We are trusted name in manufacturing all types of electrical panels which are widely used in various industries.

Types: -

1. Drawout & non-drawout panel.
   
2. Power factor improvement panel
   
3. Plc control panel.
   
4. Synchronizing panel (lt/ht) 11kv to 132 kv.
   
5. Starter panel [thyrostor]
   
6. Annunciation panel.
   
7. 11kv to 132kv control& relay panel.
   

Features: -

1. Siplex & duplex pattern.
   
2. Degree of protection :-ip-52 to ip-65.
   
3. Painting: - powder coating, spray paint, epoxy paint.
   
4. Compartmentalized design eliminates risk to maintenance personal.
   
5. Sufficient space for incoming and outgoing cables.
   
6. Separate busbar and cable chambers.
   
7. Fabricated with 2/2.5/3mm crca sheet steel.
   
8. Provided with buzzer & hooter for emergency.
   

Application :-
They are widely used in :-

1. Control & monitoring of entire electrical system of a plant / industry.
   
2. Protect against various electrical faults.
   
3. Better & smooth trouble free electrical life of various machines.
   

Our range of control & relay panel improves power factor to increase energy efficiency. All the specifications and requirements of the clients are taken into account and well complimented.

Features :-

1. Siplex & Duplex pattern.
   
2. Degree of Protection :-IP-52 to IP-65.
   
3. Electromechanical Relay / Numerical Relay.
   
4. Painting: - Powder Coating, Spray Paint, Epoxy Paint.
   
5. Compartmentalized design eliminates risk to maintenance personal.
   
6. Sufficient space for incoming and outgoing cables.
   
7. Separate Busbar and Cable chambers.
   
8. Servicing & maintenance of Relay available.
   
9. Fabricated with 2/2.5/3mm CRCA sheet steel.
   

Application :-
These are widely used for:

1. Protection and Control for Transformers.
   
2. Protection and Control for Transmission and distribution lines.
   
3. Protection and Control for Bus Section and Bus Coupler.
   

We offer a comprehensive range of control desks completely designed and manufactured by us for all types of Process Control Industries.

Features :-

1. Available in Floor mounting type.
   
2. Degree of Protection :-IP-52 to IP-65.
   
3. Painting: - Powder Coating, Spray Paint, Epoxy Paint.
   
4. Compartmentalized design.
   
5. Designed to accept 3-phase, 4 wire input volt.
   
6. Provided with buzzer & hooter during emergency.
   
7. Provided with 12/24 window annunciator for fault indication.
   

Application :-
These are widely used for :-

1. Control & monitoring of various electrical motors, loads etc. of an electrical system.
   
2. Protect against various electrical faults.
   
3. Better & smooth trouble free electrical life of various electrical machines.
   
4. Control Desk may save energy of an electrical system.
   

The motor control center offered to customers is capable to feed larger loads as it comes with multiple power stabs that support high capacity industrial motor. Followign are the features & applications of our product:

Features :-

1. Simplex & Duplex pattern.
   
2. Degree of Protection :-IP-52 to IP-65.
   
3. Painting: - Powder Coating / Spray Paint / Epoxy Paint.
   
4. Compartmentalized design eliminates risk to maintenance personal.
   
5. Sufficient space for incoming and outgoing cables.
   
6. Provided with buzzer & hooter during emergency.
   
7. Separate Bus bar and cable chambers.
   
8. Motor Control Center shall have hinged door with lockable arrangement
   
9. Motor Control Center shall have detachable gland plates of 2-3mm thick
   
10. Motor Control Center Available with Aluninium / copper bus bar.
    
11. Fabricated with 2/2.5/3mm CRCA sheet steel.
    
12. Motor Control Center is suitable for use on 415V, 3Phase, 4 wire, 50H.z
    

Application :-
These are widely used for :-

1. Protection against electrical Short Circuit, overload and earth fault of the system.
   
2. Control & monitoring of the entire electrical system of an industry / plant.
   
3. Systematic power catering to various load of an electrical system.
   
4. Normally used in Hospitals, Multi-storied buildings, steel industries, cement industry, open –cast mines, shopping mall etc.
   

We manufacture power control centres which can design as per the requirement of the client at most competitive prices.

Features :-

1. Simplex & Duplex pattern.
   
2. Degree of Protection :-IP-52 to IP-65.
   
3. Painting: - Powder Coating, Spray Paint, Epoxy Paint.
   
4. Compartmentalized design eliminates risk to maintenance personal.
   
5. Sufficient space for incoming and outgoing cables.
   
6. Separate Busbar and Cable chambers.
   
7. Fabricated with 2/2.5/3mm CRCA sheet steel.
   
8. Panel shall have hinged door with lockable arrangement
   
9. Power Control Center shall have detachable gland plates of 2/3 mm thick.
   
10. Power Control Center is suitable for use on 415V, 3Phase, 4 wire, 50Hz.
    
11. Provided with buzzer & hotter for emergency.
    

Application :-
These are widely used for :-

1. Protection against electrical Short Circuit, overload and earth fault of the system.
   
2. Control & monitoring of the entire electrical system of an industry / plant.
   
3. Systematic power catering to various load of an electrical system.
   
4. Normally used in Hospitals, Multi-storied buildings, steel industries, cement industry, open –cast mines, shopping mall etc.
   

We manufacture power distribution boards that not only save installation costs but also cost of equipment storage, handling and field testing. Following are the features & application of our product:

Features :-

1. Degree of Protection :-IP-52 to IP-65.
   
2. Painting: - Powder Coating / Spray Paint / Epoxy Paint.
   
3. Compartmentalized design eliminates risk to maintenance personal.
   
4. Sufficient space for incoming and outgoing cables.
   
5. Provided with buzzer & hooter during emergency.
   
6. Separate Bus bar and cable chambers.
   
7. Power Distribution Board shall have hinged door with lockable arrangement
   
8. Available with Aluninium / copper bus bar.
   
9. Fabricated with 2/2.5/3mm CRCA sheet steel.
   
10. Power Distribution Board is suitable for use on 415V, 3Phase, 4 wire, 50Hz, AC supply system.
    
11. Available in Cubicle and Pedestal type.
    

Application :-
These are widely used for :-

1. Protection against electrical Short Circuit, overload and earth fault of the system.
   
2. Control & monitoring of the entire electrical system of an industry / plant.
   
3. Systematic power catering to various load of an electrical system.
   
4. Normally used in Hospitals, Multi-storied buildings, steel industries, cement industry, open –cast mines, shopping mall etc.
   

We offer to our clients a wide range of junction boxes that are manufactured in a variety of metal boxes and non-metallic combinations. Our product features & application include:

Features :-

1. Available in Floor Mounting & Wall Mounting.
   
2. Degree of Protection :-IP-52 to IP-65.
   
3. Painting: - Powder Coating / Spray Paint / Epoxy Paint.
   
4. Junction Box shall have hinged door with lockable arrangement
   
5. Available with Aluninium / copper bus bar.
   
6. Fabricated with 2/2.5/3mm CRCA sheet steel.
   

Application :-
These are widely used for :-

1. Joining / Connection of various electrical wires coming from field and panel side.
   
2. Junction Box ensures connectivity of electrical & electronics of a system.
   

Battery Chargers are used to charge rechargeable batteries time and again. These batteries are available at various current levels. Designed and fabricated with precision, our battery chargers provide a constant voltage and current to charge batteries.

Features :-

1. Accurate float charge to eliminate the possibility of batteries getting overcharged.
   
2. A Change over contactor of emergency lighting and an under voltage alarm is provided in the charger unit.
   
3. Step less control for charging is being provided to ensure quick charging of batteries if discharged during emergency.
   
4. Indication lamp LED type for mains on charging on float/trickle/boost with Voltmeter and Ammeter provided to indicate charging voltage and current.
   
5. Degree of Protection :-IP-52 to IP-65.
   
6. Painting: - Powder Coating, Spray Paint, Epoxy Paint.
   
7. Compartmentalized design eliminates risk to maintenance personal.
   
8. Rubber mat provided for protection against acid spillage.
   
9. The sealed construction, incorporation of the filter float plug ensures that the atmosphere is absolutely acid free.
   

Types :-

1. Float cum boost battery charger.
   
2. Float cum boost with Trickle battery charger.
   
3. Manually operated battery charger with multiple voltage & current.
   

Applications :

1. To charging a battery, specially dry cell unit and to ensure accurate voltage of an electrical system.
   
2. Uninterrupted working of machines & equipments.
   

Current Transformers

A current transformer (CT) is a type of instrument transformer designed to provide a current in its secondary winding proportional to the alternating current flowing in its primary. They are commonly used in metering and protective relaying in the electrical power industry where they facilitate the safe measurement of large currents, often in the presence of high voltages. The current transformer safely isolates measurement and control circuitry from the high voltages typically present on the circuit being measured.
 
Current transformers are used extensively for measuring current and monitoring the operation of the power grid. The CT is typically described by its current ratio from primary to secondary. Often, multiple CTs are installed as a "stack" for various uses (for example, protection devices and revenue metering may use separate CTs). Similarly potential transformers are used for measuring voltage and monitoring the operation of the power grid.

  The accuracy of a CT is directly related to a number of factors including:

• Burden
• Burden Class /Saturation Class
• Rating factor
• Load
• External electromagnetic fields  temperature and
• Physical configuration.
  

Potential Transformers

Protective Current Transformers are designed to measure the actual currents in power systems and to produce proportional currents in their secondary windings that are isolated from the main power circuit. These replica currents are used as inputs to protective relays which will automatically isolate part of a power circuit In the event of an abnormal or fault condition therein, yet permit other parts of the plant to continue in operation.

Satisfactory operation of protective relays can depend on accurate representation of currents ranging from small leakage currents to very high over currents, requiring the protective current transformer to be linear, and therefore below magnetic saturation at values up to perhaps 30 times full load current. This wide operating range means that protective current transformers require to be constructed with larger cross-sections resulting in heavier cores than equivalent current transformers used for measuring duties only. For space and economy reasons, equipment designers should however avoid over specifying protective current transformers ITL technical staff are always prepared to assist in specifying protective CT's but require some or all of the following information:- 

• Protected equipment and type of protection.
• Maximum fault level for stability.
• Sensitivity required.
• Type of relay and likely setting.
• Pilot wire resistance, or length of run and pilot wire used.
• Primary conductor diameter or bus bar dimensions System voltage level.

Our company has all the facilities to manufacture quality electrical insulators with high mechanical strength and outstanding electrical properties.

Types:

1. Disc Insulators Antifog 45 KN B&S, 45 KN T& C.
   
2. LT GUY Insulators
   
3. Pin Insulators.
   
4. Post Insulator.
   
5. Barrel Insulators.
   

Features :-

1. Highly popular for their capability to bear voltage fluctuations.
   
2. Combined Eletro Mech. Strength 45KN to 90KN.
   

Application :-
They are widely used in :-

1. Low Tension Electrical Distribution Power lines.
   
2. Low Tension Electrical service connection power lines.
   
3. Barrel Insulators are also used in Construction of Electrical Panel Board.
   
4. Insulators are used to protect electrical hazards.
   

  Air break drum controllers are manufactured in accordance with customer specification. They are suitable for controlling A.C & D.C motors used in E.O.T cranes, haulages in mines, winches, steel works. Mainly three sizes are manufactured, 40 Amps, 60 Amps, 150 Amps. Provided with stator reversing contacts.
A star wheel and roller arm give definite step location. The crank type-operating handle is provided with off position trigger to prevent accidental starting or unwanted reversing. Operating handle is provided with deadman handle if required by the client Auxiliary contacts are provided for Electrical inter locking.

Arc Shields:
Arc shields are provided on both D.C and A.C. type controllers.
Cable Entry:
Standard cable entry is through a base plate, other type of fittings, can also be provided as per clients desire.
Construction:
Robust construction, top & bottom made of M.S. Plate. The fingertips are made of Hard drawn copper, grinding finish. Removable front cover made of sheet steel.
Drum:
The contact segments are of Hard drawn Electrolytic copper, turned after assembly to maintain concentricity. The contact assembly of controllers fixed on to insulated M.S. Shaft.

 


Concepts in switching technology with miniaturization & sophistication for used in automatic control circuit like master control switch where mechanical positions is translated into electrical signals for controlling remote starters, contactors and work in highly contaminated atmosphere and extremely high shock and vibrating condition. Every Limit Switch goes under rigorous testing before it is supplied. A wide variety to afford a high degree of versatility is available. The range includes:-

• Grab differential limit switch.
  
• Spindle type rotary geared limit switch.
  
• Heavy duty lever type limit switch.
  
• Roller lever.
  
• Counter weight.
  
• Forked lever.
  
• V-shaped lever.
  
• Double Roller lever
  
• Foot Pedal
  
• Heavy duty cam operated Rotary Geared Limit Switch.
  
• Push rod limit switch.
  
• Heavy duty pull cord switch.
  
• Explosion proof limit switch for Hazardous atmosphere.
  
• Heavy duty snap action limit switch.
  

Technical Specification & Features

• Utilisation category: AC 11 & DC 11 as per IEC IS 6875.
  
• Thermal current 10 amp to 40 amps.
  
• Insulation voltage 600 V AC & 240 DC.
  
• Operating temperature – 20ºC to 110ºC.
  
• Mechanical life – 20 million cycle.
  
• Contact life: 10 million cycles.
  
• Terminal capacity: 2.5 mm2.
  
• Operating Torques: 6.804 to 14.968 KLS depending on switch size and cam selected.
  
• Enclosure: IP 67
  
• Characteristics
  
• Oil tight, Water tight & Dust proof.
  
• Time tested, extremely reliable design
  

 

  We are engaged in manufacturing grid resistance boxes of motor and crane control resistors, load banks, resistance banks, neutral grounding cubicles / resistors and a variety of custom built power electrical resistors and associated control panels.
 
Stainless steel grid resistances are highly recommended for use on crane and other machines due to its high mechanical, loss temperature co-efficient of resistance, high resistively, easy adjustability, requirement of less space, long life etc.
 
 
 
Resistance Boxes

Our range of resistance boxes & starting resistors are used for both AC and DC applications. It is widely used for controlling and developing higher torque and have extensively applicable in:

• E.O.T Cranes
  
• Rolling Mills
  
• Steel Plants
  
• Flour Mills
  
• Cement Plants
  
• Power Plants
  
• Coil Mines
  

The grids of our starting resistors are made from stainless steel and punched steel sheet and are suitable for maximum temperature rise of 375 degree C as per BSS standards.