Eco water's reverse osmosis systems incorporate the highest quality components. The system design emphasizes on reliability, affordability, ease of operation and system expandability.
Reverse osmosis (RO) systems offered by Eco water Solutions Technologies Pvt. Ltd. produce high quality permeate water from seawater, municipal and well water. The production rate is based on feed water at 25°C, with turbidity of less than 1 NTU and silt density index (SDI) of less than 5.

How does it work ?
The reverse osmosis process uses semi permeable spiral wound membranes to separate and remove dissolved solids, organic, pyrogens, sub micron colloidal matter and bacteria from water. Feed water is delivered under a pressure of approximately 16 kg/cm2 through reverse osmosis membranes. Water permeates the minute pores of the membrane and is delivered as purified water. Impurities in the water are concentrated in the reject stream and flushed to the drain. Reverse osmosis is capable of removing 90-99% of total dissolved solids (TDS), 99% of organic (including pyrogens), and 99% of all bacteria in the feed water.

The impurities are concentrated as the feed water passes through the reverse osmosis system and flows over the membrane. Impurities removed from the feed water are concentrated either in the concentrate, or in the reject stream. As impurities concentrate, they may reach saturation or precipitate. The operator must be certain that impurities in the feed water are not concentrated enough in the RO membranes to cause precipitation because precipitation can ruin the membranes .

Eco-Water Solutions has filtration plant available to solve all problems of suspended solids. Our filter plants has the following filtration media:

• Graded sand/gravel
• Sand/Anthracite
• Activated carbon
• Iron/Manganese removal media.
• The Derwent range of standard filter vessels are conservatively sized to give flow loadings per square metre of filter bed, ensuring improved and reliable filtration.

The units are available with either:
» Well-proven 5-cycle corrosion-resistant multi-port valve Or manifold with individual control valves.
» The units can be in simplex, duplex or multiple combinations.
» Triplex combinations allow two filters to provide backwash water for the third filter, which often eliminates for large storage of clean water for backwash.

The filtration process is controlled from a central control panel complete with warning lights and an engraved mimic on which lamps show the service state of all items. The panel houses- circuit breakers, motor starters and level switches and PLC.

At EcoWater, the Swimming Pool Filtration Systems will keep the swimming pool water clean, comfortable and enjoyable. We ensure best in terms of quality, compliance and cost. All systems are built with an exclusive modular design that allows for quick and simple inspection and cleaning of cells. These system allow for simple "in field" removal and re-installation of individual components without having to call for the services of an electrician or plumber.
Our advanced Swimming Pool Filtration Systems are custom designed and built to fit each individual application.

Advantages

• Environmental Friendly
• Automatic Cell Cleaning
• Maintain Peak Cell Life
• High Purifier Production Efficiency
• Energy Efficient

PRESSURE BOOSTER SYSTEM consists of an automatic pressure controlled pump and a tank, which contains an air filled poly-ether-urethane (PEU) bladder. The water gets pumped in this tank that compresses it and pressurizes the bladder, which in turn maintains a desired pressure within the whole water system. This automatic system requires no manual intervention and is built for low maintenance.

Features

• Automatic operation of the system, providing water under pressure whenever required.
• Paradise Home Pressure booster system will work in homes with and without the overhead tank. They can replace the overhead tank, provided continuous power is available.
• The composite material (FRP) tank ensures that the vessel never corrodes and no harmful traces of metal (as in steel tanks) pass into the water. The tank is made of Food & Drug Administration (FDA) and National Sanitation Federation (NSF) listed materials, thus are environmentally safe.

Benefits

• Consistent water pressure on all floors
• Pressurized full flow shower
• Consistent water flow in bathtubs, dishwashers, showers and garden hose
• The modern fittings like mixers require an optimum pressure to function efficiently. Since this pressure is normally not available with an overhead tank, the booster system makes the presence of such fittings more meaningful.
• Complete and efficient management of water pressure.