EEWA produces continuous Belt Sealer for seal bags, pouches with greater speed and output. This type of sealers are ideal for sealing plastic bags of virtually any size and length. The built in adjustable speed conveyor belt carries the loaded bag through the sealer. The bags lay flat on the conveyor with the horizontal models. With vertical band sealers bags are sealed in a "standing position" which is ideal for packaging bags containing spillable items such as powders, liquids, grains, etc. These sealers consist of a frame, on/off switch, speed regulator, cooling fan, electronic temperature controller, drive & adjustable conveyor and sealing. The PTFE Non Stick sealing bands, drive belts and conveyor belt are controlled by one motor. When the on/off switch is turned on, the temperature controller begins heating the sealing blocks. The temperature setting and the speed setting will depend on the type and thickness of material being sealed. The bag will pass through the sealing blocks, cooling blocks and embossing wheel before being dropped out the end sealed.
Belt sealers are easy to operate. Turn on the power & fan and set the temperature on the temperature controller. When the preset temperature has been reached, place the bag at the positioning plate bag guide. The sealing bands carry the bag through the unit to seal the bag. Sealed bag is released at end of sealer. No pushing or pulling is required.
Standard Features:
Seal bags, pouches etc. with greater speed and output
Sturdy and heavy duty construction
Ideal for round the clock production run
Can seal all types of bags including heavy duty PE bags and poly laminated pouches
Different height of bags can be sealed by slight adjustment
Direct Heat Sealing Machine Or Hot Bar Type Sealing Machine CD Series EEWA produces Direct Heat Sealing Machine or Hot Bar type Sealing Machine, designed for light duty packaging application. Accurate thermostat controls, sealing temperature of upper & lower jaws for strong, attractive water tight seal. These machines seal all types of laminated films in wide variety of thickness and are also suitable for making empty pouches, production speeds vary according to the type & thickness of film used and operator's skills.
Standard Features
Manual foot pedal operated
Seals aluminum foil and any poly laminated film pouches quickly and efficiently.
Seals materials up to 20" wide (model dependent).
Seal width is 10mm- 12.5mm
Hot Bars available in plain, serrated type, lining design
Heat controlled by the accurate electronic, thermostatic and precision components
Disposable Pe Hand Gloves Making Machine ( MODEL PSA 3 DIE)
In the Disposable Hand Gloves Making Machine range, EEWA also produces Pneumatically Powered Machine for high production. Roll Guide is provided on the back side of the Sealing Jaw for the insertion of film roll. This will enable the operator for easy movement of film on the sealing jaw.
Standard Features:
Pneumatic Semi-Automatic operation
Film feeding manually
Film roll guide
Available with single, two or three cavity die
For making standard size and veterinary hand gloves
Designed for mass production
Easy to operate. Simply set the timer, insert the film between the sealing die and press the foot switch.
EEWA produces Foil & Cap / Lid Sealer useful for sealing cap, foil on plastic bottle, jar, cup and container. This is manual hand press machine and simple in operation. Heat controlled by the accurate thermostatic controls. In Manual Hand Press Machine, four models are available;
These manual, Foot Pedal Operated Impulse Sealer designed for with unobstructed jaw to close vertically standby bags. The easy access into and out of the trim sealing jaws makes it convenient for the operator to bring the filled bags to and from the machine. The machine seals air tight / water tight sealing of polyethylene and thermoplastics bags used for packing liquid products like ghee, milk, soft drink and other various products.
Standard Features:
Seals polyethylene bags and any thermoplastic materials quickly and efficiently.
Seals materials up to 12" wide
Seal width is 2 mm- 3 mm- 5mm
Two Parallel seals on request
Equipped with a plug-in electronic timer and easy to use adjustment knob. Adjusting the sealing time provides for different material thickness.
Light indicates when seal is done. Once the correct time is set, the sealer will provide a perfect, consistent, flat seal every time.
Easy to operate. Simply set the timer, insert bag between the sealing bars, press down on the foot pedal, and release.
Foot Pedal Operated Sealer & Trim Sealer FO Series
These manual, Foot Pedal Operated Sealers & Trim Sealers are designed for packaging applications, small quantity and occasional sealing applications. The Dwell Timer Control system controls an indicator light which signals the operator separately for sealing and cooling cycle which allows the operator for releasing the foot pedal opens the sealing jaw. These machines seal polyethylene and other thermo-plastic films. Production speeds vary according to the type and thickness of the film and operator's skill.
Standard Features
Seals polyethylene bags and any thermoplastic materials quickly and efficiently.
Seals materials up to 40" wide (model dependent)
Seal width is 2 mm- 3 mm- 5mm
Two Parallel seals on request
Equipped with a plug-in electronic timer and easy to use adjustment knob. Adjusting the sealing time provides for different material thickness.
Light indicates when seal is done. Once the correct time is set, the sealer will provide a perfect, consistent, flat seal every time.
Easy to operate. Simply set the timer, insert bag between the sealing bars, press down on the foot pedal, and release.
These manual, Foot Pedal Operated Sealers are designed for packaging applications, small quantity and occasional sealing applications. The Dwell Timer Control system controls an indicator light which signals the operator separately for sealing and cooling cycle which allows the operator for releasing the foot pedal opens the sealing jaw. These machines seal polyethylene and other thermo-plastic films. Production speeds vary according to the type and thickness of the film and operator's skill.
Standard Features:
Seals polyethylene bags and any thermoplastic materials quickly and efficiently.
Seals materials up to 24" wide (model dependent)
Seal width is 2 mm- 3 mm- 5mm
Two Parallel seals on request
Equipped with a plug-in electronic timer and easy to use adjustment knob. Adjusting the sealing time provides for different material thickness.
Light indicates when seal is done. Once the correct time is set, the sealer will provide a perfect, consistent, flat seal every time.
Easy to operate. Simply set the timer, insert bag between the sealing bars, press down on the foot pedal, and release.
This very easily operated Desktop Impulse Sealer is and absolutely necessary help in every case, when there is anything to be packed or bags to be sealed. The desktop machine is appropriate for sealing Thermoplastic material.
Heavy Duty Pneumatic Powered Sealer & Trim Sealer PSA HD Series EEWA produces Heavy Duty Pneumatic Powered Sealers and Trim Sealers for making extra long heat seals and sealing high temperature materials and very thick or multiple layers of various films and laminated. The welded rectangular structural frame provides the structure stability necessary to make seals for a big size bag / sheets or very wide seals are possible. Films can be fed from the front or back of the machine and passed between the sealing jaws for an uninterrupted with the open back design. The machine will be available in 50” to 120” sealing length or as per request.
Standard Features:
Pneumatically controlled semi-automatic operated
Seals polyethylene bags and any thermoplastic materials quickly and efficiently.
Seals materials up to 120" wide (model dependent)
Seal width is 2 mm- 3 mm- 5mm- 7mm
Two Parallel seals on request
Equipped with a plug-in electronic timer and easy to use adjustment knob. Adjusting the sealing time provides for different material thickness.
Equipped with a plug-in electronic timer and easy to use adjustment knob. Adjusting the sealing time provides for different material thickness.
Light indicates when seal is done. Once the correct time is set, the sealer will provide a perfect, consistent, flat seal every time.
Easy to operate. Simply set the timer, insert bag between the sealing bars, press down on the foot witch, and release.
This LAB 150 Model is designed as a versatile Laboratory Instrument for use by film manufacturers, package engineering department and other laboratories or agencies who involved in the development of heat sealing specifications for various types of flexible thermoplastic materials.
Standard Features:
Pneumatically controlled and automatic + manual type
Table floor mounting type model
Direct heat seal type machine suitable for to seal any poly laminated film materials
150mm length sealing jaw
Jaw width 5mm
M.S. chrome plated jaws of continuous sealing in both upper & lower jaws in plain / serrated or lining design
Digital temperature indicating controller of 0 to 300 degree centigrade with PID action with an accuracy of +/- 0.1 degree centigrade
The 600 LAB Model Thermal Impulse Heat Sealer is a fully instrumented Laboratory device for analyzing the heat sealing properties of all films, foams, fabrics, It is pneumatically powered and electrically operated machine. Panel instruments accurately indicate jaw temperature and pressure heat and dwell times and heater element voltage and current. All controls are located behind the sealing jaws within easy reach and are designed for quick adjustment, enabling the operator to conveniently develop the best formula for sealing any thermoplastic material.
The 600 LAB is designed as a versatile laboratory instrument for use by film manufacturers, package engineering department and other laboratories or agencies who involved in the development of heat sealing specifications for various types of flexible thermoplastic materials. This machine also suitable for sample making & pilot production runs.
Standard Features
Pneumatically powered semi + fully automatic system
Analyzing the salability of any type of thermoplastic material including very thick or thin and high temperature materials such as LDPE, LLDPE, HDPE, PVC, PP, BOPP, Nylon , HMHDPE and also Laminated films such as aluminium poly, polyester poly , BOPP poly etc. and more over multilayer film also.
Consist with electronic dwell timer, temperature and pressure indicator as well as voltage ampere indicator
Adjustable sealing parameters ; jaw pressure, temperature , voltage heat impulse time & cooling time
Heating jaws are available in plain, serrated and lining design impression
Impulse heating electrodes available from 1 mm to 5 mm width and also in round shape
The Portable Hand Held Impulse Sealer is ruggedly constructed, light weight, and is designed for packaging and fabricating applications where the sealing jaws must be brought to the work. Impulse heated portable hand sealer for packing / closing of film bags and sacks, for manufacturing of water and air tight transport- and sea packing, packing of bulky machinery, control cabinets, measuring units, various small items etc. The sealing jaws are built with a positive locking “vise” grip for strong holding pressure during the sealing cycle.
This series of heat sealers are available in two different working lengths to fit your packaging needs. The features listed below are for the standard sealer configuration.
Standard Features
Seal width: 3 mm, 5 mm, 7 mm
Seal lengths: 9”, 12”
Single sided heater bar with opposing pressure bar (optional bi-active-both jaws heated - call for quote)
The Hand operated economy Impulse Bag Sealers are great for quick, easy, nice-looking seals at an economy price. Ideal for start-up or low-production needs where large packaging equipment is not appropriate. Available in 2 sizes to meet a wide range of packaging applications. Available with standard 2mm or 3mm wide seal.
Standard Features: Compact Light weight Simple and easy to use Variable sealing setting No heat up time required
Semi- Automatic Foot Switch Operated Sealer & Trim Sealer
Semi- Automatic Foot Switch Operated Sealer & Trim Sealer PSA LD Series EEWA produces Semi-Automatic Foot Switch Operated Sealers & Trim Sealers are designed for packaging applications, small quantity and occasional sealing applications. The dwell timer control system controls an indicator light which signals the operator separately for sealing and cooling cycle. Every pneumatic machine are provided with air cylinder, air filter, oil lubricator, and air gauge with suitable capacity and proper range. These machines seal polyethylene and other thermo-plastic films.
Standard Features:
Pneumatically controlled semi-automatic operated
Seals polyethylene bags and any thermoplastic materials quickly and efficiently.
Seals materials up to 40" wide (model dependent)
Seal width is 2 mm- 3 mm- 5mm
Two Parallel seals on request
Equipped with a plug-in electronic timer and easy to use adjustment knob. Adjusting the sealing time provides for different material thickness.
Light indicates when seal is done. Once the correct time is set, the sealer will provide a perfect, consistent, flat seal every time.
Easy to operate. Simply set the timer, insert bag between the sealing bars, press down on the foot witch, and release.
Semi- Automatic Foot Switch Operated Direct Heat Sealer
Semi- Automatic Foot Switch Operated Direct Heat Sealer PSA CD Series EEWA produces Semi-Automatic Foot Switch Operated Direct Heat Sealer designed for packaging applications, small quantity and occasional sealing applications. Accurate thermostat controls, sealing temperature of upper & lower jaws for strong, attractive water tight seal. These machines seal all types of laminated films in wide variety of thickness and are also suitable for making empty pouches. Every pneumatic machine are provided with air cylinder, air filter, oil lubricator, and air gauge with suitable capacity and proper range.
Standard Features:
Pneumatically controlled semi-automatic operated
Seals aluminum foil and any poly laminated film pouches quickly and efficiently.
Seals materials up to 20" wide (model dependent).
Seal width is 10mm- 12.5mm
Hot Bars available in plain, serrated type, lining design
Heat controlled by the accurate electronic, thermostatic and precision components
Semi- Automatic Foot Switch Operated Direct Heat Sealer
Semi- Automatic Foot Switch Operated Direct Heat Sealer PSA CD LD Series EEWA produces Semi-Automatic Foot Switch Operated Direct Heat Sealer designed for packaging applications, small quantity and occasional sealing applications. Accurate temperature controller controls, sealing temperature of upper & lower jaws for strong, attractive water tight seal. These machines seal all types of laminated films in wide variety of thickness and are also suitable for making empty pouches. Every pneumatic machine are provided with air cylinder, air filter, oil lubricator, and air gauge with suitable capacity and proper range.
Standard Features
Pneumatically controlled semi-automatic operated
Seals aluminum foil and any poly laminated film pouches quickly and efficiently.
Seals materials up to 20" wide (model dependent).
Seal width is 10mm- 12.5mm
Hot Bars available in plain, serrated type, lining design
Heat controlled by the accurate electronic, thermostatic and precision components
Semi- Automatic Foot Switch Operated Sealer & Trim Sealer
Semi- Automatic Foot Switch Operated Sealer & Trim Sealer PSA Series EEWA produces Semi-Automatic Foot Switch Operated Sealers & Trim Sealers are designed for packaging applications, small quantity and occasional sealing applications. The dwell timer control system controls an indicator light which signals the operator separately for sealing and cooling cycle. Every pneumatic machine are provided with air cylinder, air filter, oil lubricator, and air gauge with suitable capacity and proper range. These machines seal polyethylene and other thermo-plastic films.
Standard Features:
Pneumatically controlled semi-automatic operated
Seals polyethylene bags and any thermoplastic materials quickly and efficiently.
Seals materials up to 40" wide (model dependent)
Seal width is 2 mm- 3 mm- 5mm
Two Parallel seals on request
Equipped with a plug-in electronic timer and easy to use adjustment knob. Adjusting the sealing time provides for different material thickness.
Light indicates when seal is done. Once the correct time is set, the sealer will provide a perfect, consistent, flat seal every time.
Easy to operate. Simply set the timer, insert bag between the sealing bars, press down on the foot witch, and release.
Semi- Automatic Plastics Tube Filling, Sealing Machine Model : Exomatic - T 30 EEWA produces Pneumatically Operated Semi-Automatic Plastics Tube Filling, Sealing, Batch Coding, Trimming Machine.Major brand confidence in EEWA has enabled the company to become one of the world's leading manufacturer of Filling and Sealing Machines for Pharmaceutical and Cosmetic Products in Plastic Tubes.
To gain that rank and recognition in the world of Pharmaceutical and Cosmetic goods, in the demanding world of quality, the company has based its development on building up a relationship of trust with its customers.
EEWA produces Pneumatically Operated Plastic Tube Sealer is the economical model for sealing plastics tubes which are ideal for use in medical, cosmetic or any other medium volume production environment. This Tube Sealer is adaptable from the smallest to the largest size tubes and can seal thick or thin wall polyethylene or other thermoplastic collapsible tubes. While designing the machine, it has incorporated with Tube Testing Equipment, which indicates all sealing parameters like Sealing Time, Temperature, Pressure and Bursting Pressure of tubes and thus makes the machine as LAB Model.
We have developed this versatile type for the safe sealing of bags filled by heavy weight products. The rolling conveyor located before the machine enables the forwarding of heavy bags (max. 50 kg). The height of the machine installed on the frame can be adjusted to the size of the bag. The impulse sealing is initiated by pressing the mechanical foot pedal.
Standard Features:
Impulse sealer with powder painted housing
Sealing Length 620mm
One sealing wire
Sealing width 2-3-5 mm
Separately adjustable sealing and cooling time
Electric control of sealing and cooling time
Adjustment of sealing and cooling time is continuous
Opening of the sealing bar is braked by gas spring
Integrated sealing wire stretching unit
Integrated safety cutting knife
Frame made of aluminum profile
Mechanical foot pedal
Rolling conveyor made of aluminum profile with aluminum rollers
We have developed this versatile type for the safe sealing of bags filled by heavy weight products. The rolling conveyor located before the machine enables the forwarding of heavy bags (max. 50 kg). The height of the machine installed on the frame can be adjusted to the size of the bag. The impulse sealing is initiated by pressing the mechanical foot pedal.
Standard Features:
Width of Seal : 5mm
Length of Seal : 600mm, 700mm, 800mm
230 Volt Ac Operation
Adjustable Height In Frame
Aluminum Profile Construction
Electrically Control Of Sealing & Cooling Time
Separately Adj. Sealing & Cooling Time
Safety Cutting Knife
Rolling Conveyor Aluminum
Machine Overall Dimension : 1750mm X750mmx1495mm
Weight Of Machine 68-75 Kg
Material Can Be Sealed :PE/PP/PA/PVC-DOUBLE COATED FOIL/ PAPER FOIL/ ALUMINUM FOIL/COMBINE MATERIAL
Max Load Of 50 Kg
Mechanical Foot Pedal Operation for signaling, Pressing by Electromagnet
Opening Of Sealing Bar Is Break By Gas Spring
Optional Attachment
Parallel Sealing Of 5mm Is also Possible
Trimming After Sealing (For Better Finish Of Package)
Vertical Type Sealing Machine For Bulk Bag Sealing PSA VM With Conveyor EEWA developed this Versatile Vertical Type Sealing Machine for bulk bag sealing. The machine is electrically and pneumatically powered operating in continuous flow with synchronized conveyor belt. It can be used to close bags made of all heat sealable materials. Semi-automatic foot switch operated and impulse type sealing machine, suitable for sealing large bulk bag and also for plastics liner sealing. The impulse generator consists with electronic timer systems and all controls are built in separate box fitted on right side of machine. Seals many types of thermoplastics films / bags like PE, PP, LDPE, HM and HDPE adjustable temperature control to seal film of different thickness. Two parallel seals with adjustable height and nitrogen purging systems are available. Compressed air is required for this model.
Standard Features:
Pneumatically controlled semi-automatic operation
Horizontal jaw movement
Seals polyethylene bags and any thermoplastic materials quickly and efficiently.
Seals materials up to 40" wide
Seal width is 2 mm- 3 mm- 5mm. 7mm
Two Parallel seals on request
Consist with electronic dwell timer, temperature and pressure indicator as well as voltage ampere indicator
Adjustable sealing parameters, jaw pressure, temperature , voltage heat impulse time & cooling time
EEWA produces Vertically Mounted Sealers and Trim Sealers are so designed that the filled bag is moved under the sealing jaws by hand or conveyor standing at the machine. Operator pulls open end of the bag between the sealing jaws and then press the foot pedal of machine. It will make to close the jaw and start the sealing process.
These Machines are designed for bulk bags sealing. The production speeds vary according to the type and thickness of sealing bags and also the operators skill.
Standard Features:
Foot pedal press type
Horizontal jaw movement
Seals polyethylene bags and any thermoplastic materials quickly and efficiently.
Seals materials up to 40" wide
Seal width is 2 mm- 3 mm- 5mm
Two Parallel seals on request
Equipped with a plug-in electronic timer and easy to use adjustment knob. Adjusting the sealing time provides for different material thickness.
Light indicates when seal is done. Once the correct time is set, the sealer will provide a perfect, consistent, flat seal every time.
Easy to operate. Simply set the timer, insert bag between the sealing bars, press down on the foot pedal, and release.
Vertically Mounted Sealer & Trim Sealer PSA VM CD SERIES
EEWA produces Vertically Mounted Sealers and Trim Sealers are so designed that the filled bag is moved under the sealing jaws by hand or conveyor standing at the machine. Operator pulls open end of the bag between the sealing jaws and then press the pneumatic foot switch of machine. It will make to close the jaw and start the sealing process.
These Machines are designed for bulk bags sealing. The production speeds vary according to the type and thickness of sealing bags and also the operators skill.
Standard Features
Pneumatically controlled semi-automatic operation
Horizontal jaw movement
Seals aluminum foil and any poly laminated film bag quickly and efficiently.
Seals materials up to 40" wide (model dependent).
Seal width is 10mm- 12.5mm
Hot Bars available in plain, serrated type, lining design
Heat controlled by the accurate electronic, thermostatic and precision components
Vertically Mounted Sealers & Trim Sealer PSA VM SERIES
EEWA produces Vertically Mounted Sealers and Trim Sealers are so designed that the filled bag is moved under the sealing jaws by hand or conveyor standing at the machine. Operator pulls open end of the bag between the sealing jaws and then press the pneumatic foot switch of machine. It will make to close the jaw and start the sealing process
These Machines are designed for bulk bags sealing. The production speeds vary according to the type and thickness of sealing bags and also the operators skill.
Standard Features:
Pneumatically controlled semi-automatic operation
Horizontal jaw movement
Seals polyethylene bags and any thermoplastic materials quickly and efficiently.
Seals materials up to 40" wide
Seal width is 2 mm- 3 mm- 5mm
Two Parallel seals on request
Equipped with a plug-in electronic timer and easy to use adjustment knob. Adjusting the sealing time provides for different material thickness.
Light indicates when seal is done. Once the correct time is set, the sealer will provide a perfect, consistent, flat seal every time.
Easy to operate. Simply set the timer, insert bag between the sealing bars, press down on the foot switch, and release.
Ambica Engineers, Gujarat Engaged in manufacturing and exporting of cap sealing machines, automatic cap sealing machines, semi automatic cap sealing machines, washing machine, powder filling machine, liquid filling machine and capping machine.
Avatys Appliances Private Limited Exporting and manufacturing capping machine, automatic capping machine, electronic capping machine, seal machine, pouch seal machine, automatic seal machine, vertical seal machine, electronic seal machine and industrial seal machine.
Processing...
