We offer improved and reliable Electronic Traction Unit. It is enabled with the feature of a safety switch and audio visual alarms. It can be attached with standard accessories like cervical collar and lumbar belt etc.

Technical Specification

Traction Force	5 to 45 kgs with couber up to 90 kgs.
Hdd time	20, 45, 60, 80 secs.
Rest time	1, 5, 10, 20 sec
Treatment time	60 mtrs with digital display
Alarms	Activated by patient safety switch At he end of treatment time.
Mounting	Table, wall mount or cot mount
L x B x H	33 x 28 x 29.5 cms
Weight	10 kgs
Voltage	220V, 50 Cycles AC

This is a microprocessor based electronic equipment for inferential therapy, muscle stimulation and tens. It has a soft touch membrane keyboard, provided for easy operation.

Technical Specification

Output	2 separate outputs channel I & II
Output Current	0-90 mA
Output Frequency	Channel 4000 Hz 4250 Hz depending on the base & Spectrum control selection is also provided to avail 2000 Hz as basic frequency
Interference Frequency	Base -0 Hz – 100 Hz Spectrum -0 Hz-150 Hz
Interference Spectrum Indicator	Front panel green Bar Graph indicator
Vector Scanning	45 & 90·
Power Consumption	50 Watts
Dimension ( in mm)	100 x 320 x 305
Weight	3.5 kgs

It is a versatile product which is not only sleek and compact in design but also easy to handle. Continuous and pulsed models can be easily selected in this device. It also has an indicator that shows the ultrasonic power delivered to the patient.

Technical Specifications

Ultrasonic Nominal Frequency	1 Mhz
Ultrasonic output	15 Acoustic watts Max.
Ultrasonic power density	2.5 Watts / cm²
Mode of Operation	Continuous & Pulsed 0 to 20 minutes electronic timer with digital display. Audio alarm at the end of treatment

We offer ultra sound therepy unit which is most mordern in design and easy to handle. It has the feature of easy selection of continuous and pulsed modes. Its nominal frequency is around 3MHz and an ultrasound output of 15 Acoustic watts maximum. Technical Specification

Ultrasound nominal frequency	1 Mhz
Ultrasound output	15 Acoustic watts Max.
Ultrasound power density	2.5 Watts / cm²
Mode of Operation	Continuous & Pulsed 0 to 20 minutes electronic timer with digital display. Auto alarm at the end of treatment.

This device has an advanced microprocessor that provides therapeutic efficacy. It has a computerized LCD screen with interactive controls. It is enabled with two probes such as visible red probe and infra red probe.

Technical Specification

Mains Supply	230 V/ AC / 50 Hz
Power Consumption	15 Watts
Mains fuse	1 Amp
Treat Time	Max – 99 min
Frequency	0.6 to 300 Hz
Wave length Infrared	980 mm / 100 mw
Visible Red Laser	655 mm / 20 mw

This is a modular and sturdy unit that simplifies the treatment of electrode in electrical therapy. This unit is used together with a stimulation current unit to give proper output.

Technical Specification

Mains Input	220 V/ 50 Hz
Power Consumption	46 Watts
Main Fuse	1 Amp x 2
Input	Four banana jacks for electrical Input
Output	Four pneumatic connector for Electrical & reduced pressure Coupling
Vacuum	0 to 600 m Bar
Pulsation	10 to 60 Pulse / min.
Dimension	Height x Length x Depth – 105 x 310 x 3000 ( in mm
Weight	8 kg.

This unit is a versatile solid state laser output, with visible red at 655nm wavelength and infrared laser at 830nm. This machine is very useful for treating patients with pain, inflammation, pressure, sores and ulcers.

Technical Specification

Visible Red Laser	Solid State 655 Nm Wave Length
Power Output	24 MW
Infra Red	Solid State 830 NM Wave Length
Power Output	120 MW
Output	Cont / Pulsed

This is a very useful equipment for joint treatment. It is based on the concept which was given by Salter in 1970. This device has found application in different types of treatments.

Technical Specification

1. Treatment Time	0-99 minutes
2. Rest Time	1 to 5 Seconds
3. Angle	Extension 0· to 70 · Flexion 10· to 120·
4. Power	230 V / AC / 50 Hz, 75 VA

This a computerized device that is enabled with an advanced microprocessor. This device is based on 69 programme for muscle stimulation. This is a very user friendly and simple unit.

Technical Specification

Mains Supply	240 V/ AC / 50 Hz
Power Consumption	46 Watts
Main Fuse	1 amps
Weight	3 kgs.

Anavent is a electronically controlled, pneumatically operated Anaesthesia Assistor. It can be used with all types of Anaesthesia Apparatus. The buitl-in electronic pressure graph indicates the pressure at which the gas is delivered to the patient. With very few controls on the front panel, the operation of the equipment is easy. Pneumatic engine can give a peak flow of 100 lpm.

Technical Specification

Power input	220v 50 Hz
Tidal Volume	100 to 1200 ml
Sigh	1.5 times Tidal volume
I/E Ratio	1:2
Safety pressure	60 m bar
Freqency	8 to 40 cycles per min
Pressure Indicator	LED bar graph display
Pneumatic requirement	3 bar pressure

We offer high power shortwave diathermy unit that is mounted on wheels for easy mobility. It is also enabled with disc and pad electrodes for easy handling of the equipment.

Our verastile ventilator is offered by us under the brand name of Orion. It has found applications in Intensive Care nad Emergencies. It has a tidal volume of 50 to 1500 ml and peak flow of around 180 Ltrs/min. We offer different models of ventilators with a variety of alarms.