Electrical Corporation, India

• MTL : Electrolytic Copper

• Air Rod can be installed with or without Multiple Point.

• Our customers can avail these products as per their own specifications, designs, samples and diagrams.

 

• MTL : Gunmetal

• For use with appropriate DC Tape Clip. It is used when the installation requires the tape to be secured 75 mm away from the face of the building.

Copper alloy clamps are made from copper alloy body which gives strong resistance to corrosion. These clamps are suitable for Rods of dia. 12 mm.

Above copper bonded grounding Rod can also be made as per customer specification. Copper Bonded Solid Copper Earth Rods Bronze Gun Metal LG2 Grounding Earthing Accessories Phosphorous Bronze Castings cast parts components fittings Clamps Couplers Pipe Clamps Direct Burial Clamps Earthing and Lightning protection Accessories.

Copper bonded earth rod are made from low carbon steel of grade BS 970 or AISI 1018 with a high tensile strength of at least 600 N/mm2. Low carbon steel core are molecularly bonded with 99.9% pure electrolytic copper to a thickness of 250 microns (0.25 mm).

 

Salient Features:

• Perfectly bonded rod will last longer, drive easier and will not crack.
• Corrosion resistance while providing the lowest resistance to ground.
• Threads are rolled by roll threading process, which ensures that an even copper covering is maintained, even at the root of the thread. Roll thread gives greater strength than cut thread.
• Thread rolling process raises the surface of the rod, so that thread dia. (T) is greater than shank dia (S).
  

MTL - Copper Alloy Couplers are made from copper alloy & counter bored to completely enclose threads, protecting them from damage & corrosion.

• MTL : Naval Brass / Gunmetal

• These are used with Bare Copper Tape Conductor.

Features:

• MTL - High Tensile Steel
• These are used to drive the Earth Rod to the Ground.

Earth Rods:

• UL Listed Copper Bonded Bonded Rods
• Grounding Rods
• Copper Bonded
• Solid Copper Rod
• Stainless Steel Rods
• Earth Rod / Cable Clamps
• Couplers
• Bolts
• DC Tape Clip
• Square Tape Clamp
• Flexible Braids
• Cable Clips
• U Bolt Rod Clamp
• U Bolt Rod to Cable Clamp
• B Bond
• Tower Clamp
• Rain Water Pipe Bond
• Watermain Bond
• Aerial Elevation Rod
• Multiple Point
• Terminal Base
• Ridge Saddle
• Universal Cable Connector
• Oblong Test Clamp
• Test Bond
• Cable to Tape Junction Clamp
• Screw down test Clamp
• Tee Clamp
• Jointing Clamp
• One Hole Cable Clip
• Heavy Duty Cast Saddle
• DMC Insulator
• Stranded Copper Conductor
• Copper Tape
• Copper Bus Bar
• Bare Solid Copper Circular Conductor
• Conductor Guard
• Rod Fittings
• Lightning Protection Systems
• Copper Bonded Earth Plates
• Solid Copper Earth Plate
• Lattice Copper Earth Plate
• Conductor Fixings
• Clips & clamps
• Earth Bars & Disconnecting Links
  

Material: Copper, Aluminum, Brass, Gunmetal, Phosphorous Bronze, Galvanized Steel, Etc.

Standard: BS, DIN, ANSI, IEC etc

 

• MTL : Gunmetal

• These are secured to Glazing Bar, Steel Frame, Girdles etc. The Item is designed for use with appropriate size of metalic or non-metallic conductor fixing.

Mechanically claded copper coated grounding rod is made when electrolytic grade 99.9% copper tube with wall thickness of 0.25 (250 microns) is cladded to a low carbon steel rod. Even if the rod is bent by 300, the copper tube should not peel out of the M.S rod.

Copper coated grounding rod can also be supplied with threading & made as per customer specification.

• MTL : Electrolytic Copper

• Multiple Point is used with Elavation rod.

 

• MTL - Gunmetal / Brass

• Used for supporting Lightning Conductor Air Terminals on Ridges.

Solid copper earth rod are made from 99.9% pure electrolytic copper. Solid copper rods offers greater resistance to corrosion. They are ideally used in applications where soil conditions are very aggressive. for eg. soil with high salt content.


Specifications:

 

• These are suitable for Four Way Connections of Copper Tape

• MTL : Brass / Gunmetal.

stainless steel ground rods are used to overcome many of the problems caused by galvanic corrosion which can take place between dissimilar metals buried in close proximity. Other advantages of stainless steel rod are that they are highly resistant to corrosion and are much more anodic than copper.

Packing details :Stainless Steel Ground Rod Earth Ground earthing Grounding rods Earth rods grounding Rods are packed individually in PVC tube bags and rods are fitted with blue caps at both the ends, thus preventing threads getting damaged while handling.


Technical Specifications:

Any dimensional changes in Stainless Steel Pointed Ground Rod are purely the result of our endeavor to constantly improve the efficiency of the Stainless Steel Pointed Ground Rod.

• MTL - Gunmetal / Brass

• Used for supporting Rod to Conductor. Four fixing holes are provided on it.