automatic load and unload system
  •     Automatic release sheet in Teflon on both sides of the modules
  •     Booster pump included as standard
  •     Cooling system at close circuit for vacuum pump as standard
  •     Alarm message when maintenance is needed
  •     This machine has very little need of maintenance and all maintenance work can be performed by the operator without calling Ecoprogetti’s technicians
  •     Quick remote assistance and supervision via internet

Optional

  • Cooling of the modules on the unload belt

 

 

View Complete Details

Yes, I am interested!

Interested in this product?
Get Best Quote
The Ecolam 08 S is an automatic photovoltaic module laminator and it has been designed to allow a production in series of the photovoltaic modules with the possibility to have a modular solution of laminator. The lamination cycle permits to laminate  with a continuous temperature of 180°C which permits an use of ultra fast cure EVA.

The laminated modules pass the certification IEC 61215. Ecolam 08 S is capable to laminate not only standard photovoltaic modules but also particular architectonic modules as prismatic glass, double glass, transparent back sheet and flexible modules. It can also be used for the lamination of coloured plasma screens. The lamination cycle is automatic and controlled by a PLC.

The operator interacts with the programming through the touch screen where it is possible to control the cycle in order to see the temperature or the vacuum values.

Characteristic
  •     Possibility to work with a continuous work temperature of 180°C
  •     Possibility to set different temperatures in 12 different zones
  •     Different level of vacuum in the chambers is settable from the touch-screen for different types of modules
  •     All parameters are settable from the touch-screen
  •     Troubleshooting directly on the touch-screen with alarm message
  •     The touch-screen visualizes a diagram with all vacuum and temperatures values
  •     Low energy cost
  •     Long lifetime of the silicone membrane
  •     Membrane change in less than 20 minutes with quick clamp system with plates in working temperature
  •     External pump housing composed one principal vacuum pump, one back up vacuum pump and a special filter to absorb the encapsulation material gasses for a full ambient respect
  •     Internal booster pump to improve and reduce the pumping time
  •     Automatic release sheet in Teflon on both sides of the modules
  •     Cooling system at close circuit for vacuum pump as standard
  •     Alarm message when maintenance is needed
  •     This machine has very little need of maintenance and all maintenance work can be performed by the operator without calling Ecoprogetti’s technicians
  •     Quick remote assistance and supervision via internet
Optional
  • Cooling of the modules on the unload belt

View Complete Details

Yes, I am interested!

Interested in this product?
Get Best Quote
The Ecolam 05 Maxi is an automatic photovoltaic module laminator and it has been designed to allow a production in series of the photovoltaic modules with the possibility to have a modular solution of laminator.

Characteristic :
  • Different level of vacuum in the chambers is settable from the touch-screen for different types of modules
  • All parameters are settable from the touch-screen
  • Troubleshooting directly on the touch-screen with alarm message
  • The touch-screen visualizes a diagram with all vacuum and temperature values
  • Low energy cost
  • Long lifetime of the silicone membrane
  • Automatic module centring
  • Automatic load and unload system
  • Membrane change in less than 20 minutes with quick clamp system with plates in working temperature
  • Release sheet in Teflon on both sides of the module
  • Alarm message when maintenance is needed
  • This machine has very little need of maintenance and all maintenance work can be performed by the operator without calling Ecoprogetti’s technicians
  • Quick remote assistance and supervision via internet
Optional
  • Dry pump
  • Cooling of the modules on the unload belt

View Complete Details

Yes, I am interested!
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
terms privacy policy