We offer a wide range of electromagnetic flow meters, which are used for various industrial applications. Our flow transmitters measure the flow rate of conductive liquids and slurries in closed pipes. With their simple and rigid designs, our electromagnetic flow meters offer an obstruction less and maintenance free instrument as compared to conventional mechanical flow measuring device. These are based on Faraday's law of electromagnetic induction. Features · Microprocessor based. · Simple & cost effective construction. · Provides wide flow ranges. · Outstanding accuracy. · Operates over wide ranges of temperature & pressure. · Flame-proof, IP-65, IIA, IIB CMRI certified enclosure housing. These are offered, Insertion type and Full Bore type models and the model names are ELMAG-100, ELMAG-200 and ELMAG-200M. These models offered following technical specifications:

Media	Liquids (Clear)
Viscosity	200 cp max
Line Size	15 NB to 300 NB
Excitation	Pulsed DC coil
Type of Output	4 to 20 mA DC
Calibration Range	As per requirement (Factory Calibrated)
Accuracy:	/- 0.5% F. S.
Linearity	/- 0.5%
Repeatability	/- 1%
Process Temperature	150 0C max.
Process Pressure	10 kg/cm2 max
Material of construction	Lining - Neoprene / Rubber / PTFE (Teflon) Flange - MS / SS Electrode, Wetted Parts - SS 316 Body - MS
Power Supply	230 V AC, 50 Hz /- 10% 24 V DC, External
Power Consumption	< 10 VA
Response Time	< 100 mSec

We offer a wide range of turbine flow meters and rotameter, which are ideal for measuring sensitive repeatable indication of consistent flow rate. Features: · Rota meter along-with 8 x 1 LCD local display · Battery Operated · Simple & cost effective construction · Wide flow ranges · Outstanding accuracy · Easy to maintain · Flame-proof, IP-65, IIA, IIB CMRI certified housing The various models offered are: FL-100, FL- 104, Fl-106, FL-200 and FL-204. These are offered in following specifications:

Media	Liquids (Clear)
Viscosity	100 cp max
Pick off Type	Magnetic sensor
Line Size	15 NB to 150 NB
Display	4 digit, 0.3" Red LED for Flow
Type of Output	4 to 20 mA DC, 2 wire
Calibration Range	As per requirement (Factory Calibrated)
Accuracy	/- 1% F. S.
Linearity	/- 1%
Repeatability	/- 1%
Pressure Drop	Approx. 0.28 kg/cm2 at max. Flow
Turn down ratio	10 : 1 to 100 : 1
Process Temperature	0 to 150 0C
Process Pressure	0 to 30 kg/cm2
Material of construction	Body, Bearings, Support & Flange - SS 316 / Teflon Rotor - SS 410 / SS 410 with Teflon coating Shaft - tungsten carbide
Power Supply	Loop powered, 24 V DC excited
Response Time	< 100 mSec
Transmitter Enclosure	Flame-proof, IP-65, IIA, IIB CMRI certified
Process Connections	Flanged (2" ASA 150 # RF) / Threaded (1" BSP-M)
Mounting	In-Line (Horizontal OR Vertical)

We offer superior quality and precision temperature instruments, which are used for measuring temperature with easy. These are offered in four models namely TT-01, TT-04, TG-20 and DTX-700. The Temperature Gauges are provided with shut-off facility so that display can be turned on. Features · On-line measurement · Dedicated input · Cold junction compensation for thermocouple input These can be availed with the following technical specifications:

Type of Input	Dedicated RTD (Pt-100 / Pt-200 / CU-53) 2 or 3 wire Thermocouple (J / K type)
Type of Output	4 - 20 mA DC, 2 wire non-isolated
Accuracy	/- 0.5% F. S.
Power Supply	24 V DC, External
Power Consumption	< 40 Mw
Response Time	< 500 mSec
Enclosure	Aluminium Die Cast
Dimensions	45 mm (Ht) x 30 mm (Dia)
Mounting	Head Mounting
Weight	250 gms

We offer precise Conductivity transmitters used for various industrial applications. It can accept input from conductivity electrode of cell constant 1 / 0.1 / 0.01 & conductivity signal is transmitted in the form of electrical 4 - 20 mA signal. The on-line conductivity indication is provided through LCD. Span/Zero adjustments are easily accessibly.

Features:
. On-line measurement.
· 2 wire system.
· 4-20 mA DC output.
· Auto/Manual temperature compensation.
· On-Line indication through LCD display.
· Flame-proof, IP-65, IIA, IIB CMRI certified housing

Offered in four different models namely DO-01, CT-01, CT-801 and CS-01. The Model CT-001 with the following specifications:

Type of Input	From Conductivity Electrode
Cell Constant	0.01 / 0.1 / 1
Type of Output	4 - 20 mA DC, 2 wire Isolated
Display	8 x 1 LCD
Calibration Range	Factory Calibrated 0 to 100 mS for cell constant 0.01 0 to 1000 mS for cell constant 0.1 0 to 10000 mS for cell constant 1
Temperature Compensation	Auto / Manual through RTD, Pt 100 sensor for 0-100 0C
Accuracy	/- 0.25% F. S.
Power Supply	24 V DC, External
Enclosure	Flame-proof, IP-65, IIA, IIB CMRI Certified
Dimensions	135 (H) x 182 (W) including cable gland x 170 (D) in mm approx.
Process Connections	3/4" ET
Mounting	2" Pipe Mounting

We offer precise level instruments, which are used extensively to monitor and measure level of the fluids.

Features:
· Simple, low cost & reliable.
· Easy operation
· Flame-proof, IP-65, IIA, IIB, CMRI Certified housing.

Offered in four different models namely LMT-01, LMS-02, LCT-01 and LCS-02. Following are specifications for Model LMT - 01.

Probe Length	As per requirement (max 3 mtr.)
Type of Output	4 to 20 mA DC, 2 wire
Accuracy	/- 10 mm
Linearity	/- 0.5% for 3000 mm probe length
Process Temperature	250 0C max
Process Pressure	30 kg/cm2 max
Probe MOC	SS 316
Power Supply	24 V DC, External
Transmitter Enclosure	Flame-proof, IP-65, IIA, IIB, CMRI Certified
Process Connections	Flanged / Threaded
Mounting	Top of the tank

OPTIONAL

Local Display

8 x 1 LCD

We offer precise loop powered bargraph indicator, which is designed to serve various industrial applications. These are used extensively for monitoring various parameters such as temperature, pressure, flow, speed, level and many more.


· 101/51 segment Bar-Graph Indication
· Dual/ Single channel
· Universal/ 4-20mA input
· Software calibration

These are offered in three different models namely LPI-016, DPI-160 and DIAM- 151. Following are specifications for Model DIAM-151.

Input	4 - 20 mA DC
Display	4 digit, 0.3”, 7 seg. Red LED
Range	Programmable through front membrane keypad from -999 to 9999
No. of Segments	51 segments
Accuracy	Better than 0.1% of F. S.
Power Supply	Self powered from input
Drop Voltage	Approx. 3.6 V DC @ 4 mA
Enclosure	MS Powder Coated (DIN std) / MS Fabricated Box
Size	96 (H) x 96 (W) x 60 (D) in mm approx. / 108 (H) x 45 (W) x 115 (D) in mm approx.
Mounting	Flush of the Pane
Weight	250 gms. Approx.

OPTIONAL

Alarm Output	DC SSR Contact - 2 nos. Configurable for high & low
Contact Rating	1 c/o,1 Amp.@ 24 V DC / 48 V DC

We offer superior quality PH/ORP indicator designed for various industrial applications. These are widely used for monitoring pH / ORP of a solution.

Features:
· Single channel
· Input from pH/ORP electrode OR from transmitter
· Open sensor indication
· Software calibration

Offered in two different models namely PH-001, PH-104. Following are specifications for Model PH-104.

Type of Control	ON / OFF
No. of Input	01 No.
Type of Input	From pH / ORP Electrode (compatible to any make electrode) 4 - 20 mA DC from pH / ORP Transmitter
Display	4 x 2, 0.5" LED
Range	0 - 14 pH
Accuracy	Better than 0.05 pH
Power Supply	230 V AC, 50 Hz /- 10%
Response Time	< 1000 mSec for electrode input & < 100 mSec for transmitter input
Isolation	1.4 KV between Input, Output & Power Supply
Enclosure	MS Powder Coated
Dimensions	96 (H) x 96 (W) x 200 (D) in mm approx.
Mounting	Flush of the Panel
Weight	1.5 kg (Approx.)

OPTIONAL

Transmitter Supply	24 V DC, 30 mA
Retransmission Output	4 - 20 mA / 1-5 V, Isolated
Alarm Output	Potential free Relay Contact - 2 nos. (1 c/o, 1 Amp. @ 230 V AC) Configurable for high & low
Communication Port	RS 485 / RS 232 supporting MODBUS RTU protocol

ACCESSORIES (on demand)
. Temperature Compensation Sensor : RTD, Pt 100 (0 - 100 0C)
. Flow Through Assembly SS / PP
. Electrode Cleaning System : SS / PP

We offer precision engineered flow indicator totalizer, used extensively for a number of industrial applications. These are used for indicating and totalizing the flow.

Features
· Temperature-Pressure compensated Flow
· Indication through LCD/ LCD
· Normal mode for operation
· Programmable low flow cut-off
· Software calibration

Offered in models, namely FL-600 PTC, FL-600, FL-602, FL-603, FL-700 and FL-700PTC, with the following technical specifications:

Operating Modes	Normal / Batch
No. of Input	01 No./ 03 No.( in case of temperature pressure compensated)
Input	Linear / Square Rooted / 10 Point Linearisation Table
Display	LED/ LCD
Range	Programmable (0 to 9999)
Accuracy	Better than 0.25% of F. S.
Open Sensor Indication	Provided
Power Supply	230 V AC / 24 V DC / 110 V AC / 24 V AC
Power Consumption	Less than 10 VA
Temperature Drift	< 0.01% of F. S. per 0C change
Response Time	< 100 mSec
Isolation	1.4 KV between Input, Output & Power Supply
Enclosure	MS Powder Coated
Mounting	Flush of the Panel
Operating Conditions	Temperature 0 to 55 0C / Humidity 5 to 95% non condensing

OPTIONAL

Transmitter Supply	24 V DC, 30 mA
Retransmission Output	4 - 20 mA / 1-5 V, Isolated
Alarm Output	Potential free Relay Contact - 2 nos. (1 c/o, 1 Amp. @ 230 V AC)Configurable for high, low
Communication Port	RS 485 / RS 232 supporting MODBUS RTU protocol

It is designed to measure, monitor and control different parameters such as temperature, humidity, pressure, flow, speed, level and many more.

Features:
· ON/OFF controller
· Dedicated/ Universal input
· Cold junction compensation for Thermocouple input
· Open sensor indication
· Software calibration

Offered in models namely TX-700, DPC-808, DPC-300, DPC-200 and DPC-100 with the following specifications:

Type of Control	ON / OFF
No. of Input	01 No
Input	Dedicated/ Universal RTD (Pt-100 / Pt-200) 2 or 3 wire , Thermocouple (J / K / R / S / T / B / E type), Current (0-20 mA / 4-20 mA), Voltage (0-5 V DC / 1-5 V DC)
Display	4 digit, 0.8", 7 seg. Red LED
Range	Programmable for mA & Voltage (-1999 to 9999), Fixed for all types of RTD & TC
Accuracy	Better than 0.5% of F. S. For R, S & B type Thermocouple & /- 0.25% of F. S. For rest inputs
Open Sensor Indication	'OPEN' on display for RTD & TC input
Power Supply	90 to 260 V AC / 24 V DC
Power Consumption	< 10 VA
Temperature Drift	< 0.01% of F. S. per 0C change
Response Time	< 100 mSec
Isolation	1.4 KV between Input, Output & Power Supply
Dimensions	96 (H) x 96 (W) x 160 (D) in mm OR 48 (H) x 96 (W) x 160 (D) in mm approx.
Mounting	Flush of the Panel
Operating Conditions	Temperature 0 to 55 0C / Humidity 5 to 95% non condensing

OPTIONAL

Transmitter Supply	24 V DC, 30 mA
Alarm Output	Potential free Relay Contact - 2 nos. (1 c/o, 1 Amp. @ 230 V AC)

We offer precision made and accurate process scanners, which are offered with operating parameter control through front membrane keypad. Features:

Individual alarm output for each channel
Long lasting battery backup for memory 
PC communication supporting MODBUS RTU protocol
Parallel printer port.

These are provided with the following specifications:

Input	Dedicated / Universal RTD (Pt-100) 2 or 3 wire 2) Thermocouple (J / K / R / S types) mA ( 4-20 mA/0-20mA) Voltage (0-5 V / 1-5 V) mV (0-100 mV)
Display	4 digit, 0.5” Red LED for Process Value, 2 digit, 0.5” Red LED for Channel Number & 5 digit, 0.3” Red LED for Engg Unit
Range	Programmable -999 to 9999 for mA & Voltage & Fixed for all types of RTD & Thermocouple
Display Scan Time	Programmable from 1 to 99 seconds
Power Supply	230 V AC, 10%, 50 Hz single phase
Accuracy	Better than 0.5% F. S. For R & S type Thermocouple & 0.1% F. S. For rest inputs
Common Alarm Output	Potential free Relay contacts - for high & low (1 c/o, 1 Amp @ 230 V AC)
Response Time	< 100 mSec
Isolation	1.4 KV between Input, Output & Power Supply
Mounting	Flush of the Panel

We offer Calibrator provides features & functionality which is not found in other calibration equipment. These are ideal for use in the field or the laboratory. These are high precision field diagnostic tool for troubleshooting your most difficult process applications.

Features

· 8 Bit Microprocessor
· Large, easy to read LCD display.
· Industrial standard binding post terminals for easy field wiring.
· Scaled linear signals to desired engineering units.
· True one-hand operation. Offered in models namely CAL-01 and CAL-100.The Model CT-001 with the following specifications:

Modes of operation	Source & Sink
Signals for Operations	RTD (Pt 100, Pt 200, CU 53) TC (J, K, R, S T, B, E types) mV (-200 to 200 mV for sink mode & -100 to 100 mV for source mode) mA (0 to 24 mA) V (0 to 10 V)
Common mode rejection	> 120 dB at AC operation
Normal mode rejection	> 60 dB at 50 or 60 Hz
Temperature Stability	/- 0.01% per 0C
Input-output isolation	500 V AC/DC
Display	LCD, 16 x 2 display with backlit
Accuracy	/- 0.05% overall for all parameters
Linearity	0.05%
Power Supply	External AC Supply (universal 90 to 270 V AC) OR Internal rechargeable Ni-cd Battery (12 V, 1.2 Ah) with charger (Operational time with Battery 6 hrs. & recharging time 12 hrs. upto 90%)
Transmitter Supply	24 V DC, 30 mA
Mounting	Table top Mounting
Accessories	Resin carrying case, Banana Cables, Mains Chord

We provide a variety of signal isolators with single output,dual output specially used for various industrial applications. It can monitor all kinds of input such as RTD, thermocouple, current, voltage and offers output in two isolated terms of current and voltage. Features: · Signal conversion with Isolation · Dedicated/ Universal Input · Accuracy @ 0.25% F. S · 24 V DC Operated · Compact size & easy maintenance · Din Rail Mount · Reliable & Cost effective system We offer a wide range of signal isolators, which are offered in five different models namely TX-00, TX-10, TX-20, TX-20 M and TX- 100. Following are the technical specifications of the model TX-20M:

No. of Input	01 No.
No. of Output	02 Nos.
Type of Input	Universal (max. 6 selections of input types) RTD (Pt-100 / Pt-200 / CU-53) 2 or 3 wire Thermocouple (J / K / R / S / T / E type) Current (0-20 mA / 4-20 mA) Voltage (0-5 V DC / 0-10 V DC)
Type of Output	Dedicated Isolated mA (0-20 mA / 4-20 mA) Isolated Volt (0-5 V DC / 1-5 V DC)
Accuracy:	/- 0.5% F. S. For R & S type Thermocouple & CU 53 input & /- 0.25% F. S. For rest inputs
·Isolation	1.4 KV between Input, Output & Power Supply & between Output to Output
·Power Supply	230 V AC, 50 Hz /- 10% 24 V DC, External
·Response Time	< 500 mSec
.Enclosure	ABS, Plastic
·Dimensions	75 mm (H) x 55 mm (W) x 110 mm (D)
·Mounting	Din Rail Type