Metering: These machines are fitted with metering gear pumps driven by separate DC motors, which offers almost infinite variations in output and ratio control within the limits. Temperature controlled by large heat exchangers keeps the component viscosity and quality of foam produced constant. Optional safety cut off in the event of pressure shoot up.

Mixing Head: The new alloy steel hardened mixing head keeps the chemicals separate till the injection port and prevents cross contamination. It can be fitted with various types of mixers for different types of foams and operates with a speed of 8500 or 4200 RPM.

Washing: The solvent and air washing of the mixing chamber are automatic and timer adjustable.

Process Control: The entire sequence can be preset and timer adjustable.

Storage Tanks: Storage tanks are mild steel and have 30 to 100 liters capacity. It can be fitted with agitators and magnetic level switches.

Models:

Model No.	Total Output (LPM)	Power Requirement - In hp
D-5	05	1.25
D-10	10	1.75
D-15	15	2.25
D-30(B)	30	2.75
D-60	60	4.7

Minimum output ------ 20 grams per second
Maximum output ------- 500 grams per second

Power consumption 3.5 Kw 3 Phase
Pumps
This model is fitted with low revolution high accuracy volumetric SS gear pumps. The high torque PMDC motors supported by suitable gear boxes offers very high accuracy in output and ratio control. The low revolution also reduces wear and tear of the moving parts associated with metering. SS 316 MOC and total absence of copper contents prevents component reaction inside the metering pumps.
Temperature Control
This model is fitted with low revolution high accuracy volumetric SS gear pumps. The high torque PMDC motors supported by suitable gear boxes offers very high accuracy in output and ratio control. The low revolution also reduces wear and tear of the moving parts associated with metering. SS 316 MOC and total absence of copper contents prevents component reaction inside the metering pumps.
Temperature Control
Large heat exchangers are provided for instant cooling of the components also built in cooling inside the tank can be provided upon request.
Tanks
240 litre storage tanks are made of mild steel, jacketed and has visual level indicator and drain facility. Non jacketed versions available on request. Different capacity tanks available on request. These tanks can be fitted with agitator/stirrer, minimum/maximum level control and has provision for automatic loading.

Mixing Head
Elastofoam mixing heads are designed to prevent head blockages during foaming operations. The materials re-circulate through two different spools keeping them separate till the injection port to prevent cross contamination. The mixing head is actuated by a double rack pneumatic cylinder valve. The internal of the mixing head is suitably designed for high speed mixing to achieve a homogenous mixture, and splash free pouring into the foaming cavity.

Metering: These machines are fitted with low speed metering pumps driven by geared motors. It offers very high precision in both output and ratio control.

Process Control: The injection pressure is controlled by independent conical jets. These conical jets can be easily replaced.

Storage Tanks: The extended boom gives maximum maneuverability to reach a wide range of pouring positions.

Optional Attachments:

• Safety pressure cutoff.
• Component tank stirrer
• Tank level control


Models:



Model No.	Total Output (GPS)
F-20	100
F-30	150
F-50	200
F-100	300

• Very compact and pre- assembled unit
• Very easy to install operate and maintain
• Designed for continuous duty and high speed production
• High speed mixing and splash free pouring
• Can be fitted with various types of mixers and injection nozzles
• Hardened alloy steel mixing head with material recirculation facility
• Electronic error detection and audio visual warning
• Ratio display
• Very low power consumption
• Omron process control
• Ideal for insulating thermo wares, water coolers ice boxes etc

Minimum shot weight ----5 grams
• Maximum shot capacity – 1500 grams (20 seconds)
• Storage tanks 40 + 40 liters (Higher capacity optional)

Power.

1.75 kw. 3 phase 50/60 Hz

FEATURES

• For moulding bus seat
• Open frame construction
• Easy installation and maintenance
• Designed for continuous duty
• Mixing ratio 1 : 2
• High speed mixing and splash free laminar pouring
• Hardened alloy steel mixing head with material recirculation facility
• Removable pre set jet nozzles
• 15 pouring programs (Standard)
• Specially designed mixer offers better cell structure superior foam quality.

Maximum seat weight 3 kg

Tank Capacity
• 250 + 250 kg.

Power
4 Kw. 3 phase 50/60 Hz

Compact and pre assembled
Easy to install operate and maintain
Open frame construction
Designed for continuous duty
Fully variable ratio
High speed mixing and splash free pouring
Can be fitted with various types of mixers and injection nozzles
Hardened alloy steel mixing head with material re-circulation facility
Electronic error detection and audio visual warning
Suitable for highly viscous materials
Very low power consumption
Low revolution SS volumetric gear pumps
Bonfiglioli gear boxes
Telemechanique frequency drives
Omron process control

Minimum shot weight 20 grams
Maximum shot capacity 6.5 Kg in 20 seconds (20 kg./minute)

Tank capacity
60 + 60
150 + 150
250 + 250
Power required: 2.25 kW. 3 phase 50/60 Hz.

Material: We manufacture our range of drums from high quality 304 & 316 stainless steel. Our wide range of maintenance free drums have a viton seal and teflon gaskets.

Process Control: Our range of drums has a flow control facility. It has a higher precision engineering and no spillage.

Used for: These drums are useful for hazardous and corrosive chemicals, solvents and acids. It is also used for polyurethane systems, fuels and any kind of liquids.