We offer a wide range of gas & fuel oil burners, which are available in various models namely E01E, EL02/03B, EK3 / 4 / 5 and EK6 / 7 / 8 / 9. These models are available for different working specifications of programs, power, penetration, head, type range operating mode diameter and operating modes. The specifications are provided as follows:

• Blown-Air Fuel-Oil Burner with mechanical
atomization
• Monobloc structure
• Centered combustion tube, fastened on the
front wall of the generator by a sliding
clamp
• Ergonomic design allowing easy access to
inner components
• Support plate of components made of
synthetic material, which is easy to
remove and maintain
• Closing of air shutter in stopping
condition by return spring
• Fan characteristics adjustable at the
level of the air inlet without removal
• Complete electrical wiring
• Electronic control for monitoring and
security with warning light
• Flame control by removable photo resistive
cell
• Meet the requirements of EN267, EN60335,
EN55014, EN55104 standards

We are the authorized stockiest of Landis & Gyr (Siemens) products. These are top quality combustion control products, which offer safe and efficient operation. Our range includes:

• Gas Burner Sequence Controllers LGB, LMG, LFE, LFL, LGK
• Oil Burner Sequence Controllers LOA, LAL, LMO, LOK , LAE
• Flame Safe Guard for oil LAE 10, Flame safe guard for gas LFE 10 , LFE 50
• Flame Detectors QRB1 QRB 3, QRC 1, QRA 2 , QRA 50, QRA 51 QRA 53/55
• Gas Valves VGD, VGF, VGG, VGH
• Servo Motors SQN, SQM
• Air Gas Ratio Controller SKP 50, SKP 70
• Valve Regulators SKP 1, SKP 27

We supply complete range of oil burner components made by Fluidics. The range includes:

• Oil Spray nozzle Type W1 / W2
• Simplex oil spray nozzles 0.25 - 50 GPH
• Burner guns
• Nozzle end plate & swirlers for regulating nozzles
• Air & steam atomising nozzles

We offer a complete line of products manufactured from Honeywell. These products are:

• Burner Controllers R4412, R7140 G, L, M
• Flame Detectors C7027
• Flame Amplifier R4343
• Gas Valves
• Pressure Regulators
• Pressure Switches
• Shutoff Valves
• Modulation Motors
• Process Controllers
• Recorders

We offer control and safety equipment for oil burners manufactured by Petercem. These are MA 810 & MA150. These controls are provided along with amplifier for flame detection. It utilizes the flame sensor with photo resistant cell Model 8205.

We manufacture gas train components manufactured from Kromschroder. These components are used for pressure regulation, shutoff and control of gas. The various components in this range are:

• Ball Valves
• Gas Filters GFK
• Pressure Regulator VGBF / GDJ
• Slam Shutoff Valves JSAV
• Safety Relief Valves VSBV
• Gas/Air Pressure Switches DG
• Solenoid Valve VG
• Air/Gas Ratio Controller GIK
• Gas Multibloc CG
• Valve Proving System TC
• Burner Management Systems
• Manometers

We offer a wide range of gas train components made by Dungs. These components are used for pressure regulation and control of gas. Our range includes:

• Gas Filters GF
• Ball Valves
• Pressure Regulator FRS
• Gas/Air Pressure Switches
• Safety Relief Valves
• Gas Multibloc MB DLE
• Solenoid Valve MVD
• Double Solenoid Valve DMV D
• Burner Management Systems
• Manometers
• Valve Proving System VPS

We are supplying superior quality combustion control products manufactured by Satronic. These products offer safe and efficient operation. Our range includes:

• Oil Burner Sequence Controllers TF 801, TF 802, TF 804, TF 832, TMO 720.
• Gas Burner Sequence Controllers TFI 812, MMI 811/ 812/813, MMG 810/ 811, TMG 740.
• Flame Detectors FZ 711, MZ 770, IRD, UVZ 780, UVD 970, UVD 971.

We are the authorized stockiest of fuel oil gear pumps manufactured by Suntec. Used in industrial applications, we offer 400 models of fuel pumps for both light and heavy oil with capacity up to 4000 liters per hour. These pumps are suitable for low, medium and high capacity burners for a range between 10 KW to 30,000 KW.

Suntec pump models are listed below:

1) AN 47A - AN 97 C	2) AE 35 C – AE 77 C
3) AS 47A - AS 67 C	4) AP 47A - AP 67 C
5) AL 30 C - ALE 55 C	6) AT 2 45 A- AT 3 65 D
7) D 45 B - D 67 C	8) AJ 4 AC - AJ 6 DC
9) J3 CAB - J7 CCC	10) E4 NA - E7 NC
11) TA 2A - TA5C	12) T 2 C - T 5 C

We are the authorized stockiest of high voltage ignition transformers and ignition electrodes for oil and gas burners made by Beru, Germany. Ignition transformers are available for continuous and intermittent application for ignition of oil and gas Burners. Light in weight and compact is size, these transformers are available in different specifications.