Electric Control Panel
We manufacture and supply a qualitative range of APFC panels, that are extensively used in various industries. These automatic power factor control panel (apfc) are designed and developed using advanced techniques and are capable of saving maximum power and energy. Fabricated using high-grade rust proof steel, our range is known for reliability and longer life. These APFC Panel are highly efficient and accurately monitor the reactive power in power systems for saving energy and can alter the system voltage as well as current. These panels are also provided with capacitors along with series reactors to minimize the harmonic current.
LT & HT Factories
Air Circuit Breaker Panel
With the help of our sound infrastructure, we are able to design and manufacture premium quality Air Circuit Breaker Panels. These panels are available in varying capacities upto 6400 A with 50 KA breaking capacity. Our range can be offered in different constructions; single or two ACBs in parallel operation.
By using our technically advanced Air Circuit Breaker Panels, the schematic & parallel operation with many generating sources can be achieved. Our range of ACBs includes a distinguished busbar arrangement that ensures proper ventilation and high durability of switchgear parts and other equipment. These panels provide an economical solution in terms of its compact design, efficient distribution and safe switching of large currents.
We offer a range of quality distribution panels that are made up of the best grade components and consists of two 1200 Amp ACB, one 1200 Amp, changeover & four 400 Amp MCCB. Portable and easy to install, our range of panels are appreciated for rugged construction, reliable performance and low power consumption. Owing to high quality and affordable prices, we have gained the position of one of the well known Electrical Distribution Panel Manufacturers.
We manufacture HT Panels suitable for medium voltage levels of 3.3 KV, 6.6KV, 11KV, 22KV, 33KV. It is suitable for fault level of 25KA 3 sec. HT Panels are used for operation of potential transformers, capacitors and motors.
Our organization is instrumental in designing and manufacturing a wide gamut of HT Panels. We offer superior quality Isolator/LBS and C/O SW HT Panels, which are highly efficient in meeting the various needs upto 33 KV. These HT Panels are kinds of indoor/outdoor type Air/sf6 gas-based LBS/ISOLATOR up 36 kv, 20 Ka, 630 amp, 3 ph range medium voltage products with having simple and effortless switching with mechanical status indicator.
These panels are available in three different positions like closed, open, and earthed that represent a natural interlocking system, which prevent incorrect operation POWER FUSES incorporate as required.
- Separate compartment for metering/ voltage trafo/ busbar/ cables
- Completely compartmentalized construction with IP4X/5X degree of protection
- Used for backup protection of power transformers, generation, capacitor banks
Bus Trunking Panel
Presenting a range of bus ducts and rising mains that are available upto 4000 A, which can be operated with less than 35 degree celsius temperature rise over an ambient of 40 degree celsius. Their short circuit withstands capacity falls at 50kA. The non-segregated Bus Ducts with inter leaving design are aptly designed for indoor and outdoor installation with IP: 55 degree of protection. All our bus duct systems are type tested. ENTRACO is major exporter of bus duct system & its complete solution with erection & commissioning services. We are pioneer in design, engineering & manufacturer of various types of bus ducts and bus trunking systems like:
· Phase segregated & non segregated metal enclosed bus duct
· Super compact
· Sandwich type bus duct
· Super compact, resin cast IP 68 bus duct
· Canallies system for lighting & low power distribution ranging from 40 Amp. to 120 Amp.
Recent introduction of canalized bus duct:
· A complete bus duct & bus trunking system range is offered by ENTRACO with complete end to end design, engineering & erection services.
· Metal enclosed (CRCA / Aluminum sheet) air insulated LV bus duct 1000 V ranging from 1000 Amp. to 6000 Amp.
· HV bus duct – 11 kV / 22 kV / 33 kV – metal enclosed, segregated phase and non-segregated phase bus duct system ranging from 600 Amp. to 4000 Amp.Super compact, IP 68, resin cast bus duct from BKS stromschienen Ag , Switzerland as their exclusive authorised representative for india & Sub- continent region for sandwich bus duct ranging from 100 Amp. to 4000 Amp.
We are engaged in fabricating LT Panels that are designed for digital power monitoring with change over provision for incoming and outgoing. Fabricated under the close supervision of experienced engineers, these panels are of durable finish and are optimum in quality.
We are engaged in fabricating LT Panels that are designed for digital power monitoring with change over provision for incoming and outgoing. Fabricated under the close supervision of experienced engineers, these panels are of durable finish and are optimum in quality. Further, these panels are also available in MCCB / SFU / MCB outgoings as per the clients’ specific requirements.
We offer MCC Panels that are designed for the distribution of power, main incoming and motor control panels. These MCC Panels are designed with utmost care and stringent quality inspection to ensure client satisfaction. This range is available in standard as well as in customized size.
Some of the salient features of this range are:
Easy to operate
Power Control Panel
Our organization has gained specialization in offering a variety of Power Control Panels. These panels are extensively used LT & HT factories and windmills as these are precisely designed using cutting-edge technology to meet the industrial environment. Having auto-manual options, Power Control Panels offered by us are designed in compliance with IE rules.
- Back up protections are MCCB having ideal breaking capacity (k A) that eliminates HRC fuse replacements.
- The complete panel is fuse-less. Thus, there is no operation & maintenance cost involved.
- Reliable in maintaining PF from 0.95-0.99.
P F Control Panel
P.F. Control Panels
We We are one of the leading manufacturer and supplier of P.F. Control Panels that are widely used in various industries and mills. These panels are used for correcting the power factor of the load with inductive lagging PF. The power factor control panel uses the concept of sensing the load current, voltage, phase difference between them and then analyzing the system using microprocessor and correcting the phase angle between the voltages.