General Laboratory Equipments

Vertical Autoclave

Our vertical autoclave are widely used for the day to day sterilization procedures and in various laboratory applications.We specialize in both standard and customized models, specifically designed to meet the challenging demands of various scientists for individual and specialized research applications. Apart from that we are supplying our economy autoclave in India catering to variety of customers ranging from Defense Installations, Research Laboratories and Educational Institutes and various R&D laboratories of leading national and multinational companies.

Bomb Calorimeter with differential type digital thermometer accuracy 0.01 deg.C with built in timer, connected to electronic firing unit for simultaneous operation as per IS 1360 part II : 1970. The system will consist of the following and instruction manual and ISI Booklet.

01) Bomb with works certificate - 01

02) Calorimeter vessel with bomb support & insulating base - 01

03) Water Jacket - 01 

04) Combined lid for calorimeter vessel & water jacket - 01

05) Stirrer - 01 set

06) Connecting lead for calorimeter bomb - 01 set

07) Fine adjustment valve with built in pressure gauge - 01

08) Connecting tube to connect bomb, pressure gauge and fine regulating valve - 01 

09) Safety Relief Valve fitted on gas filling tube adapter - 01

10) Pellet Press - 01

11) Spanner for Oxygen tube connection - 01

12) Ignition Wire - Nichrome - 01 Roll

13) Cotton Thread - 01 Roll

14) Stand for Bomb Lid - 01

15) Hook for Lifting Bomb - 01

16) Crucible SS  - 01

17) Gas Release Valve - 01

18) Bomb Firing Unit - 01 Set

19) Gelatin Capsules - 01 Bottle

20) Differential Type Digital Thermometer  complete with sensor and instruction sheet - 01 Set

21) Integrated Firing Unit - 01 Set

22) Clamp for Sensor - 01

23) Thermometer for Jacket 50 deg.C - 01

24) Gas Filling System - 01 Set

25) O-ring for bomb & valve - 1 set each

26) Schrader Valve with Key - 1 each

27) Standard Benzoic Acid - 1 Bottle of 200 gm.

NOTE

The user should have Electronic or single pan Balance with 0.1 mg sensitivity, Oxygen Gas cylinder and other relevant Laboratory tools, Instruments and chemicals  for the complete demonstration of the item.

è    Single Disc

è    Double Disc

 

Single Disc, VARIABLE SPEED PORTABLE TYPE

It is compact complete unit with independent driving motor, speed change arrangement, swan neck tap, drain pot, guard, cover and ON/OFF switch. Thus in this machine you have a low priced compact versatile polishing arrangement requiring minimum of maintenance in your laboratory. Portable table top model having stainless steel sink with built in drain pot and sink area and fitted with swan neck tap. The drive is of a 1/4 H.P. T.E.F.C., 220 Volts AC, single phase Motor employing a continuously variable speed mechanism giving speed from 300 to 900 RPM approximately. The disc of 8" dia. bronze push fits on a tapered steel spindle. The spindle runs freely in two ball bearing fitted in the housing. The change of speed is made with the help of a circular control wheel. The machine is supplied with splash guard/ hand rest. disc cover and cloth clamping ring for fixing cloths. Paper clamping ring for fixing papers on the disc, as extra accessory is available.

 

OR

 

-DO- similar to above but with bigger sink for 10"bronze disc and is provided with 1/2 H.P. 220 V AC., T.E.F.C., single phase motor.

 

Double Disc, The machine consists basically of two independent 1/4 HP motor driven two 8" bronze disc over which polishing paper of cloth can be stretched. The discs are easily replaceable, the machine is supplied with two 8" bronze disc which push fits on a tapered steel spindle which runs freely between two ball bearings fitted in the housing, Motors are mounted on a common M.S. frame. The discs operate in basin of fiberglass, which collects the abrasive wastes and removes them out of the system. The discs are also provided with splashguard and cover for protection when not in use. The machine is also provided with swan neck tap, which can be swung on the disc for controlled addition of water during grinding and polishing or swung on to a wash basin for washing the specimen during intermediate examinations. The whole unit is a self contained table with easy accessibility to mechanism. All controls are brought to the front for ease of operation. The machine operates on 220 V AC with a 1/4 H.P., T.E.F.C., single phase motor which provides continuously variable speed from 300 rpm to 900 rpm by means of a circular control wheel.

 

OR

 

-DO- similar to above but with 2 bigger sinks for 10" bronze     discs provided with 1/2 H.P., T.E.F.C., 220 V AC single phase motor.

The equipment is assembled in a mild steel cabinet attractively painted. A central shaft carries a platform with the glass cylinders of 50 ml. each. The platform with the glass cylinders moves up and down at 30 strokes per minutes through a distance of 5 cm and strikes on rubber cushioned bed. Electrically operated, supplied with time switch 0-15 minutes.

Body made of thick PCRC sheet-power coated or stainless steel (S.S.304).Top plate made of heavy C.I. or stainless steel and is fitted with the body in such a way that, the body gets minimum heat while the top plate is fully heated. Supplied complete with pilot indicating lamps, power plug and cord wire to work on 220/230 AC, Single phase. With three heat control switch and energy regulator.

  

Top plate size (cm)

 

  25      X     30

  25      X     40

  30      X     50

  45      X     60

 

Digital Temp. Controller with sensor in place of energy regulator control.

 

SPECIAL NOTE :

 

THE TOP PLATE OF OUR HOT PLATE WILL BE HEAVY CASTED IN C.I. OR S.S. AND NOT FABRICATED FROM M.S.PLATE OR S.S.PLATE

Body made of thick PCRC sheet-power coated or full stainless steel (S.S.304). Top plate made of heavy C.I. or stainless steel (S.S.304) and is fitted with the body in such a way that, the body gets minimum heat while the top plate is fully heated. Supplied complete with pilot indicating lamps, power plug and cord wire to work on 220/230 AC, Single phase. With three heat control switch and energy regulator.

 

Top plate dia

 

20 cm       

23 cm     

30 cm     

 

OPTIONAL FITTINGS

 

Digital Temp. Controller with sensor in place of Energy regulator control.

 

SPECIAL NOTE:

 

THE TOP PLATE OF OUR HOT PLATE WILL BE HEAVY CASTED IN C.I. OR S.S. AND NOT FABRICATED FROM M.S.PLATE OR S.S.PLATE